- 您现在的位置：买卖IC网 > PDF目录3763 > MAX3140CEI+ (Maxim Integrated Products)IC UART SPI MICRWR W/TXRX 28QSOP PDF资料下载
参数资料
| 型号： | MAX3140CEI+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 14/36页 |
| 文件大小： | 0K |
| 描述： | IC UART SPI MICRWR W/TXRX 28QSOP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 50 |
| 特点： | 收发器 |
| FIFO's： | 8 字节 |
| 规程： | RS232，RS485 |
| 电源电压： | 4.75 V ~ 5.25 V |
| 带IrDA 编码器/解码器： | 是 |
| 带故障启动位检测功能： | 是 |
| 带CMOS： | 是 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 28-QSOP |
| 供应商设备封装： | 28-QSOP |
| 包装： | 管件 |
| 产品目录页面： | 1404 (CN2011-ZH PDF) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页当前第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页
MAX3140
SPI/MICROWIRE-Compatible UART with Integrated
True Fail-Safe RS-485/RS-422 Transceivers
______________________________________________________________________________________
21
Table 4. WRITE DATA Register Bit Assignment (D15, D14 = 1, 0)
14
0
T
6
D6t
D6r
7
D7t
D7r
15
2
DIN
1
D2t
DOUT
R
D2r
BIT
3
D3t
D3r
0
D0t
D0r
1
D1t
D1r
4
D4t
D4r
5
D5t
D5r
10
TE
RA/FE
11
0
8
Pt
Pr
9
RTS
CTS
12
0
13
0
Notes:
5, 14: DIN
1, 0 = Write Data
bit 13–11: DIN
Zeros
bit 10: DIN
TE = 1, Disables transmit, and only RTS will be updated.
TE = 0, Enables transmit.
bit 9: DIN
RTS = 1, Configures RTS = 0 (Logic Low).
RTS = 0, Configures RTS = 1 (Logic High).
bit 8: DIN
Pt = 1, Transmit parity bit is high. If PE = 1, a high parity bit will
be transmitted. If PE = 0, then no parity bit will be transmitted.
Pt = 0, Transmit parity bit is low. If PE = 1, a low parity bit will be
transmitted. If PE = 0, then no parity bit will be transmitted.
bit 7–0: DIN
D7t–D0t = Transmitting Data bits. D7t is ignored when L = 1.
bit 15: DOUT
R = 1, Data is available to be read from the receive register or
FIFO.
R = 0, Receive register and FIFO are empty.
bit 14: DOUT
T = 1, Transmit buffer is empty.
T = 0, Transmit buffer is full.
bit 13–11: DOUT
Zeros
bit 10: DOUT
RA/FE = Receive-activity (UART shutdown)/Framing-error
(normal operation) bit.
bit 9: DOUT
CTS = CTS input state. If CTS = 0, then CTS = 1 and vice versa.
bit 8: DOUT
Pr = Received parity bit. This is only valid if PE = 1.
bit 7–0: DOUT
D7t–D0t = Received Data bits. D7r = 0 for L = 1.
Test Mode
The device enters a test mode if bit 0 of the DIN config-
uration word equals 1 when performing a READ CON-
FIGURATION. In this mode, if CS = 0, the RTS pin
transmits a clock that is 16 times the baud rate. The TX
pin is low as long as CS remains low while in test mode.
Table 3 shows the bit assignment for the READ CON-
FIGURATION register.
WRITE DATA Register (D15, D14 = 1, 0)
Use the WRITE DATA register for transmitting to the TX
buffer and receiving from the RX buffer (and RX FIFO
when enabled). When using this register, the DIN and
DOUT WRITE DATA words are used simultaneously
and bits 13–11 for both the DIN and DOUT WRITE
DATA words are meaningless zeros. The DIN WRITE
DATA word contains the data that is being transmitted,
and the DOUT WRITE DATA word contains the data
that is being received from the RX FIFO. Table 4 shows
the bit assignment for the WRITE DATA register. To
change the RTS pin’s output state without transmitting
data, set the TE bit high. If performing a WRITE DATA
operation, the R bit clears on the falling edge of SCLK’s
16th clock pulse if no new data is available.
READ DATA Register (D15, D14 = 0, 0)
Use the READ DATA register for receiving data from
the RX FIFO. When using this register, bits 15 and 14 of
DIN must both be 0. Clear bits 13–0 of the DIN READ
DATA word. Table 5 shows the bit assignments for the
READ DATA register. Reading all available data clears
the R bit and interrupt IRQ. If performing a READ DATA
operation, the R bit clears on the falling edge of SCLK’s
16th clock pulse if no new data is available.
相关PDF资料 |
PDF描述 |
|---|---|
| MAX3100CPD+ | IC UART SPI MICROCOMPATBL 14-DIP |
| MAX3100CEE+ | IC UART SPI/MICRWIRE COMP 16QSOP |
| MAX3107EAG+T | IC UART SPI/I2C 128 FIFO 24SSOP |
| SC28C94A1A,518 | IC UART QUAD W/FIFO 52-PLCC |
| SC16C754BIA68,518 | IC UART QUAD W/FIFO 68-PLCC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX3140CEI+ | 功能描述:UART 接口集成电路 SPI/uWire Compatible RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel |
| MAX3140CEI+T | 功能描述:UART 接口集成电路 SPI/uWire Compatible RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel |
| MAX3140CEI-T | 功能描述:UART 接口集成电路 RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel |
| MAX3140EEI | 功能描述:UART 接口集成电路 RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel |
| MAX3140EEI+ | 功能描述:UART 接口集成电路 SPI/uWire Compatible RoHS:否 制造商:Texas Instruments 通道数量:2 数据速率:3 Mbps 电源电压-最大:3.6 V 电源电压-最小:2.7 V 电源电流:20 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:LQFP-48 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。