- 您现在的位置：买卖IC网 > PDF目录18729 > MAX2039ETP+TD (Maxim Integrated)IC MIXER UP/DWN HI LIN 20-TQFN PDF资料下载
参数资料
| 型号： | MAX2039ETP+TD |
| 厂商： | Maxim Integrated |
| 文件页数： | 12/16页 |
| 文件大小： | 0K |
| 描述： | IC MIXER UP/DWN HI LIN 20-TQFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 系列： | MAX2039 |
| RF 型： | 手机，CDMA2000，EDGE，GSM，W-CDMA |
| 频率： | 1.7GHz ~ 2.2GHz |
| 混频器数目： | 1 |
| 噪音数据： | 7.3dB |
| 次要属性： | 升/降频器 |
| 电流 - 电源： | 135mA |
| 电源电压： | 4.75 V ~ 5.25 V |
| 包装： | 带卷 (TR) |
| 封装/外壳： | 20-WQFN 裸露焊盘 |
| 供应商设备封装： | 20-TQFN-EP（5x5） |
High-Linearity, 1700MHz to 2200MHz Upconversion/
Downconversion Mixer with LO Buffer/Switch
Pin Description
PIN
1, 6, 8, 14
2
3
4, 5, 10, 12,
13, 16, 17,
20
7
9
11
15
18, 19
EP
NAME
V CC
RF
TAP
GND
LOBIAS
LOSEL
LO1
LO2
IF-, IF+
GND
FUNCTION
Power-Supply Connection. Bypass each V CC pin to GND with capacitors as shown in the Typical
Application Circuit .
Single-Ended 50 Ω RF Input/Output. This port is internally matched and DC shorted to GND through a
balun.
Center Tap of the Internal RF Balun. Bypass to GND with capacitors close to the IC, as shown in the
Typical Application Circuit .
Ground
Bias Resistor for Internal LO Buffer. Connect a 549 Ω 1% resistor from LOBIAS to the power supply.
Local Oscillator Select. Logic control input for selecting LO1 or LO2.
Local Oscillator Input 1. Drive LOSEL low to select LO1.
Local Oscillator Input 2. Drive LOSEL high to select LO2.
Differential IF Input/Outputs
Exposed Ground Paddle. Solder the exposed paddle to the ground plane using multiple vias.
Detailed Description
The MAX2039 can operate either as a downconverter
or an upconverter mixer that provides 7.1dB of conver-
sion loss with a typical 7.3dB noise figure. IIP3 is
+33.5dBm for upconversion and +34.5dBm for down-
conversion. The integrated baluns and matching cir-
cuitry allow for 50 Ω single-ended interfaces to the RF
port and two LO ports. The RF port can be used as an
input for downconversion or an output for upconver-
sion. A single-pole, double-throw (SPDT) switch pro-
vides 50ns switching time between the two LO inputs
with 45dB of LO-to-LO isolation. Furthermore, the inte-
grated LO buffer provides a high drive level to the
mixer core, reducing the LO drive required at the
MAX2039’s inputs to a range of -3dBm to +3dBm. The
IF port incorporates a differential output for downcon-
version, which is ideal for providing enhanced IIP2 per-
formance. For upconversion, the IF port is a differential
input.
Specifications are guaranteed over broad frequency
ranges to allow for use in UMTS, cdma2000, and
2G/2.5G/3G DCS1800, and PCS1900 base stations.
The MAX2039 is specified to operate over an RF fre-
quency range of 1700MHz to 2200MHz, an LO frequen-
cy range of 1500MHz to 2000MHz, and an IF frequency
range of DC to 350MHz. Operation beyond these
ranges is possible; see the Typical Operating
Characteristics for additional details.
This device can operate in high-side LO injection appli-
cations with an extended LO range, but performance
degrades as f LO continues to increase. See the Typical
Operating Characteristics for measurements taken with
f LO up to 2200MHz. For a device with better high-side
LO injection performance, contact the factory.
RF Port and Balun
For using the MAX2039 as a downconverter, the RF input
is internally matched to 50 Ω , requiring no external match-
ing components. A DC-blocking capacitor is required
since the input is internally DC shorted to ground through
the on-chip balun. The RF return loss is typically 18dB
over the entire 1700MHz to 2200MHz RF frequency
range. For upconverter operation, the RF port is a single-
ended output similarly matched to 50 Ω .
LO Inputs, Buffer, and Balun
The MAX2039 can be used for either high-side or low-
side injection applications with a 1500MHz to 2000MHz
LO frequency range. For a device with a 1900MHz to
2400MHz LO frequency range, contact the factory. As
an added feature, the MAX2039 includes an internal LO
SPDT switch that can be used for frequency-hopping
applications. The switch selects one of the two single-
ended LO ports, allowing the external oscillator to settle
on a particular frequency before it is switched in. LO
switching time is typically less than 50ns, which is more
than adequate for virtually all GSM applications.
12
______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| MAX2042AETP+ | IC UP/DWN CONVERSION MIXR 20TQFN |
| 636L3I044M00000 | OSCILLATOR 44.0 MHZ 3.3V SMD |
| MAX19998ETP+T | IC MIXER DOWNCONVERSION 20TQFN |
| 636L3I033M33300 | OSCILLATOR 33.333 MHZ 3.3V SMD |
| MAX19996AETP+T | IC DOWNCONVERTER SGL 20-TQFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX2039EVKIT | 功能描述:射频开发工具 RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V |
| MAX203CPP | 功能描述:RS-232接口集成电路 5V RS-232 Tcvr w/0.1uF External Cap RoHS:否 制造商:Exar 数据速率:52 Mbps 工作电源电压:5 V 电源电流:300 mA 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:LQFP-100 封装: |
| MAX203CPP+ | 制造商:Maxim Integrated Products 功能描述:Dual Transmitter/Receiver RS-232 20-Pin PDIP N Bulk |
| MAX203CPP+G36 | 功能描述:RS-232接口集成电路 5V RS-232 Tcvr w/0.1uF External Cap RoHS:否 制造商:Exar 数据速率:52 Mbps 工作电源电压:5 V 电源电流:300 mA 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:LQFP-100 封装: |
| MAX203CWP | 功能描述:RS-232接口集成电路 RoHS:否 制造商:Exar 数据速率:52 Mbps 工作电源电压:5 V 电源电流:300 mA 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:LQFP-100 封装: |
发布紧急采购，3分钟左右您将得到回复。