参数资料
型号: MAX6705SKA+T
厂商: Maxim Integrated Products
文件页数: 5/12页
文件大小: 0K
描述: IC SUPERVISOR MPU LV SOT23-8
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 1
类型: 多压监控器
监视电压数目: 2
输出: 推挽式,图腾柱
复位: 低有效
复位超时: 最小为 140 ms
电压 - 阀值: 2.93V,可调
工作温度: -40°C ~ 125°C
安装类型: 表面贴装
封装/外壳: SOT-23-8
供应商设备封装: SOT-23-8
包装: 标准包装
其它名称: MAX6705SKA+TDKR
Low-Voltage, SOT23 μP Supervisors with Power-
Fail In/Out, Manual Reset, and Watchdog Timer
Pin Description
PIN
MAX6701(A)
MAX6702(A) MAX6704
MAX6703(A)
MAX6705(A)
MAX6706(A) MAX6708
MAX6707(A)
NAME
FUNCTION
Active-Low, Manual Reset Input, Internal 50k ? Pullup to V CC .
Pull low to force a reset. Reset remains active as long as MR is
1
1
1
1
MR
low and the reset timeout period after MR goes high. Leave
unconnected or connect to V CC if unused. WDO deasserts
when MR is low (MAX6701(A)/MAX6702(A)/MAX6703(A)/
MAX6705(A)/ MAX6706(A)/MAX6707(A) only).
2
3
2
3
2
3
2
3
V CC
GND
Supply Voltage for MAX6701 – MAX6708 and Input for Primary
Reset Threshold Monitor. Push-pull outputs are powered by V CC .
Ground
Power-Fail Voltage Monitor Input. High-impedance input for
4
4
4
PFI
internal power-fail comparator. Connect this pin to an external
resistive-divider network to set the reset threshold voltage;
0.62V (typ) threshold. Connect to GND or V CC when not used.
5
5
5
PFO
Power-Fail Monitor Output. Open drain or push-pull active low.
PFO goes low when PFI is less than 0.62V.
Watchdog Input. If WDI remains high or low for longer than the
watchdog timeout period, the internal watchdog timer runs out and
WDO is asserted. WDO is asserted low after each watchdog
overflow and remains low until the watchdog timer is cleared (the
reset output is not affected). The internal watchdog timer clears
6
6
6
WDI
whenever a V CC /RST_IN1/RST_IN2 reset is asserted, the manual
reset is asserted, or WDI sees a rising or falling edge. The
watchdog timer remains cleared until the reset output is
deasserted. On the MAX6704, RESET pulse asserts for the reset
timeout period after each watchdog timeout overflow. The
watchdog timer cannot be disabled.
6
N.C.
No Connection. Not internally connected.
Active-Low Reset Output (Open Drain or Push-Pull). RESET
changes from high to low when the V CC input drops below the
7
7
7
7
RESET
selected reset threshold (or RST_IN1/ RST_IN2 for the
MAX6701(A)/MAX6702(A)/MAX6703(A), MR is pulled low, or the
watchdog triggers a reset (MAX6704 only). RESET remains low for
the reset timeout period after the reset conditions are terminated.
_______________________________________________________________________________________
5
相关PDF资料
PDF描述
UKA1A220MDD1TD CAP ALUM 22UF 10V 20% RADIAL
RP10-2405DE/N CONV DC/DC 10W 18-36VIN +/-05V
LHL10NB8R2M INDUCTOR 8.2UH 3.3A RADIAL
VE-JVM-EZ-F1 CONVERTER MOD DC/DC 10V 25W
RP10-2405DE/M1 CONV DC/DC 10W 18-36VIN +/-05V
相关代理商/技术参数
参数描述
MAX6705TKA 制造商:Maxim Integrated Products 功能描述:LOW-VOLTAGE SOT23 UP SUPERVISOR WITH POWER F - Bulk 制造商:Rochester Electronics LLC 功能描述:
MAX6705TKA+ 制造商:Maxim Integrated Products 功能描述:MAXIM MAX6705TKA+ PROCESSOR SUPERVISORS - Tape and Reel 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述:Maxim MAX6705TKA+ Processor Supervisors
MAX6705TKA+T 功能描述:监控电路 Single uPower Supervisor RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟(典型值):10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel
MAX6705TKA-T 功能描述:监控电路 RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟(典型值):10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel
MAX6705YKA 制造商:Maxim Integrated Products 功能描述:LOW-VOLTAGE SOT23 UP SUPERVISOR WI - Rail/Tube