- 您现在的位置：买卖IC网 > PDF目录1839 > MAX17067EUA+T (Maxim Integrated Products)IC REG BOOST ADJ 0.3A 8UMAX PDF资料下载
参数资料
| 型号： | MAX17067EUA+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 8/13页 |
| 文件大小： | 0K |
| 描述： | IC REG BOOST ADJ 0.3A 8UMAX |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 类型： | 升压（升压） |
| 输出类型： | 可调式 |
| 输出数： | 1 |
| 输出电压： | 1.25 V ~ 18 V |
| 输入电压： | 2.6 V ~ 4 V |
| PWM 型： | 电流模式 |
| 频率 - 开关： | 640kHz，1.2MHz |
| 电流 - 输出： | 300mA |
| 同步整流器： | 无 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽） |
| 包装： | 带卷 (TR) |
| 供应商设备封装： | 8-uMAX |
Low-Noise Step-Up DC-DC Converter
Soft-Start
The MAX17067 can be programmed for soft-start upon
power-up with an external capacitor. When the shut-
down pin is taken high, the soft-start capacitor (C SS ) is
immediately charged to 0.5V. Then the capacitor is
charged at a constant current of 4.5μA (typ). During
this time, the SS voltage directly controls the peak
inductor current, allowing 0A at V SS = 0.5V to the full
current limit at V SS = 1.5V. The maximum load current
is available after the soft-start cycle is completed.
When the shutdown pin is taken low, the soft-start
capacitor is discharged to ground.
Frequency Selection
The MAX17067’s frequency can be user selected to oper-
ate at either 640kHz or 1.2MHz. Connect FREQ to GND
for 640kHz operation. For a 1.2MHz switching frequen-
cy, connect FREQ to IN. This allows the use of small,
minimum-height external components while maintaining
low output noise. FREQ has an internal pulldown, allow-
ing the user the option of leaving FREQ unconnected
for 640kHz operation.
Shutdown
The MAX17067 is shut down to reduce the supply cur-
rent to 30μA when SHDN is low. In this mode, the inter-
nal reference, error amplifier, comparators, and biasing
circuitry turn off while the n-channel MOSFET is turned
off. The boost converter’s output is connected to IN by
the external inductor and catch diode.
Table 1. Component Selection
Thermal-Overload Protection
Thermal-overload protection prevents excessive power
dissipation from overheating the MAX17067. When the
junction temperature exceeds T J = +160 ° C, a thermal
sensor immediately activates the fault protection, which
shuts down the MAX17067, allowing the device to cool
down. Once the device cools down by approximately
20 ° C, it returns to normal operation.
Applications Information
Boost DC-DC converters using the MAX17067 can be
designed by performing simple calculations for a first
iteration. All designs should be prototyped and tested
prior to production. Table 1 provides a list of compo-
nents for a range of standard applications. Table 2 lists
component suppliers.
External component value choice is primarily dictated
by the output voltage and the maximum load current,
as well as maximum and minimum input voltages.
Begin by selecting an inductor value. Once L is known,
choose the diode and capacitors.
Inductor Selection
The minimum inductance value, peak current rating, and
series resistance are factors to consider when selecting
the inductor. These factors influence the converter’s effi-
ciency, maximum output load capability, transient-
response time, and output voltage ripple. Physical size
and cost are also important factors to be considered.
VIN (V)
3.3
3.3
VOUT (V)
9
9
fOSC (Hz)
1.2M
640k
L (μH)
3.3
4.7
COUT (μF)
10
10
RCOMP (k )
121
82
CCOMP (pF)
620
1000
CCOMP2
(pF)
10
10
IOUT(MAX)
(mA)
250
250
Table 2. Component Suppliers
SUPPLIER
PHONE
FAX
SUPPLIER
PHONE
FAX
Inductors
Diodes
Coilcraft
Coiltronics
Sumida USA
TOKO
Capacitors
AVX
KEMET
847-639-6400
561-241-7876
847-956-0666
847-297-0070
803-946-0690
408-986-0424
847-639-1469
561-241-9339
847-956-0702
847-699-1194
803-626-3123
408-986-1442
Central
Semiconductor
International
Rectifier
Motorola
Nihon
Zetex
516-435-1110
310-322-3331
602-303-5454
847-843-7500
516-543-7100
516-435-1824
310-322-3332
602-994-6430
847-843-2798
516-864-7630
SANYO
Taiyo Yuden
619-661-6835
408-573-4150
619-661-1055
408-573-4159
8
_______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| MAX1706EEE+T | IC REG BOOST ADJ 0.4A 16QSOP |
| MAX17075ETG+T | IC DC-DC CONV W/CHRG PUMP 24TQFN |
| MAX17080GTL+T | IC CONTROLLER AMD SVI 40-TQFN |
| MAX17083ETG+T | IC REG BUCK ADJ 5A 24TQFN |
| MAX17085GTL+ | IC CHARGER/CTLR/LDO REG 40-TQFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX17068AAX/V+ | 制造商:Maxim Integrated Products 功能描述:10-CHANNEL HIGH-VOLTAGE SENSOR SMART DATA-ACQUISITION INTERF - Rail/Tube |
| MAX17069AAX+ | 制造商:Maxim Integrated Products 功能描述:10-CHANNEL HIGH-VOLTAGE SENSOR SMART DATA-ACQUISITION INTERF - Rail/Tube |
| MAX1706EEE | 功能描述:直流/直流开关转换器 1-3 Cell Step-Up w/Linear Regulator RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT |
| MAX1706EEE+ | 功能描述:直流/直流开关转换器 1-3 Cell Step-Up w/Linear Regulator RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT |
| MAX1706EEE+T | 功能描述:直流/直流开关转换器 1-3 Cell Step-Up w/Linear Regulator RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT |
发布紧急采购，3分钟左右您将得到回复。