- 您现在的位置：买卖IC网 > PDF目录16210 > MAX17535ETG+ (Maxim Integrated Products)IC SMBUS BATT CHRGR HF 24TQFN PDF资料下载
参数资料
| 型号： | MAX17535ETG+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 20/28页 |
| 文件大小： | 0K |
| 描述： | IC SMBUS BATT CHRGR HF 24TQFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 75 |
| 功能： | 充电管理 |
| 电池化学： | 锂离子（锂离子），多化学 |
| 电源电压： | 8 V ~ 26 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 24-WFQFN 裸露焊盘 |
| 供应商设备封装： | 24-TQFN-EP（4x4） |
| 包装： | 管件 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页当前第20页第21页第22页第23页第24页第25页第26页第27页第28页
High-Frequency,
Low-Cost SMBus Chargers
Table 5. ChargeCurrent() (0x14) (10m I Sense Resistor, RS2) (continued)
BIT
9
10
11
12
13
14
15
BIT NAME
Charge Current, DACI 2
Charge Current, DACI 3
Charge Current, DACI 4
Charge Current, DACI 5
—
—
—
DESCRIPTION
0 = Adds 0mA of charger current compliance.
1 = Adds 512mA of charger current compliance.
0 = Adds 0mA of charger current compliance.
1 = Adds 1024mA of charger current compliance.
0 = Adds 0mA of charger current compliance.
1 = Adds 2048mA of charger current compliance.
0 = Adds 0mA of charger current compliance.
1 = Adds 4096mA of charger current compliance, 8064mA max
Not used. Normally a 8192mA weight.
Not used. Normally a 16386mA weight.
Not used. Normally a 32772mA weight.
Setting Input-Current Limit
System current normally fluctuates as portions of the
system are powered up or put to sleep. By using the input-
current-limit circuit, the output-current requirement of the
AC wall adapter can be lowered, reducing system cost.
The total input current is the sum of the system supply
current, the charge current flowing into the battery, and
the current required by the charger. When the input
current exceeds the input current limit set with the
InputCurrent() command, the MAX17435/MAX17535
reduce the charge current to provide priority to system
load current. As the system supply current increases,
the charge current is reduced as needed to maintain
the total input current at the input current limit. The
MAX17435/MAX17535 decrease the charge current to
zero, if necessary, to reduce the input current to the input
current limit. Thereafter, if the system current continues
to increase, there is nothing the MAX17435/MAX17535
can do to maintain the input current at the input current
limit. If the system current continues to increase so that
the input current exceeds the ACOCP threshold (130%
of InputCurrent() setting) for more than 16ms (typ), the
MAX17435/MAX17535 drive PDSL low, which turns off the
adapter selector FETs and disconnects the adapter from
the system. After waiting 0.6s, the MAX17435/MAX17535
re-enable PDSL. If the ACOCP fault occurs again, the
MAX17435/MAX17535 drive PDSL low again after the
16ms (typ) delay. This cycle is repeated a maximum
of three times, after which the MAX17435/MAX17535
are latched off, and need to be reset by removing and
reinserting the adapter.
The total input current can be estimated as follows:
I INPUT = I SYSTEM + I CHARGER +
[(I CHARGE × V BATTERY ) (V IN × η )]
where E is the efficiency of the DC-DC converter (typically
85% to 95%).
To set the input current limit, use the SMBus to write a
16-bit InputCurrent() using the data format listed in Table
6. The InputCurrent() command uses the write-word
and read-word protocols (see Figure 3). The command
code for InputCurrent() is 0x3F (0b00111111). When RS1
= 10m I , the MAX17435/MAX17535 provide an input
current-limit range of 256mA to 11.004A with 256mA
resolution. If a resistor RS other than 10m I is used, the
input current limit is scaled by a factor of 10m I /RS1.
InputCurrent() settings from 1mA to 256mA result in a
current limit of 256mA. Upon reset, the input current limit
is 256mA.
Setting Relearn Voltage
To set the relearn voltage, use the SMBus to write a 16-bit
RelearnVoltage() command using the data format listed in
Table 7. The RelearnVoltage() command uses the
write-word and read-word protocols (see Figure 3).
The command code for RelearnVoltage() is 0x3D
(0b00111101). The MAX17435/MAX17535 provide a
charge-voltage range of 4.095V to 19.200V with 16mV
resolution. When the relearn function is enabled by setting
bit 0 to 1, the MAX17435/MAX17535 drive PDSL low,
turning off the adapter selector FETs and turning on the
battery selector FET. This allows the battery to discharge
by powering the system while the adapter is still present.
The battery voltage is monitored until the battery voltage
reaches the relearn voltage corresponding to a known low
state of charge. The relearn bit 0 is set to zero, and PDSL
is re-enabled.
20
_____________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| CW252016-15NG | INDUCTOR 15NH 1008 SMD |
| GCM22DRMD | CONN EDGECARD 44POS .156 WW |
| ABM10DSUN | CONN EDGECARD 20POS .156 DIP SLD |
| MAX8765ETI+ | IC CHARGER BATTERY 28-TQFN |
| CW252016-10NG | INDUCTOR 10NH 1008 SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX17535ETG+ | 功能描述:电池管理 High Frequency SMBus Charger RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| MAX17535ETG+T | 功能描述:电池管理 High Frequency SMBus Charger RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| MAX17535EVKIT+ | 功能描述:电池管理 EVKIT RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| MAX17552ATB+T | 制造商:Maxim Integrated Products 功能描述: |
| MAX1756AAUT | 制造商:Maxim Integrated Products 功能描述:- Cut Tape Product |
发布紧急采购，3分钟左右您将得到回复。