- 您现在的位置：买卖IC网 > Datasheet目录473 > MAX2831EVKIT+ (Maxim Integrated)KIT EVAL FOR MAX2831 Datasheet资料下载
参数资料
| 型号： | MAX2831EVKIT+ |
| 厂商： | Maxim Integrated |
| 文件页数： | 26/34页 |
| 文件大小： | 0K |
| 描述： | KIT EVAL FOR MAX2831 |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 1 |
| 类型： | 收发器，802.11 b/g |
| 频率： | 2.4GHz ~ 2.5GHz |
| 适用于相关产品： | MAX2831 |
| 已供物品： | 板 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页当前第26页第27页第28页第29页第30页第31页第32页第33页第34页
2.4GHz to 2.5GHz 802.11g/b
RF Transceivers with Integrated PA
Crystal Oscillator
The crystal oscillator has been optimized to work with
low-cost crystals (e.g., Kyocera CX-3225SB). See Figure
1. The crystal oscillator frequency can be fine tuned
through bits D6:D0 in Register 14 (A3:A0 = 1110), which
control the value of C TUNE from 0.5pF to 15.4pF in
0.12pF steps. See the Crystal-Oscillator Offset
Frequency vs. Crystal-Oscillator Tuning Bits graph in the
Typical Operating Characteristics . The crystal oscillator
can be used as a buffer for an external reference fre-
quency source. In this case, the reference signal is AC-
coupled to the XTAL pin, and capacitors C1 and C2 are
not connected. When used as a buffer, the XTAL input
pin has to be AC-coupled. The XTAL pin has an input
impedance of 5k ? || 4pF, (set D6:D0 = 0000000 in
Register 14 A3:A0 = 1110).
MAX2831
MAX2832
Reference Clock Output Divider/Buffer
The reference oscillator of the MAX2831/MAX2832 has
a divider and a buffered output for routing the refer-
ence clock to the accompanying baseband IC. Bit D10
in Register 14 (A3:A0 = 1110) sets the buffer divider to
divide by 1 or 2, independent of the divide ratio for the
reference frequency provided to the PLL. Bit B9 in the
same register enables or disables the reference buffer
output. See the Clock Output waveform in the Typical
Operating Characteristics .
Loop Filter
The PLL charge-pump output, CPOUT (pin 24), con-
nects to an external third-order, lowpass RC loop-filter,
which in turn connects to the voltage tuning input,
TUNE (pin 32), of the VCO, completing the PLL loop.
The charge-pump output sink and source current is
1mA, and the VCO tuning gain is 103MHz/V at 0.5V
tune voltage and 86MHz/V at 2.2V tune voltage. The RC
loop-filter values have been optimized for a loop band-
width of 150kHz, to achieve the desired Tx/Rx turn-
around settling time, while maintaining loop stability
XTAL
C1
CTUNE
28
29
and good phase noise. Refer to the MAX2831 EV kit
schematic for the recommended loop-filter component
values. Keep the line from this pinto the tune input as
short as possible to prevent spurious pickup.
C2
C TUNE
1.35k ?
5.9k ?
Lock-Detector Output
The PLL features a logic lock-detect output. A logic-high
indicates the PLL is locked, and a logic-low indicates
the PLL is not locked. Bit D5 in Register 5 (A3:A0 =
0101) enables or disables the lock-detect output. Bit
FOR EXTERNAL REFERENCE CLOCK SET, C1 = C2 = OPEN
Figure 1. Crystal Oscillator Schematic
D12 in Register 1 (A3:A0 = 0001) configures the lock-
detect output as a CMOS or open-drain output. In open-
drain output mode, bit D9 in Register 5 (A3:A0 = 0101)
enables or disables an internal 30k ? pullup resistor
from the open-drain output.
26
______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| MAX2837EVKIT+ | KIT EVAL FOR MAX2837 |
| MAX2838EVKIT+ | KIT EVAL FOR MAX2838 |
| MAX2839ASEVKIT+ | KIT EVAL FOR MAX2839A WLP |
| MAX2839EVKIT+ | KIT EVAL FOR MAX2839 |
| MAX2851ITK+ | TRANSMITTER MIMO 5GHZ 5CH 68TQFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX2831EVKIT+ | 功能描述:WiFi/802.11开发工具 MAX2831 Eval Kit RoHS:否 制造商:Roving Networks 产品:Evaluation Boards 工具用于评估:RN-171 支持协议:802.11 b/g 频率:2.4 GHz 接口类型:UART 工作电源电压:2 V to 16 V |
| MAX2832ETM+ | 制造商:Maxim Integrated Products 功能描述:2.4GHZ TO 2.5GHZ, 802.11G RF TRANSCEIVER 制造商:Maxim Integrated Products 功能描述:IC+MAX2832ETM+ - Rail/Tube |
| MAX2832ETM+CFK | 制造商:Maxim Integrated Products 功能描述:2.4GHZ TO 2.5GHZ, 802.11G RF TRANSCEIVERS WITH INTEGRATED PA - Rail/Tube |
| MAX2832ETM+T | 制造商:Maxim Integrated Products 功能描述:2.4GHZ TO 2.5GHZ, 802.11G RF TRANSCEIVER 制造商:Maxim Integrated Products 功能描述:2.4GHZ TO 2.5GHZ, 802.11G RF TRANSCEIVERS WITH INTEGRATED PA - Tape and Reel |
| MAX2832ETM+TCFK | 制造商:Maxim Integrated Products 功能描述:2.4GHZ TO 2.5GHZ, 802.11G RF TRANSCEIVERS WITH INTEGRATED PA - Tape and Reel |
发布紧急采购，3分钟左右您将得到回复。