参数资料
| 型号： | MAX6373KA-T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 6/10页 |
| 文件大小： | 0K |
| 描述： | IC WATCHDOG TIMER SOT23-8 |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 1 |
| 类型： | 监视器电路 |
| 监视电压数目： | 1 |
| 输出： | 开路漏极或开路集电极 |
| 复位： | 低有效 |
| 复位超时： | 可调节/可选择 |
| 电压 - 阀值： | 可调节/可选择 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | SOT-23-8 |
| 供应商设备封装： | SOT-23-8 |
| 包装： | 剪切带 (CT) |
| 其它名称： | MAX6373KA-TCT |
MAX6369–MAX6374
Pin-Selectable Watchdog Timers
V CC
WDI
MAX6369–MAX6374
TRANSITION
DETECTOR
EN
SET 2
SET 1
CONTROL
LOGIC
ENABLE
CLEAR
SET 0
SET WATCHDOG TIMEOUT
OUT
OUTPUT
WDO
SET STARTUP DELAY
WATCHDOG
TIMER CIRCUITRY
GND
Figure 1. Functional Diagram
V CC
t SETUP
t DELAY
t WD
t WD
t WD
WDI
A
A
B
C
D
E F
G
E
WDO
A TRANSITIONS ON WDI IGNORED DURING SETUP DELAY.
B TRANSITION(S) ON WDI IGNORED DURING STARTUP DELAY PERIOD.
C WATCHDOG TIMER STARTS AFTER STARTUP DELAY AND WDO IS DEASSERTED.
D TRANSITION OCCURS BEFORE WATCHDOG TIMEOUT PERIOD. WATCHDOG
TIMER CLEARS AND STARTS TIMER AGAIN.
E WATCHDOG TIMES OUT, WDO ASSERTS.
F TRANSITIONS ON WDI IGNORED WHEN WDO ASSERTED.
G WATCHDOG TIMER STARTS AFTER WDO DEASSERTS.
Figure 2. Watchdog Timing
t WDO
? Watchdog Timeout Period:
Normal operating watchdog timeout period after the
initial startup delay.
A watchdog output pulse is asserted if a valid watch-
dog input transition is not received before the timeout
period elapses.
Eight pin-selectable timeout period options for each
device, from 30μs to 60s.
Pin-selectable watchdog timer disable feature.
6
? Watchdog Output/Timing Options:
Open drain, active low with 100ms minimum watch-
dog output pulse (MAX6369/MAX6371/MAX6373).
Push-pull, active low with 1ms minimum watchdog
output pulse (MAX6370/MAX6372/MAX6374).
Each device has a watchdog startup delay that is initi-
ated when the supervisor is first powered or after the
user modifies any of the logic control set inputs. The
watchdog timer does not begin to count down until the
Maxim Integrated
相关PDF资料 |
PDF描述 |
|---|---|
| MAX6378XR35-T | IC VOLT DETECTOR LP 3.50V SC70-3 |
| MAX637ACSA | IC REG INV -15V/ADJ 50MA 8SOIC |
| MAX638ACSA | IC REG BUCK 5V/ADJ 75MA 8SOIC |
| MAX6392KA29+T | IC SUPERVISOR MPU DL SOT23-8 |
| MAX6394US300D4+T | IC MPU/RESET CIRC 3.0V SOT143-4 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX6374KA | 制造商:Maxim Integrated Products 功能描述:8-SOT_ - Rail/Tube |
| MAX6374KA/V+T | 功能描述:计时器和支持产品 Pin-Selectable Watchdog Timer RoHS:否 制造商:Micrel 类型:Standard 封装 / 箱体:SOT-23 内部定时器数量:1 电源电压-最大:18 V 电源电压-最小:2.7 V 最大功率耗散: 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装:Reel |
| MAX6374KA+ | 制造商:Maxim Integrated Products 功能描述:PROCESSOR SUPERVISOR 8UA 8PIN SOT-23 - Rail/Tube |
| MAX6374KA+T | 功能描述:监控电路 Pin-Selectable Watchdog Timer RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟（典型值）:10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel |
| MAX6374KA-T | 功能描述:监控电路 RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟（典型值）:10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。