- 您现在的位置：买卖IC网 > PDF目录2011 > MAX5874EGK+D (Maxim Integrated Products)IC DAC 14BIT 200MSPS DUAL 68-QFN PDF资料下载
参数资料
| 型号： | MAX5874EGK+D |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 16/16页 |
| 文件大小： | 0K |
| 描述： | IC DAC 14BIT 200MSPS DUAL 68-QFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 30 |
| 设置时间： | 14ns |
| 位数： | 14 |
| 数据接口： | 并联 |
| 转换器数目： | 2 |
| 电压电源： | 模拟和数字 |
| 功率耗散（最大）： | 300mW |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 68-VFQFN 裸露焊盘 |
| 供应商设备封装： | 68-QFN 裸露焊盘（10x10） |
| 包装： | 管件 |
| 输出数目和类型： | 4 电流，单极 |
| 采样率（每秒）： | 200M |
| 产品目录页面： | 1398 (CN2011-ZH PDF) |
MAX5874
14-Bit, 200Msps, High-Dynamic-Performance,
Dual DAC with CMOS Inputs
_______________________________________________________________________________________
9
Detailed Description
Architecture
The MAX5874 high-performance, 14-bit, dual current-
steering DAC (Figure 1) operates with DAC update rates
up to 200Msps. The converter consists of input registers
and a demultiplexer for single-port (interleaved) mode,
followed by a current-steering array. During operation in
interleaved mode, the input data registers demultiplex
the single-port data bus. The current-steering array gen-
erates differential full-scale currents in the 2mA to 20mA
range. An internal current-switching network, in combina-
tion with external 50 termination resistors, converts the
differential output currents into dual differential output
voltages with a 0.1V to 1V peak-to-peak output voltage
range. An integrated 1.2V bandgap reference, control
amplifier, and user-selectable external resistor determine
the data converter’s full-scale output range.
Reference Architecture and Operation
The MAX5874 supports operation with the internal 1.2V
bandgap reference or an external reference voltage
source. REFIO serves as the input for an external, low-
impedance reference source. REFIO also serves as a
reference output when the DAC operates in internal ref-
erence mode. For stable operation with the internal ref-
erence, decouple REFIO to GND with a 1F capacitor.
Due to its limited output-drive capability, buffer REFIO
with an external amplifier when driving large
external loads.
The MAX5874’s reference circuit (Figure 2) employs a
control amplifier to regulate the full-scale current
IOUTFS for the differential current outputs of the DAC.
Calculate the full-scale output current as follows:
where IOUTFS is the full-scale output current of the
DAC. RSET (located between FSADJ and DACREF)
determines the amplifier’s full-scale output current for
the DAC. See Table 1 for a matrix of different IOUTFS
and RSET selections.
I
V
R
OUTFS
REFIO
SET
=×
×
32
1
2
14
Pin Description (continued)
PIN
NAME
FUNCTION
42
XOR
DAC Exclusive-OR Select Input. Set XOR low to allow the data stream to pass unchanged to the
DAC input. Set XOR high to invert the input data into the DAC. If unused, connect XOR to GND.
44
SELIQ
DAC Select Input. Set SELIQ low to direct data into the Q-DAC inputs. Set SELIQ high to direct
data into the I-DAC inputs. If unused, connect SELIQ to GND. SELIQ’s logic state is only valid in
single-port (interleaved) mode.
45–58
B13, B12, B11,
B10, B9, B8,
B7, B6, B5, B4,
B3, B2, B1, B0
Data Bits B13–B0. In dual-port mode, data is directed to the I-DAC. In single-port mode, the state
of SELIQ determines where the data bits are directed.
61
DVDD1.8
Digital Supply Voltage. Accepts a 1.71V to 1.89V supply voltage range. Bypass with a 0.1F
capacitor to GND.
62–68
A13, A12, A11,
A10, A9, A8, A7
Data Bits A13–A7. In dual-port mode, data is directed to the Q-DAC. In single-port mode, data
bits are not used. Connect bits A13–A7 to GND in single-port mode.
—
EP
Exposed Pad. Must be connected to GND through a low-impedance path.
Table 1. IOUTFS and RSET Selection
Matrix Based on a Typical 1.200V
Reference Voltage
RSET (
)
FULL-SCALE
CURRENT IOUTFS (mA)
CALCULATED
1% EIA STD
2
19.2k
19.1k
5
7.68k
7.5k
10
3.84k
3.83k
15
2.56k
2.55k
20
1.92k
1.91k
相关PDF资料 |
PDF描述 |
|---|---|
| MAX5875EGK+D | IC DAC 16BIT DUAL 200MSPS 68-QFN |
| MAX5876EGK+D | IC DAC 12BIT DUAL 250MSPS 68-QFN |
| MAX5877EGK+D | IC DAC 14BIT DUAL 250MSPS 68-QFN |
| MAX5878EGK+D | IC DAC 16BIT DUAL 250MSPS 68-QFN |
| MAX5884EGM+D | IC DAC 14BIT 3.3V 200MSPS 48-QFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX5874EGK-TD | 功能描述:数模转换器- DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| MAX5874EVKIT | 功能描述:数模转换器- DAC Evaluation Kit for the MAX5873 MAX5874 MAX5875 RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| MAX5875EGK | 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述: |
| MAX5875EGK+D | 功能描述:数模转换器- DAC 16-Bit 2Ch 200Msps DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| MAX5875EGK+TD | 功能描述:数模转换器- DAC 16-Bit 2Ch 200Msps DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。