参数资料
型号: MAX17000EVKIT+
厂商: Maxim Integrated Products
文件页数: 15/32页
文件大小: 0K
描述: KIT EVAL FOR MAX17000
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 1
主要目的: 特殊用途 DC/DC,DDR 存储器电源
输出及类型: 3,非隔离
功率 - 输出: 19.8W
输出电压: 1.8V,0.9V,0.9V
电流 - 输出: 10A,2A,3mA
输入电压: 7 ~ 20 V
稳压器拓扑结构: 降压
频率 - 开关: 300kHz
板类型: 完全填充
已供物品:
已用 IC / 零件: MAX17000
MAX17000
Complete DDR2 and DDR3 Memory
Power-Management Solution
Table 3. Operating Mode Truth Table
SHDN
STDBY
SKIP
OPERATION
SMPS output ramps up in skip mode with a 1.4ms (typ) ramp time. PGOOD1 is held low until the
1
L
H
L
H
X
SMPS output is in regulation.
VTT and VTTR ramp up to the final voltage based on V CSL /2 or V REFIN . PGOOD2 is held low until
VTT is in regulation.
SMPS output ramps up in skip mode with a 1.4ms ramp time. PGOOD1 is held low until the SMPS
output is in regulation.
2
L
H
L
X
Once CSL or FB is in regulation, the PWM block turns off and enters standby mode.
VTT remains off throughout since STDBY is low. PGOOD2 stays low throughout. The VTT
discharge FET is enabled if OVP is high, but disabled if OVP is low.
VTTR ramps up to the final voltage based on V CSL /2 or V REFIN .
Ultra-skip and standby modes are exited and the full current capability of the MAX17000 is
available.
3
H
L
H
X
VTT ramps up after the internal SMPS block is ready. VTT ramps to the final voltage based on
V CSL /2 or V REFIN .
PGOOD2 goes high when VTT is in regulation.
SMPS output is in forced-PWM mode.
4
H
H
H
VTT and VTTR are enabled.
PGOOD1 is high when the SMPS output is in regulation.
PGOOD2 is high when VTT is in regulation.
SMPS output is in normal skip mode.
5
H
H
L
VTT and VTTR are enabled.
PGOOD1 is high when the SMPS output is in regulation.
PGOOD2 is high when VTT is in regulation.
SMPS output is in ultra-skip mode.
6
H
L
X
VTT is off and is high impedance.
PGOOD2 is forced low.
VTTR is active and regulates to V CSL /2 or V REFIN .
7
H
L
H
X
Ultra-skip or skip mode is exited as the MAX17000 ramps the output down to zero.
VTTR tracks V CSL /2 or V REFIN during shutdown. After the SMPS output reaches 25mV, DL goes low.
Ultra-skip or skip mode is exited as the MAX17000 ramps the output down to zero.
8
H
L
L
X
VTTR tracks V CSL /2 or V REFIN during shutdown. After the SMPS output reaches 25mV, DL goes
low. VTT is not enabled throughout soft-shutdown.
9
L
X
X
DL low. Internal16
OVP is low.
discharge MOSFETs on CSL and VTT enabled if OVP is high, but disabled if
Maxim Integrated
15
相关PDF资料
PDF描述
RS3-4809DZ CONV DC/DC 3W 20-60VIN +/-09VOUT
100R08-305B CABLE FLAT FLEX 8POS 1MM 12"
MAX8792EVKIT+ KIT EVAL FOR MAX8792
R1S-3.324 CONV DC/DC 1W 3.3VIN 24VOUT
MC33996EKR2 IC SWITCH 16-OTPT W/SPI 32-SOIC
相关代理商/技术参数
参数描述
MAX17000EVKIT+ 功能描述:电源管理IC开发工具 MAX17000 Eval Kit RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V
MAX17003AETJ+ 功能描述:电压模式 PWM 控制器 Quad Out Main Power Supply Controller RoHS:否 制造商:Texas Instruments 输出端数量:1 拓扑结构:Buck 输出电压:34 V 输出电流: 开关频率: 工作电源电压:4.5 V to 5.5 V 电源电流:600 uA 最大工作温度:+ 125 C 最小工作温度:- 40 C 封装 / 箱体:WSON-8 封装:Reel
MAX17003AETJ+T 功能描述:电压模式 PWM 控制器 Quad Out Main Power Supply Controller RoHS:否 制造商:Texas Instruments 输出端数量:1 拓扑结构:Buck 输出电压:34 V 输出电流: 开关频率: 工作电源电压:4.5 V to 5.5 V 电源电流:600 uA 最大工作温度:+ 125 C 最小工作温度:- 40 C 封装 / 箱体:WSON-8 封装:Reel
MAX17003ETJ+ 功能描述:电压模式 PWM 控制器 Quad Out Main Power Supply Controller RoHS:否 制造商:Texas Instruments 输出端数量:1 拓扑结构:Buck 输出电压:34 V 输出电流: 开关频率: 工作电源电压:4.5 V to 5.5 V 电源电流:600 uA 最大工作温度:+ 125 C 最小工作温度:- 40 C 封装 / 箱体:WSON-8 封装:Reel
MAX17003ETJ+T 功能描述:电压模式 PWM 控制器 Quad Out Main Power Supply Controller RoHS:否 制造商:Texas Instruments 输出端数量:1 拓扑结构:Buck 输出电压:34 V 输出电流: 开关频率: 工作电源电压:4.5 V to 5.5 V 电源电流:600 uA 最大工作温度:+ 125 C 最小工作温度:- 40 C 封装 / 箱体:WSON-8 封装:Reel