- 您现在的位置：买卖IC网 > Datasheet目录473 > MAX2831EVKIT+ (Maxim Integrated)KIT EVAL FOR MAX2831 Datasheet资料下载
参数资料
| 型号： | MAX2831EVKIT+ |
| 厂商： | Maxim Integrated |
| 文件页数： | 24/34页 |
| 文件大小： | 0K |
| 描述： | KIT EVAL FOR MAX2831 |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 1 |
| 类型： | 收发器，802.11 b/g |
| 频率： | 2.4GHz ~ 2.5GHz |
| 适用于相关产品： | MAX2831 |
| 已供物品： | 板 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页当前第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页
2.4GHz to 2.5GHz 802.11g/b
RF Transceivers with Integrated PA
Transmitter Variable-Gain Amplifier
The variable-gain amplifier of the transmitter provides
31dB of gain control range programmable in 0.5dB
steps over the top 8dB of the gain control range and in
1dB steps below that. The transmitter gain can be pro-
grammed serially through the SPI interface by setting
bits D5:D0 in Register 12 (A3:A0 = 1100) or in parallel
through the digital logic gain-control pins B6:B1 (pins
3, 6, 8, 11, 14, 23, and 34, respectively). Set bit D10 =
0 in Register 9 (A3:A0 = 1001) to enable parallel pro-
gramming, and set bit D10 = 1 to enable programming
through the 3-wire serial interface. See Table 10 for the
transmitter VGA gain-control settings.
Table 10. Transmitter VGA Gain-Control
Settings
Power-Amplifier Bias, Enable Delay
and Output Matching (MAX2831)
The MAX2831 integrates a 2-stage PA, providing
+18.5dBm of output power at 5.6% EVM (54Mbps
OFDM signal) in 802.11g mode while exceeding the
802.11g spectral mask requirements. The first and sec-
ond stage PA bias currents are set through program-
ming bits D2:D0 and bits D6:D3 in Register 10 (A3:A0 =
1010), respectively. An adjustable PA enable delay, rel-
ative to the transmitter enable (RXTX low-to-high transi-
tion), can be set from 200ns to 7μs through
programming bits D13:D10 in Register 10 (A3:A0 =
1010).
The PA of the MAX2831 has a 100 ? differential output
that is internally matched. The output has to be AC-cou-
pled using two off-chip 1.5pF capacitors to a 100 ? :50 ?
balun. Provide electrically symmetrical traces from the
NUMBER
63
62
61
:
49
48
47
46
45
44
:
5
4
3
2
1
0
D5:D0 Or
B6:B1
111111
111110
111101
:
110001
110000
101111
101110
101101
101100
:
000101
000100
000011
000010
000001
000000
OUTPUT SIGNAL POWER
Max
Max - 0.5dB
Max - 1.0dB
:
Max - 7dB
Max - 7.5dB
Max - 8dB
Max - 8dB
Max - 9dB
Max - 9dB
:
Max - 29dB
Max - 29dB
Max - 30dB
Max - 30dB
Max - 31dB
Max - 31dB
PA output to the balun to present a balanced load and to
reduce out-of-band spurs.
Power Detector (MAX2831)
The MAX2831 integrates a voltage-peak detector at the
PA output and provides an analog voltage proportional
to PA output power. See the Power Detector Over
Frequency and Power Detector Over Supply Voltage
graphs in the Typical Operating Characteristics . Set bits
D9:D8 = 10 in Register 8 (A3:A0 = 1000) to multiplex the
power-detector analog output voltage to the RSSI output
(pin 16).
Synthesizer Programming
The MAX2831/MAX2832 integrate a 20-bit sigma-delta
fractional-N synthesizer, allowing the device to achieve
excellent phase-noise performance (0.9° RMS from
10kHz to 10MHz), fast PLL settling times, and an RF fre-
quency step-size of 20Hz. The synthesizer includes a
divide-by-1 or a divide-by-2 reference frequency
divider, an 8-bit integer portion main divider with a divi-
sor range programmable from 64 to 255, and a 20-bit
fractional portion main-divider. Bit D2 in Register 5
(A3:A0 = 0101) sets the reference oscillator divider ratio
to 1 or 2. Bits D7:D0 in Register 3 (A3:A0 = 0011) set
Power-Amplifier Driver Output Matching (MAX2832)
The PA driver of the MAX2832 has a 100 ? differential
output with on-chip AC-coupling capacitors. Provide
electrically symmetrical traces to present a balanced
load to the PA driver output to help maintain driver lin-
earity and RF common-mode rejection.
the integer portion of the main divider. The 20-bit frac-
tional portion of the main-divider is split between two
registers. The 14 MSBs of the fractional portion are set
in Register 4 (A3:A0 = 0100), and the 6 LSBs of the frac-
tional portion of the main divider are set in Register 3
(A3:A0 = 0011). See Tables 11 and 12.
24
______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| MAX2837EVKIT+ | KIT EVAL FOR MAX2837 |
| MAX2838EVKIT+ | KIT EVAL FOR MAX2838 |
| MAX2839ASEVKIT+ | KIT EVAL FOR MAX2839A WLP |
| MAX2839EVKIT+ | KIT EVAL FOR MAX2839 |
| MAX2851ITK+ | TRANSMITTER MIMO 5GHZ 5CH 68TQFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX2831EVKIT+ | 功能描述:WiFi/802.11开发工具 MAX2831 Eval Kit RoHS:否 制造商:Roving Networks 产品:Evaluation Boards 工具用于评估:RN-171 支持协议:802.11 b/g 频率:2.4 GHz 接口类型:UART 工作电源电压:2 V to 16 V |
| MAX2832ETM+ | 制造商:Maxim Integrated Products 功能描述:2.4GHZ TO 2.5GHZ, 802.11G RF TRANSCEIVER 制造商:Maxim Integrated Products 功能描述:IC+MAX2832ETM+ - Rail/Tube |
| MAX2832ETM+CFK | 制造商:Maxim Integrated Products 功能描述:2.4GHZ TO 2.5GHZ, 802.11G RF TRANSCEIVERS WITH INTEGRATED PA - Rail/Tube |
| MAX2832ETM+T | 制造商:Maxim Integrated Products 功能描述:2.4GHZ TO 2.5GHZ, 802.11G RF TRANSCEIVER 制造商:Maxim Integrated Products 功能描述:2.4GHZ TO 2.5GHZ, 802.11G RF TRANSCEIVERS WITH INTEGRATED PA - Tape and Reel |
| MAX2832ETM+TCFK | 制造商:Maxim Integrated Products 功能描述:2.4GHZ TO 2.5GHZ, 802.11G RF TRANSCEIVERS WITH INTEGRATED PA - Tape and Reel |
发布紧急采购，3分钟左右您将得到回复。