参数资料
型号: MAX2361ETM+T
厂商: Maxim Integrated
文件页数: 10/29页
文件大小: 460K
描述: IC TRANSMITTER QUAD 48TQFN-EP
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 2,500
频率: 800MHz ~ 2.2GHz
功率 - 输出: 9dBm
电流 - 传输: 146mA
数据接口: PCB,表面贴装
天线连接器: PCB,表面贴装
电源电压: 2.7 V ~ 3.3 V
工作温度: -40°C ~ 85°C
封装/外壳: 48-WFQFN 裸露焊盘
包装: 带卷 (TR)
Complete Dual-Band
Quadrature Transmitters
10   ______________________________________________________________________________________
Pin Description (continued)
PIN
MAX2361
MAX2363
MAX2365
NAME
FUNCTION
16, 17
16, 17

IFOUTH-,
IFOUTH+
Differential IF Outputs. These ports are active when the register bit IF_SEL is
1. They do not support FM mode. These pins must be inductively pulled up
to V
CC
. A differential IF bandpass filter is connected between this port and
IFINH+ or IFINH-. The pullup inductors can be part of the filter structure. The
differential output impedance of this port is nominally 600&. The transmission
lines from these pins should be short to minimize the pickup of spurious sig-
nals and noise.
18, 19

18, 19
IFOUTL-,
IFOUTL+
Differential IF Outputs. These ports are active when the register bit IF_SEL is
0. These pins must be inductively pulled up to V
CC
. A differential IF band-
pass filter is connected between this port and IFINL+ and IFINL-. The pullup
inductors can be part of the filter structure. The differential output impedance
of this port is nominally 600&. The transmission lines from these pins should
be short to minimize the pickup of spurious signals and noise.
20
20
20
GC
RF and IF Gain Control Analog Input. Apply 0.6V to 2.4V to control the gain of
the RF and IF stages. An RC filter on this pin should be used to reduce DAC
noise or PDM clock spurs from this line.
21
21
21
V
CC
Supply Pin for the IF VGA. Bypass with a capacitor as close to the pin as
possible. The bypass capacitor must not share its ground vias with any other
branches.
22
22
22
V
CC
Supply for the I/Q Modulator. Bypass with a capacitor as close to the pin as
possible. The bypass capacitor must not share its ground vias with any other
branches.
23, 24
23, 24
23, 24
Q+, Q-
Differential Q-Channel Baseband Inputs to the Modulator. These pins go
directly to the bases of a differential pair and require an external common-
mode bias voltage.
25, 26
25, 26
25, 26
I+, I-
Differential I-Channel Baseband Inputs to the Modulator. These pins go
directly to the bases of a differential pair and require an external common-
mode bias voltage.
27
27
27
SHDN
Shutdown Input, Drive to Logic High for Normal Operation. A logic low on
SHDN shuts down the entire IC except the serial interface and retains the
information in all registers. An R-C lowpass can be used to filter digital noise.
28
28
28
V
CC
Supply Pin to the VCO Section. Bypass as close to the pin as possible. The
bypass capacitor should not share its vias with any other branches.
29
29
29
IFLO
Buffered LO Output. Control the output buffer using register bit BUF_EN and
the divide ratio using the register bit BUF_DIV.
30, 31

30, 31
TANKL-,
TANKL+
Differential Tank Pins for the Low-Frequency IF VCO. These pins are internally
biased. VCO_SEL = 0 selects this IF VCO.
相关PDF资料
PDF描述
B-8-1 CORD PATCH BANANA PLUG 8" BROWN
ATS177-PL-A-A IC HALL SENSOR LATCH 25MA SIP-3L
MAX2361ETM+ IC TRANSMITTER QUAD 48TQFN-EP
MAX2365ETM+ IC TRANSMITTER QUAD 48TQFN-EP
CVHD-950-122.880 VCXO CMOS 122.880 MHZ 3.3V SMD
相关代理商/技术参数
参数描述
MAX2361ETM-TB4A 功能描述:射频发射器 RoHS:否 制造商:Micrel 类型:ASK Transmitter 封装 / 箱体:SOT-23-6 工作频率:300 MHz to 450 MHz 封装:Reel
MAX2361EVKIT 功能描述:射频开发工具 RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V
MAX2361EVKIT# 功能描述:射频开发工具 RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V
MAX2362ECM 功能描述:射频发射器 RoHS:否 制造商:Micrel 类型:ASK Transmitter 封装 / 箱体:SOT-23-6 工作频率:300 MHz to 450 MHz 封装:Reel
MAX2362ECM-T 功能描述:射频发射器 RoHS:否 制造商:Micrel 类型:ASK Transmitter 封装 / 箱体:SOT-23-6 工作频率:300 MHz to 450 MHz 封装:Reel