- 您现在的位置：买卖IC网 > PDF目录13119 > MAX1518BETJ+ (Maxim Integrated Products)IC DC-DC CONV TFT-LCD 32-TQFN PDF资料下载
参数资料
| 型号： | MAX1518BETJ+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 10/25页 |
| 文件大小： | 0K |
| 描述： | IC DC-DC CONV TFT-LCD 32-TQFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 60 |
| 应用： | 转换器，TFT，LCD |
| 输入电压： | 2.6 V ~ 6.5 V |
| 输出数： | 1 |
| 输出电压： | 2.6 V ~ 13 V |
| 工作温度： | -40°C ~ 100°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 32-WFQFN 裸露焊盘 |
| 供应商设备封装： | 32-TQFN-EP（5x5） |
| 包装： | 管件 |
TFT-LCD DC-DC Converter with
Operational Amplifiers
Pin Description (continued)
PIN
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
NAME
OUT4
POS5
NEG5
OUT5
LX
IN
FB
COMP
FBP
DRVP
FBN
DRVN
DEL
CTL
DRN
COM
FUNCTION
Operational-Amplifier 4 Output
Operational-Amplifier 5 Noninverting Input
Operational-Amplifier 5 Inverting Input
Operational-Amplifier 5 Output
n-Channel Power MOSFET Drain and Switching Node. Connect the inductor and Schottky diode to LX
and minimize the trace area for lowest EMI.
Supply Voltage Input. IN can range from 2.6V to 6.5V.
Step-Up Regulator Feedback Input. Regulates to 1.236V (nominal). Connect a resistive voltage-divider
from the output (V MAIN ) to FB to analog ground (AGND). Place the divider within 5mm of FB.
Step-Up Regulator Error-Amplifier Compensation Point. Connect a series RC from COMP to AGND.
See the Loop Compensation section for component selection guidelines.
Gate-On Linear-Regulator Feedback Input. FBP regulates to 1.25V (nominal). Connect FBP to the
center of a resistive voltage-divider between the regulator output and AGND to set the gate-on linear-
regulator output voltage. Place the resistive voltage-divider close to the pin.
Gate-On Linear-Regulator Base Drive. Open drain of an internal n-channel MOSFET. Connect DRVP to
the base of an external pnp pass transistor. See the Pass-Transistor Selection section.
Gate-Off Linear-Regulator Feedback Input. FBN regulates to 250mV (nominal). Connect FBN to the
center of a resistive voltage-divider between the regulator output and REF to set the gate-off linear-
regulator output voltage. Place the resistive voltage-divider close to the pin.
Gate-Off Linear-Regulator Base Drive. Open drain of an internal p-channel MOSFET. Connect DRVN to
the base of an external npn pass transistor. See the Pass-Transistor Selection section.
High-Voltage Switch Delay Input. Connect a capacitor from DEL to AGND to set the high-voltage
switch startup delay.
High-Voltage Switch Control Input. When CTL is high, the high-voltage switch between COM and SRC
is on and the high-voltage switch between COM and DRN is off. When CTL is low, the high-voltage
switch between COM and SRC is off and the high-voltage switch between COM and DRN is on. CTL is
inhibited by the undervoltage lockout and when the voltage on DEL is less than 1.25V.
Switch Input. Drain of the internal high-voltage back-to-back p-channel MOSFETs connected to COM.
Internal High-Voltage MOSFET Switch Common Terminal. Do not allow the voltage on COM to exceed
V SRC .
10
______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| AMM11DRAH | CONN EDGECARD 22POS .156 R/A |
| MAX8810AETM+ | IC CNTRLR PWM W/MOSFET 48TQFN |
| A8287SLBTR-T | IC LNB SUPPLY/VOLTAGE REG 24SOIC |
| 1782-15J | COIL RF .62UH MOLDED UNSHIELDED |
| VI-J6X-CX | CONVERTER MOD DC/DC 5.2V 75W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX1518BETJ+ | 功能描述:LCD 驱动器 TFT-LCD DC-DC Conv w/Op Amps RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| MAX1518BETJ+T | 功能描述:LCD 驱动器 TFT-LCD DC-DC Conv w/Op Amps RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| MAX1518ETJ | 功能描述:LCD 驱动器 RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| MAX1518ETJ+ | 功能描述:LCD 驱动器 TFT-LCD DC-DC Conv w/Op Amps RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| MAX1518ETJ+T | 功能描述:LCD 驱动器 TFT-LCD DC-DC Conv w/Op Amps RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。