参数资料
| 型号： | MAX3600CTL+ |
| 厂商： | Maxim Integrated |
| 文件页数： | 14/23页 |
| 文件大小： | 0K |
| 描述： | IC LASER DVR PROJECTOR 40TQFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 60 |
| 类型： | 激光二极管驱动器 |
| 通道数： | 4 |
| 电源电压： | 3.3V |
| 工作温度： | 0°C ~ 70°C |
| 封装/外壳： | 40-TQFN 裸露焊盘 |
| 供应商设备封装： | 40-TQFN EP |
| 包装： | 托盘 |
| 安装类型： | 表面贴装 |
Laser Driver for Projectors
Control Logic
The control logic provides video selection, laser enable,
and power savings.
Video Selection
The video demultiplexer creates signals VIDEO1 ,
VIDEO2 , and VIDEO3 . The VSEL[1/3/4] bits can be used
to select the input video for OUTPUT1, OUTPUT3, and
OUTPUT4.
Laser Control
When EN_MAIN is low, all driver outputs are off. This
signal works asynchronously (no clock is required to
disable outputs).
The video marker (VM) input can be used to disable
selected outputs when a video signal is not present
(Figure 11). The VM_EN[1:4] bit settings determine
which outputs respond to the VM signal.
Propagation delay from VM ↑ or EN_MAIN ↑ to output
active is typically 35ns + 2/f PIXEL .
VIDEO AREA
VM = 1
Periodic Off Generator
The periodic off (PO) generator quickly switches off
OUTPUT2. The PO event is placed within a pixel if PO is
set high during a pixel as shown in Figure 12.
The PO event location within the pixel is programmed
from the serial port. Each pixel is divided into “m” equal
time subpixels as shown in Figure 13. The PO_M setting
determines the number of subpixels, where:
m = (PO_M +1) x 8
The PO start and PO stop locations (in subpixels) are
defined by the P1, P1S, P2, and P2S bits.
Start Subpixel =
[(P1 + 1) MOD (PO_M + 1)] x 8 + P1S + 1
Stop Subpixel =
[(P2 + 1) MOD (PO_M + 1)] x 8 + P2S + 1
The start and stop locations should be selected to
ensure that the PO event occurs > one rise/fall time from
the pixel update. The minimum off-time is four subpixels.
Select P1, P2 P PO_M.
The PO oscillator frequency (f PO ) = f PIXEL x (PO_M + 1).
The intended operating range for f PO is 133MHz to
200MHz.
OUT2 (GREEN LASER CURRENT)
PO EVENT
NONVIDEO AREA (VM = 0)
SELECTED OUTPUTS DISABLED
PO
PIXEL 1
1
PIXEL 2
0
PIXEL 3
1
PIXEL 4
0
HORIZONTAL SCAN
Figure 11. Video Marker
14
Figure 12. Periodic Off (PO) Example
TIME
相关PDF资料 |
PDF描述 |
|---|---|
| MAX3643ETG+T | IC LASR DRVR 2.5GBPS 3.6V 24TQFN |
| MAX3646ETG+T | IC LSR DRVR 622MBPS 3.63V 24TQFN |
| MAX3656ETG+ | IC LASR DRVR 2.5GBPS 3.6V 24TQFN |
| MAX3668EHJ+T | IC LSR DRVR 622MBPS 3.63V 32TQFP |
| MAX3669EHJ+T | IC LASR DRVR 622MBPS 5.5V 32TQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX3600CTL+ | 功能描述:激光驱动器 Laser Driver For Projectors RoHS:否 制造商:Micrel 数据速率:4.25 Gbps 工作电源电压:3 V to 3.6 V 电源电流:80 mA 最大工作温度:+ 85 C 封装 / 箱体:QFN-16 封装:Tube |
| MAX3600CTL+T | 功能描述:激光驱动器 Laser Driver For Projectors RoHS:否 制造商:Micrel 数据速率:4.25 Gbps 工作电源电压:3 V to 3.6 V 电源电流:80 mA 最大工作温度:+ 85 C 封装 / 箱体:QFN-16 封装:Tube |
| MAX3600EVKIT# | 功能描述:激光驱动器 Laser Driver for Projectors RoHS:否 制造商:Micrel 数据速率:4.25 Gbps 工作电源电压:3 V to 3.6 V 电源电流:80 mA 最大工作温度:+ 85 C 封装 / 箱体:QFN-16 封装:Tube |
| MAX36025+ | 制造商:Maxim Integrated Products 功能描述:SECURITY MGR 2-AES ENCRYPT & AUTH - Rail/Tube |
| MAX36025EVKIT# | 制造商:Maxim Integrated Products 功能描述:- Boxed Product (Development Kits) |
发布紧急采购，3分钟左右您将得到回复。