- 您现在的位置：买卖IC网 > PDF目录16266 > MAX19713EVCMODU+ (Maxim Integrated Products)EVAL MODULE FOR MAX19713 PDF资料下载
参数资料
| 型号： | MAX19713EVCMODU+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 10/21页 |
| 文件大小： | 0K |
| 描述： | EVAL MODULE FOR MAX19713 |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 1 |
| 主要目的： | 接口，模拟前端（AFE） |
| 嵌入式： | 否 |
| 已用 IC / 零件： | MAX19713 |
| 主要属性： | 双路 45MSPS 10 位 Rx ADC 和 Tx DAC |
| 次要属性： | 图形用户接口，SPI? 和 USB 接口 |
| 已供物品： | 2 板，CD |
MAX19710–MAX19713 Evaluation
Kits/Evaluation Systems
Configure the on-board buffers for a positive (noninverting)
gain by performing the following steps:
1) Cut open the trace at locations R31, R33, and R35.
2) Select a value of 10k Ω for resistors R32, R34, and
R36.
3) Calculate resistors R31, R33, and R35 using the
equations below.
4) Install R31, R33, and R35 in their respective locations:
Disconnect the buffers from the AFEs by cutting the
trace at locations R28, R29, and R30. Connect the low-
speed DAC loads to the DAC1, DAC2, and DAC3 pads
on the EV kit. If the load capacitance is between 5pF
and 15pF, cut the trace and install 10k Ω resistors at
locations R25, R26, and R27. Resistors are not required
if the load is less than 5pF.
Using an Alternative SPI Interface
The EV kits provide pads and jumpers that allow an
alternative SPI interface to be used. Connect the inter-
R 31 = R 32 x ?
? 1 ?
? BDAC 1
? DAC 1
?
?
face to the CS , SCLK, DIN, DOUT, and OGND pads.
Ensure that the SPI voltages are compatible with all of
the AFE ’s working voltages. Refer to the individual
MAX19710, MAX19711, MAX19712, and MAX19713
= R
R 33 34 x ?
?
? 1 ?
= R
R 35 36 x ?
?
? 1 ?
? BDAC 2
DAC 2
? BDAC 3
DAC 3
?
?
?
?
data sheets for suitable SPI interface voltages. Remove
the shunts from jumper JU1. See Table 4 for jumper
configurations.
Table 4. Alternative SPI Interface (JU1)
SHUNT POSITION DESCRIPTION
1-2*
where:
BDAC _
DAC _
= Desired noninverting gain of buffer
3-4*
5-6*
7-8*
Normal Operation.
Four shunts are installed across
pins 1-2, 3-4, 5-6, and 7-8.
Alternative SPI Interface.
R 32 = R 34 = R 36 = 10k Ω
Not installed
No shunts are installed on JU1, connect
the SPI signals to the CS , SCLK, DIN,
Driving Unbuffered Loads
The low-speed buffers (U6) on the EV kits are optional and,
if desired, can be disconnected from the DAC outputs of
the AFEs.
*Default configuration.
DOUT, and OGND pads.
10
______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| EBM22DTAT | CONN EDGECARD 44POS R/A .156 SLD |
| ESM10DTAN | CONN EDGECARD 20POS R/A .156 SLD |
| EMM10DTAN | CONN EDGECARD 20POS R/A .156 SLD |
| EBM31DTAN | CONN EDGECARD 62POS R/A .156 SLD |
| PCX1V560MCL1GS | CAP ALUM 56UF 35V 20% SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX19713EVCMODU+ | 功能描述:数据转换 IC 开发工具 MAX19710/13 Eval Kit RoHS:否 制造商:Texas Instruments 产品:Demonstration Kits 类型:ADC 工具用于评估:ADS130E08 接口类型:SPI 工作电源电压:- 6 V to + 6 V |
| MAX19713EVKIT | 功能描述:数据转换 IC 开发工具 RoHS:否 制造商:Texas Instruments 产品:Demonstration Kits 类型:ADC 工具用于评估:ADS130E08 接口类型:SPI 工作电源电压:- 6 V to + 6 V |
| MAX19713EVKIT+ | 功能描述:数据转换 IC 开发工具 MAX19710/13 Eval Kit RoHS:否 制造商:Texas Instruments 产品:Demonstration Kits 类型:ADC 工具用于评估:ADS130E08 接口类型:SPI 工作电源电压:- 6 V to + 6 V |
| MAX1971EEE | 功能描述:直流/直流开关调节器 RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
| MAX1971EEE+ | 功能描述:直流/直流开关调节器 Dual 180 Out 1.4MHz 750mA Step-Down RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
发布紧急采购，3分钟左右您将得到回复。