- 您现在的位置：买卖IC网 > PDF目录16266 > MAX19713EVCMODU+ (Maxim Integrated Products)EVAL MODULE FOR MAX19713 PDF资料下载
参数资料
| 型号： | MAX19713EVCMODU+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 5/21页 |
| 文件大小： | 0K |
| 描述： | EVAL MODULE FOR MAX19713 |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 1 |
| 主要目的： | 接口，模拟前端（AFE） |
| 嵌入式： | 否 |
| 已用 IC / 零件： | MAX19713 |
| 主要属性： | 双路 45MSPS 10 位 Rx ADC 和 Tx DAC |
| 次要属性： | 图形用户接口，SPI? 和 USB 接口 |
| 已供物品： | 2 板，CD |
MAX19710–MAX19713 Evaluation
Kits/Evaluation Systems
Tx DAC Setup
34) Connect the clock signal generator to the input of
the clock bandpass filter.
35) Connect the output of the clock bandpass filter to
the EV kit SMA connector labeled CLOCK.
36) Connect the output of the clock signal generator to
the data generator synchronization input.
37) Connect the first spectrum analyzer to the EV kit
SMA connector labeled QD (Q channel).
38) Connect the second spectrum analyzer to the EV kit
SMA connector labeled ID (I channel).
39) Connect the data generator to J3. Use the bit labels
(DA_) located next to header J3 for proper bit align-
ment, or see the Digital Data Bit Locations section
for header connections.
40) Turn on the -5V power supply.
41) Turn on all remaining power supplies.
42) Enable the signal generator.
43) Set the clock signal generator to output a 45MHz
signal. The amplitude of the generator should be
sufficient to produce a +16dBm signal at the SMA
input of the EV kit. Insertion losses, due to the
series-connected filter (step 34) and the intercon-
necting cables, decrease the amount of power
seen at the EV kit input. Account for these losses
when setting the signal generator amplitude.
44) Load the desired test pattern into the data generator.
Detailed Description of Software
User-Interface Panel
The user interface (Figure 1) is easy to operate; use the
mouse, or a combination of the Tab and arrow keys to
manipulate the software. Each of the buttons corre-
spond to bits in the command and configuration bytes
of the Maxim IC. By selecting them, the correct SPI
write operation is generated to update the internal reg-
isters of the MAX19710–MAX19713.
The software divides EV kit functions into logical
blocks. The Interface box indicates the Device , the
Register Address Sent , the Data Sent/Received for
the last write operation, and the SPI Clock Frequency .
This data is used to confirm proper device operation.
Adjust the SPI Clock Frequency through the combo
box. Use the Device combo box to select the proper
AFE and features.
The controls for the Tx DAC , Auxiliary DACs , and
Auxiliary ADC are accessed through tab sheets.
Device Control is accessed at the right-hand side of
the main window. Return the EV kit to its power-on-reset
state by selecting the POR Reset button.
The MAX19710 –MAX19713 EV kit software features
additional functions to simplify operation. Automatic
Diagnostics probes the command module board to
make sure a connection exists between the PC and the
command module.
Data clocked on the rising edge of the clock is trans-
mitted to the Q channel. Data clocked on the falling
edge of the clock is transmitted to the I channel.
45) Start the MAX19710–MAX19713 program by open-
ing its icon in the Start menu.
46) Normal device operation can be verified by the
Status: Interface Board Operational text in the
Interface box.
47) Select the Maxim device that you are using in the
Device combo box.
48) Click the POR Reset button on the EV kit software
GUI.
49) Enable the data generator.
50) Enable the spectrum analyzers.
51) Analyze the data on the EV kit outputs (QD and ID)
with the spectrum analyzers.
Figure 1. MAX19713 EV Kit Software Main Window
_______________________________________________________________________________________
5
相关PDF资料 |
PDF描述 |
|---|---|
| EBM22DTAT | CONN EDGECARD 44POS R/A .156 SLD |
| ESM10DTAN | CONN EDGECARD 20POS R/A .156 SLD |
| EMM10DTAN | CONN EDGECARD 20POS R/A .156 SLD |
| EBM31DTAN | CONN EDGECARD 62POS R/A .156 SLD |
| PCX1V560MCL1GS | CAP ALUM 56UF 35V 20% SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX19713EVCMODU+ | 功能描述:数据转换 IC 开发工具 MAX19710/13 Eval Kit RoHS:否 制造商:Texas Instruments 产品:Demonstration Kits 类型:ADC 工具用于评估:ADS130E08 接口类型:SPI 工作电源电压:- 6 V to + 6 V |
| MAX19713EVKIT | 功能描述:数据转换 IC 开发工具 RoHS:否 制造商:Texas Instruments 产品:Demonstration Kits 类型:ADC 工具用于评估:ADS130E08 接口类型:SPI 工作电源电压:- 6 V to + 6 V |
| MAX19713EVKIT+ | 功能描述:数据转换 IC 开发工具 MAX19710/13 Eval Kit RoHS:否 制造商:Texas Instruments 产品:Demonstration Kits 类型:ADC 工具用于评估:ADS130E08 接口类型:SPI 工作电源电压:- 6 V to + 6 V |
| MAX1971EEE | 功能描述:直流/直流开关调节器 RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
| MAX1971EEE+ | 功能描述:直流/直流开关调节器 Dual 180 Out 1.4MHz 750mA Step-Down RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
发布紧急采购，3分钟左右您将得到回复。