- 您现在的位置：买卖IC网 > PDF目录20159 > MAX6959BAPE+ (Maxim Integrated)IC DRVR DSPL LED 16-DIP PDF资料下载
参数资料
| 型号： | MAX6959BAPE+ |
| 厂商： | Maxim Integrated |
| 文件页数： | 5/19页 |
| 文件大小： | 0K |
| 描述： | IC DRVR DSPL LED 16-DIP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 25 |
| 显示器类型： | LED |
| 配置： | 7 段 + 2 个信号器 |
| 接口： | SMBus（2 线/I²C） |
| 数字或字符： | 4 位数字 |
| 电流 - 电源： | 5.9mA |
| 电源电压： | 3 V ~ 5.5 V |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 通孔 |
| 封装/外壳： | 16-DIP（0.300"，7.62mm） |
| 供应商设备封装： | 16-PDIP |
| 包装： | 管件 |
2-Wire Interfaced, 3V to 5.5V, 4-Digit,
9-Segment LED Display Drivers with Keyscan
Pin Description
MAX6958
1
2
3
—
PIN
MAX6959
1
2
—
3
NAME
SDA
SCL
SEG9
IRQ/SEG9
FUNCTION
Serial Data I/O
Serial Clock Input
Segment Output. Segment driver sourcing current to a display anode.
Interrupt or Segment Output. May be segment driver sourcing current to a display
anode, or open-drain interrupt output, or open-drain logic output.
Digit and Segment Drivers. Digit X outputs sink current from the display common
4–7, 11–15
4–7, 11–15
DIGX, SEGX
cathode when acting as digit drivers. Segment X drivers source current to the display
anodes. Segment/digit drivers are high impedance when turned off.
8
9, 10
—
—
16
8
—
9
10
16
GND
N.C.
INPUT1
INPUT2
V+
Ground
No Connect. Connect to V+ or leave open.
General-Purpose Input Port 1 with Internal Pullup. May be configured as general-
purpose logic input or keyscan input. Connect to V+ or leave open if unused.
General-Purpose Input Port 2 with Internal Pullup. May be configured as general-
purpose logic input or keyscan input. Connect to V+ or leave open if unused.
Positive Supply Voltage
Detailed Description
The MAX6958/MAX6959 serially interfaced display dri-
vers drive up to: four 7-segment digits plus four dis-
crete LEDs if the decimal points are used, or four
7-segment digits plus eight discrete LEDs if the deci-
mal points are not used, or 36 discrete LEDs. Table 1
lists the display connection scheme.
The MAX6958/MAX6959 include the hexadecimal font
map for seven-segment displays. The seven-segment
LED digits can be controlled directly or programmed to
use the hexadecimal font. Direct segment control
allows the MAX6958/MAX6959 to drive bar graphs and
discrete LED indicators.
The MAX6958/MAX6959 use a multiplexing scheme that
minimizes the connections between the driver and LED
display. The MAX6958/MAX6959 can drive monocolor
and bicolor single-digit type displays, and monocolor
dual-digit displays. Dual-digit displays internally
wire together the equivalent segments for each digit,
requiring only eight segment pins instead of 16. The
MAX6958/MAX6959 can also drive multidigit LED dis-
plays that have the segments individually pinned for
each digit.
To connect four single-digit displays to the MAX6958/
MAX6959, connect cathode outputs DIG0/SEG0 –
DIG3/SEG3 to the cathodes of the four display digits as
shown in Table 1 (CC0–CC3). Drive eight additional
LEDs with SEG0 to SEG7. Four of the eight LEDs can
be the decimal point (DP) segments of the four dis-
plays, and the other four can be discrete LED indica-
tors.
To connect two dual-digit displays to the MAX6958/
MAX6959, connect cathode outputs DIG0/SEG0 and
DIG1/SEG1 to the cathodes of the first dual digit.
Connect DIG2/SEG2 and DIG3/SEG3 to the cathodes
of the second dual digit. SEG0 to SEG3 can only drive
discrete LEDs, not digit DP segments. SEG4 to SEG7
can drive the DP segments if required. Bicolor single-
digit displays are connected and treated as dual-digit
displays, each digit being one of the two colors.
Table 1. Standard Driver Connection to LED Displays
DIG0/SEG0 DIG1/SEG1
DIG2/SEG2
DIG3/SEG3
SEG 4
SEG 5
SEG 6
SEG 7
SEG 8
SEG 9/IRQ
LED Digit 0
LED Digit 1
LED Digit 2
LED Digit 3
CC0
SEG 1
SEG g
SEG g
SEG 0
CC1
SEG f
SEG f
SEG g
SEG g
CC2
SEG 3
SEG f
SEG f
SEG 2
CC3
SEG e
SEG e
SEG e
SEG e
SEG d
SEG d
SEG d
SEG d
SEG c
SEG c
SEG c
SEG c
SEG b
SEG b
SEG b
SEG b
SEG a
SEG a
SEG a
SEG a
SEG 4
SEG 5
SEG 6
SEG 7
_______________________________________________________________________________________
5
相关PDF资料 |
PDF描述 |
|---|---|
| TPSB476K006R0250 | CAP TANT 47UF 6.3V 10% 1210 |
| RY-2409D/P | CONV DC/DC 1W 24VIN +/-09VOUT |
| RBB11DHHN | CONN EDGECARD 22POS DIP .050 SLD |
| TPSB475K020R1000 | CAP TANT 4.7UF 20V 10% 1210 |
| RCB11DHHD | CONN EDGECARD 22POS DIP .050 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX6959BAPE+ | 功能描述:LED显示驱动器 3-5.5V 4-Digit 9-Seg LED Display Driver RoHS:否 制造商:Micrel 数位数量:5 片段数量: 安装风格:SMD/SMT 封装 / 箱体:PLCC-44 工作电源电压:4.75 V to 11 V 最大电源电流:10 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装:Tube |
| MAX6959EVKIT+ | 功能描述:LED 照明开发工具 Evaluation Board RoHS:否 制造商:Fairchild Semiconductor 产品:Evaluation Kits 用于:FL7732 核心: 电源电压:120V 系列: 封装: |
| MAX695C/D | 功能描述:监控电路 RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟（典型值）:10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel |
| MAX695C/D DIE | 制造商:Maxim Integrated Products 功能描述: |
| MAX695CPE | 功能描述:监控电路 RoHS:否 制造商:STMicroelectronics 监测电压数: 监测电压: 欠电压阈值: 过电压阈值: 输出类型:Active Low, Open Drain 人工复位:Resettable 监视器:No Watchdog 电池备用开关:No Backup 上电复位延迟（典型值）:10 s 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UDFN-6 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。