- 您现在的位置：买卖IC网 > PDF目录3763 > MAX3140CEI+ (Maxim Integrated Products)IC UART SPI MICRWR W/TXRX 28QSOP PDF资料下载
参数资料
| 型号： | MAX3140CEI+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 11/36页 |
| 文件大小： | 0K |
| 描述： | IC UART SPI MICRWR W/TXRX 28QSOP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 50 |
| 特点： | 收发器 |
| FIFO's： | 8 字节 |
| 规程： | RS232，RS485 |
| 电源电压： | 4.75 V ~ 5.25 V |
| 带IrDA 编码器/解码器： | 是 |
| 带故障启动位检测功能： | 是 |
| 带CMOS： | 是 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 28-QSOP |
| 供应商设备封装： | 28-QSOP |
| 包装： | 管件 |
| 产品目录页面： | 1404 (CN2011-ZH PDF) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页当前第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页
MAX3140
WRITE CONFIGURATION Register
(D15, D14 = 1, 1)
Configure the UART by writing a 16-bit word to the
WRITE CONFIGURATION register, which programs the
baud rate, data-word length, parity enable, and enable
of the 8-word receive FIFO. Set bits 15 and 14 of the
DIN configuration word to 1 to enable the WRITE CON-
FIGURATION mode. Bits 13–0 of the DIN configuration
word set the configuration of the UART. Table 2 shows
the bit assignment for the WRITE CONFIGURATION
register. The WRITE CONFIGURATION register allows
selection between normal UART timing and IrDA timing,
shutdown control, and contains four interrupt mask bits.
Setting the WRITE CONFIGURATION register clears the
receive FIFO and the R, T, RA/FE, D0r–D7r, D0t–D7t,
Pr, and Pt registers. Bits RTS and CTS remain
unchanged. The new configuration is valid on CS’s ris-
ing edge if the transmit buffer is empty (T = 1) and
transmission is over. If the latest transmission has not
been completed (T = 0), the registers are updated
when the transmission is over.
The WRITE CONFIGURATION register bits (FEN,
SHDNi, IR, ST, PE, L, B3–B0) take effect after the cur-
rent transmission is over. The mask bits (TM, RM, PM,
RAM) take effect immediately after SCLK’s 16th rising
edge.
Table 2. WRITE CONFIGURATION Register Bit Assignment (D15, D14 = 1, 1)
Notes:
bit 15, 14: DIN
1, 1 = Write Configuration
bit 13: DIN
FEN = 0, FIFO is enabled
FEN= 1, FIFO is disabled
bit 12: DIN
SHDNi = 1, Enter software shutdown
SHDNi = 0, Exit software shutdown
bit 11: DIN
TM = 1, Transmit-buffer-empty interrupt is enabled.
TM = 0, Transmit-buffer-empty interrupt is disabled.
bit 10: DIN
RM = 1, Data available in the receive register or FIFO interrupt
is enabled.
RM = 0, Data available in the receive register or FIFO interrupt
is disabled.
bit 9: DIN
PM = 1, Parity-bit-received interrupt is enabled.
PM = 0, Parity-bit-received interrupt is disabled.
bit 8: DIN
RAM = 1, Receiver-activity (shutdown mode)/Framing-error
(normal operation) interrupt is enabled.
RAM = 0, Receiver-activity (shutdown mode)/Framing-error
(normal operation) interrupt is disabled.
bit 7: DIN
IR = 1, IrDA mode is enabled.
IR = 0, IrDA mode is disabled.
bit 6: DIN
ST = 1, Transmit two stop bits
ST = 0, Transmit one stop bit
bit 5: DIN
PE = 1, Parity is enabled for both transmit (state of Pt) and
receive.
PE = 0, Parity is disabled for both transmit and receive.
bit 4: DIN
L = 1, 7-bit words (8-bit words if PE = 1)
L = 0, 8-bit words (9-bit words if PE = 1)
bit 3–0: DIN
B3–B0 = XXXX Baud-Rate Divisor select bits. See Table 6.
bit 15: DOUT
R = 1, Data is available to be read from the receive.
register or FIFO.
R = 0, Receive register and FIFO are empty.
bit 14: DOUT
T = 1, Transmit buffer is empty.
T = 0, Transmit buffer is full.
bit 13–0: DOUT
Zeros
6
ST
0
7
IR
0
2
B2
0
3
B3
0
0
B0
0
1
B1
0
4
L
0
5
PE
0
10
RM
0
11
TM
0
8
RAM
0
9
PM
0
12
SHDNi
0
13
FEN
0
15
14
1
T
DIN
1
DOUT
R
BIT
SPI/MICROWIRE-Compatible UART with Integrated
True Fail-Safe RS-485/RS-422 Transceivers
______________________________________________________________________________________
19
相关PDF资料 |
PDF描述 |
|---|---|
| MAX3100CPD+ | IC UART SPI MICROCOMPATBL 14-DIP |
| MAX3100CEE+ | IC UART SPI/MICRWIRE COMP 16QSOP |
| MAX3107EAG+T | IC UART SPI/I2C 128 FIFO 24SSOP |
| SC28C94A1A,518 | IC UART QUAD W/FIFO 52-PLCC |
| SC16C754BIA68,518 | IC UART QUAD W/FIFO 68-PLCC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX3140CEI+ | 功能描述:UART 接口集成电路 SPI/uWire Compatible RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel |
| MAX3140CEI+T | 功能描述:UART 接口集成电路 SPI/uWire Compatible RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel |
| MAX3140CEI-T | 功能描述:UART 接口集成电路 RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel |
| MAX3140EEI | 功能描述:UART 接口集成电路 RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel |
| MAX3140EEI+ | 功能描述:UART 接口集成电路 SPI/uWire Compatible RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。