- 您现在的位置：买卖IC网 > PDF目录2157 > MAX2036CCQ+ (Maxim Integrated Products)IC VGA W/OCTAL MIXER 8CH 100TQFP PDF资料下载
参数资料
| 型号： | MAX2036CCQ+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 6/25页 |
| 文件大小： | 0K |
| 描述： | IC VGA W/OCTAL MIXER 8CH 100TQFP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 90 |
| 放大器类型： | 可变增益 |
| 电路数： | 8 |
| 输出类型： | 差分 |
| -3db带宽： | 2MHz |
| 电流 - 电源： | 245mA |
| 电流 - 输出 / 通道： | 3.75mA |
| 电压 - 电源，单路/双路(±)： | 4.75 V ~ 5.25 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 100-TQFP 裸露焊盘 |
| 供应商设备封装： | 100-TQFP-EP（14x14） |
| 包装： | 托盘 |
MAX2036
Ultrasound VGA Integrated
with CW Octal Mixer
14
______________________________________________________________________________________
Detailed Description
The MAX2036 is an 8-channel VGA integrated with a
programmable octal quadrature mixer array designed
for ultrasound imaging and Doppler applications. The
device is optimized for efficient power consumption,
high dynamic range, and exceptionally low-noise
performance. The VGA path features differential inputs,
analog variable gain control, differential outputs for
direct ADC drive, and a selectable output voltage
clamp to avoid ADC overdrive. The integrated octal
quadrature mixer array includes serial-programmable
LO phase generators for CWD beamforming applica-
tions. The LO phase dividers can be programmed for 4,
8, or 16 quadrature phases. Lowpass filters are inte-
grated at the input paths of each CW mixer. The out-
puts for the mixers are summed into single I/Q
differential current outputs.
The MAX2036 also integrates an octal quadrature mixer
array and programmable LO phase generators for a
complete continuous wave (CW) Doppler beamforming
solution. The LO phase selection for each channel is
programmed using a digital serial interface and a sin-
gle high-frequency clock, or the LOs for each complex
mixer pair can be directly driven using separate 4 x LO
clocks. The serial interface is designed to allow multiple
devices to be easily daisy chained in order to minimize
program interface wiring. The LO phase dividers can
be programmed to allow 4, 8, or 16 quadrature phases.
The input path of each CW mixer consists of a selec-
table lowpass filter for optimal CWD noise performance.
The outputs of the mixers are summed into single I and
Q differential current outputs. The mixers and LO gen-
erators are designed to have exceptionally low noise
performance of -155dBc/Hz at 1kHz offset from a
1.25MHz carrier, measured with 900mVP-P differential
clutter signal.
Variable Gain Amplifier (VGA)
The MAX2036’s VGAs are optimized for high linearity,
high dynamic range, and low output-noise perfor-
mance, making this component ideal for ultrasound
imaging applications. The VGA paths also exhibit a
channel-to-channel crosstalk of -80dB at 10MHz and an
absolute gain error of less than ±0.5dB for minimal
channel-to-channel focusing error in an ultrasound sys-
tem. Each VGA path includes circuitry for adjusting
analog gain, an output buffer with differential output
ports (VGOUT_+, VGOUT_-) for driving ADCs, and dif-
ferential input ports (VGIN_+, VGIN_-), which are ideal
for directly interfacing to the MAX2034 quad LNA. See
the
High-Level Wave Mixer and Programmable Beam-
Former Functional Diagram for details.
The VGA has an adjustable gain range from -10.5dB to
+39.5dB, achieving a total dynamic range of 50dB
(typ). The VGA gain can be adjusted using the differen-
tial gain-control inputs VG_CTL+ and VG_CTL-. Set the
differential gain-control input voltage at +2V for mini-
mum gain and -2V for maximum gain. The differential
analog control common-mode voltage is 3V (typ).
GND
VCC
+5V
VREF
VG_CTL+
VG_CTL-
VG_CLAMP_MODE
VGOUT1+
VGOUT1-
VGOUT8+
VGOUT8-
CW_IOUT+
CW_IOUT-
VGIN1+
VGIN1-
VGIN8+
VGIN8-
LOW_PWR
PD
CW_VG
CW_FILTER
VGA
50
50
+5V (LOW NOISE)
VGA
I&Q
50
50
CWIN1+
CWIN1-
CW_QOUT+
CW_QOUT-
I&Q
CWIN8+
CWIN8-
MAX2036
High-Level Wave Mixer and
Programmable Beamformer
Functional Diagram
相关PDF资料 |
PDF描述 |
|---|---|
| MAX2470EUT+T | IC AMP VCO BUFFER DIFF SOT23-6 |
| MAX2472EUT+T | IC VCO BUFFER AMP SOT23-6 |
| MAX34406HETG+T | IC AMP CURR SENSE QUAD 24TQFN |
| MAX3798ETJ+T | IC LIMITING AMP/VCSEL DVR 32TQFN |
| MAX400CPA+ | IC OPAMP ULTRA LOW OFFSET 8-DIP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX2036CCQ+ | 功能描述:仪表放大器 Ultrasound Variable Gain Amplifier RoHS:否 制造商:Texas Instruments 通道数量: 输入补偿电压:150 V 可用增益调整: 最大输入电阻:10 kOhms 共模抑制比（最小值）:88 dB 工作电源电压:2.7 V to 36 V 电源电流:200 uA 最大工作温度:+ 125 C 最小工作温度:- 40 C 封装 / 箱体:MSOP-8 封装:Bulk |
| MAX2036CCQ+D | 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述: |
| MAX2036CCQ+T | 功能描述:仪表放大器 Ultrasound Variable Gain Amplifier RoHS:否 制造商:Texas Instruments 通道数量: 输入补偿电压:150 V 可用增益调整: 最大输入电阻:10 kOhms 共模抑制比（最小值）:88 dB 工作电源电压:2.7 V to 36 V 电源电流:200 uA 最大工作温度:+ 125 C 最小工作温度:- 40 C 封装 / 箱体:MSOP-8 封装:Bulk |
| MAX2036CCQ+TD | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Ultrasound VGA Integrated with CW Octal Mixer |
| MAX2036EVKIT | 制造商:Maxim Integrated Products 功能描述:ULTRASOUND VARIABLE-GAIN AMPLIFIER WITH CWD (10B COMPATIBLE - Boxed Product (Development Kits) |
发布紧急采购，3分钟左右您将得到回复。