- 您现在的位置：买卖IC网 > PDF目录13533 > MAX1705EEE+T (Maxim Integrated Products)IC REG BOOST ADJ 0.85A 16QSOP PDF资料下载
参数资料
| 型号： | MAX1705EEE+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 16/18页 |
| 文件大小： | 0K |
| 描述： | IC REG BOOST ADJ 0.85A 16QSOP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 类型： | 升压（升压） |
| 输出类型： | 可调式 |
| 输出数： | 1 |
| 输出电压： | 2.5 V ~ 5.5 V |
| 输入电压： | 0.7 V ~ 5.5 V |
| 频率 - 开关： | 260kHz ~ 340kHz |
| 电流 - 输出： | 850mA |
| 同步整流器： | 无 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-SSOP（0.154"，3.90mm 宽） |
| 包装： | 带卷 (TR) |
| 供应商设备封装： | 16-QSOP |
1- to 3-Cell, High-Current, Low-Noise,
Step-Up DC-DC Converters with Linear Regulator
reduces peak currents drawn from the input source
and reduces input switching noise. The input voltage
Table 4. Component Suppliers
source impedance determines the size required for the
input capacitor. When operating directly from one or
two NiCd cells placed close to the MAX1705/MAX1706,
use a 22μF, low-ESR input filter capacitor. When
operating from a power source placed farther away, or
from higher impedance batteries, consider using one or
two 100μF, 100m ? , low-ESR tantalum capacitors.
Low-ESR capacitors are recommended. Capacitor ESR
is a major contributor to output ripple—often more than
70%.
Ceramic, Sanyo OS-CON, and Panasonic SP/CB-series
capacitors offer the lowest ESR. Low-ESR tantalum
SUPPLIER
AVX
Coilcraft
Matsuo
Motorola
Sanyo
Sumida
PHONE
USA: 803-946-0690
800-282-4975
USA: 847- 639-6400
USA: 714-969-2491
USA: 602-303-5454
USA: 619-661-6835
Japan: 81-7-2070-6306
USA: 847-956-0666
Japan: 81-3-3607-5111
FAX
803-626-3123
847-639-1469
714-960-6492
602-994-6430
619-661-1055
81-7-2070-1174
847-956-0702
81-3-3607-5144
capacitors are second best and generally offer a good
trade-off between price and performance. Do not
exceed the ripple-current ratings of tantalum capaci-
tors. Avoid aluminum-electrolytic capacitors, since their
ESR is too high.
Adding Bypass Capacitors
Several ceramic bypass capacitors are required for
proper operation of the MAX1705/MAX1706. Bypass
REF with a 0.33μF capacitor to GND. Connect a 0.1μF
ceramic capacitor from OUT to GND and a 0.33μF
ceramic capacitor from POUT to PGND. Place a 22μF,
low-ESR capacitor and an optional 0.33μF ceramic
capacitor from the linear-regulator output LDO to GND.
An optional 22pF ceramic capacitor can be added to
the linear-regulator feedback network to reduce noise
(C2, Figure 2). Place each of these as close to their
respective pins as possible, within 0.2in. (5mm) of the
DC-DC converter IC. High-value, low-voltage, surface-
mount ceramic capacitors are now readily available in
small packages; see Table 4 for suggested suppliers.
Designing a PC Board
High switching frequencies and large peak currents
make PC board layout an important part of design.
Poor design can cause excessive EMI and ground-
bounce, both of which can cause instability or
regulation errors by corrupting voltage- and current-
feedback signals. It is highly recommended that the PC
board example of the MAX1705 evaluation kit (EV kit)
be followed.
Power components—such as the inductor, converter
IC, filter capacitors, and output diode —should be
placed as close together as possible, and their traces
should be kept short, direct, and wide. Place the LDO
output capacitor as close to the LDO pin as possible.
Make the connection between POUT and OUT very
short. Keep the extra copper on the board, and inte-
grate it into ground as a pseudo-ground plane.
On multilayer boards, do not connect the ground pins
of the power components using vias through an internal
ground plane. Instead, place them close together and
route them in a star-ground configuration using compo-
nent-side copper. Then connect the star ground to the
internal ground plane using vias.
Keep the voltage-feedback networks very close to the
MAX1705/MAX1706—within 0.2in. (5mm) of the FB and
FBLDO pins. Keep noisy traces, such as from the LX
pin, away from the reference and voltage-feedback net-
works, especially the LDO feedback, and separated
from them using grounded copper. Consult the
MAX1705/MAX1706 EV kit for a full PC board example.
Applications Information
Use in a Typical
Wireless Phone Application
The MAX1705/MAX1706 are ideal for use in digital cord-
less and PCS phones. The power amplifier (PA) is con-
nected directly to the step-up converter output for
maximum voltage swing (Figure 10). The internal linear
regulator is used for postregulation to generate low-
noise power for DSP, control, and RF circuitry. Typically,
RF phones spend most of their life in standby mode and
short periods in transmit/receive mode. During standby,
maximize battery life by setting CLK/SEL = GND and
TRACK = OUT; this places the IC in PFM and track
modes (for lowest quiescent power consumption). In
transmit/receive mode, set TRACK = GND and CLK/SEL
= OUT to increase the PA supply voltage and initiate
high-power, low-noise PWM operation. Table 5 lists the
typical available output current when operating with
one or more NiCd/NiMH cells or one Li-Ion cell.
16
______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| URS1E221MPD | CAP ALUM 220UF 25V 20% RADIAL |
| URS1C331MPD | CAP ALUM 330UF 16V 20% RADIAL |
| URS1A471MPD | CAP ALUM 470UF 10V 20% RADIAL |
| RBM36DCAH | CONN EDGECARD 72POS R/A .156 SLD |
| RBM36DCAD | CONN EDGECARD 72POS R/A .156 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX1705ESE+ | 制造商:Maxim Integrated Products 功能描述:1 TO 3-CELL HIGH-CURRENT LOW-NOIS - Rail/Tube |
| MAX1705EVKIT | 功能描述:直流/直流开关转换器 Evaluation Kit for the MAX1705 MAX1706 RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT |
| MAX17061AETI+ | 功能描述:LED照明驱动器 8-String White LED Driver w/SMBus RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| MAX17061AETI+T | 功能描述:LED照明驱动器 8-String White LED Driver w/SMBus RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| MAX17061AEVCMAXQU+ | 功能描述:LED 照明开发工具 Evaluation Kit/Evaluation system for MAX17061A RoHS:否 制造商:Fairchild Semiconductor 产品:Evaluation Kits 用于:FL7732 核心: 电源电压:120V 系列: 封装: |
发布紧急采购，3分钟左右您将得到回复。