- 您现在的位置：买卖IC网 > Datasheet目录472 > MAX2062ETM+ (Maxim Integrated)IC VGA ANALOG/DIGITAL 48TQFN-EP Datasheet资料下载
参数资料
| 型号： | MAX2062ETM+ |
| 厂商： | Maxim Integrated |
| 文件页数： | 21/24页 |
| 文件大小： | 0K |
| 描述： | IC VGA ANALOG/DIGITAL 48TQFN-EP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 1 |
| 频率： | 50MHz ~ 1GHz |
| P1dB： | 18.8dB |
| 增益： | 16.5dB |
| 噪音数据： | 9dB |
| RF 型： | 通用 |
| 电源电压： | 3.135 V ~ 3.465 V，4.75 V ~ 5.25 V |
| 电流 - 电源： | 148mA |
| 测试频率： | 900MHz |
| 封装/外壳： | 48-WFQFN 裸露焊盘 |
| 包装： | 管件 |
Dual 50MHz to 1000MHz High-Linearity,
Serial/Parallel-Controlled Analog/Digital VGA
Attenuator and DAC Operation
The two analog attenuators are controlled by an external
control voltage applied at A_VCTL_1 and A_VCTL_2
(pins 39 and 22) or by the on-chip 8-bit DACs, while
the digital attenuators are controlled through the SPI-
compatible interface or through two independent,
parallel 5-bit buses. The DAC enable/disable logic-input
pin (AA_SP) and digital attenuator SPI/parallel control
selection logic-input pin (DA_SP) determine how the
attenuators are controlled.
Digital Attenuator Settings
Using the Parallel Control Bus
To capitalize on its fast 25ns switching capability, the
device offers a supplemental 5-bit parallel control inter-
face. The digital logic attenuator control pins (D0_–D4_)
enable the attenuator stages (see Tables 3 and 4).
Direct access to these 5-bit buses enables the user to
avoid any programming delays associated with the SPI
interface. One of the limitations of any SPI bus is the
speed at which commands can be clocked into each
peripheral device. By offering direct access to the 5-bit
parallel interface, the user can quickly shift between
digital attenuator states needed for critical fast-attack
automatic gain control (AGC) applications.
Note that when the digital attenuators are controlled by
the SPI bus, the control voltages of each digital attenua-
tor appears on the five parallel control pins (pins 14–17
and 19 for digital attenuator 2, pins 42 and 44–47 for
digital attenuator 1). When the digital attenuators are
in SPI mode, the parallel control pins must be left
unconnected.
Rapid-Fire Preprogrammed
Attenuation States
The device has an added feature that provides rapid-
fire gain selection among four preprogrammed attenu-
ation steps. As with the supplemental 5-bit buses
previously mentioned, this rapid-fire gain selection allows
the user to quickly access any one of four customized
digital attenuation states without incurring the delays
associated with reprogramming the device through the
SPI bus.
The switching speed is comparable to that achieved
using the supplemental 5-bit parallel buses. However, by
employing this specific feature, the digital attenuator I/O
is further reduced by a factor of either 5 or 2.5 (5 control
bits vs. 1 or 2, respectively), depending on the number
of states desired.
The user can employ the STA_A_1 and STA_B_1
(STA_A_2 and STA_B_2 for digital attenuator 2) logic-
input pins to apply each step as required (see Tables
5 and 6). Toggling just the STA_A_1 pin (1 control bit)
yields two preprogrammed attenuation states; toggling
both the STA_A_1 and STA_B_1 pins together (2 control
bits) yields four preprogrammed attenuation states.
Table 4. Digital Attenuator Settings (Parallel Control , DA_SP = 0)
INPUT
D0
D1
D2
D3
D4
LOGIC = 0 (OR GROUND)
Disable 1dB attenuator
Disable 2dB attenuator
Disable 4dB attenuator
Disable 8dB attenuator
Disable 16dB attenuator
LOGIC = 1
Enable 1dB attenuator
Enable 2dB attenuator
Enable 4dB attenuator
Enable 8dB attenuator
Enable 16dB attenuator
Table 5. Programmed Attenuation State
Settings for Attenuator 1 (DA_SP = 1)
Table 6. Programmed Attenuation State
Settings for Attenuator 2 (DA_SP = 1)
STA_A_1
0
1
0
1
STA_B_1
0
0
1
1
SETTING FOR DIGITAL
ATTENUATOR 1*
Preprogrammed attenuation state 1
Preprogrammed attenuation state 2
Preprogrammed attenuation state 3
Preprogrammed attenuation state 4
STA_A_2
0
1
0
1
STA_B_2
0
0
1
1
SETTING FOR DIGITAL
ATTENUATOR 2**
Preprogrammed attenuation state 1
Preprogrammed attenuation state 2
Preprogrammed attenuation state 3
Preprogrammed attenuation state 4
* Defined by SPI programming bits D8:D27 (see Table 3 for
details).
** Defined by SPI programming bits D36:D55 (see Table 3 for
details).
______________________________________________________________________________________
21
相关PDF资料 |
PDF描述 |
|---|---|
| MAX2063ETM+ | IC VGA PROG DIGITAL 48TQFN-EP |
| MAX2064ETM+ | IC VGA PROG ANALOG 48TQFN-EP |
| MAX2065EVKIT | KIT EVALUATION FOR MAX2065 |
| MAX2066EVKIT | KIT EVALUATION FOR MAX2066 |
| MAX2067EVKIT | KIT EVALUATION FOR MAX2067 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX2062ETM+ | 功能描述:射频放大器 Dual 50MHz - 1GHz Ser/Parallel Analog RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel |
| MAX2062ETM+T | 功能描述:射频放大器 MAX2062 Eval Kit RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel |
| MAX2062EVKIT# | 功能描述:放大器 IC 开发工具 MAX2062 Eval Kit RoHS:否 制造商:International Rectifier 产品:Demonstration Boards 类型:Power Amplifiers 工具用于评估:IR4302 工作电源电压:13 V to 23 V |
| MAX2063 | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Dual 50MHz to 1000MHz High-Linearity, Serial/Parallel-Controlled Digital VGA |
| MAX2063ETM+ | 功能描述:射频放大器 Dl 50-1000MHz Hi-Lin Analog/Digital VGA RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。