- 您现在的位置：买卖IC网 > PDF目录16211 > MAX8725ETI+ (Maxim Integrated Products)IC CHARGER BATTERY 28-TQFN PDF资料下载
参数资料
| 型号： | MAX8725ETI+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 17/30页 |
| 文件大小： | 0K |
| 描述： | IC CHARGER BATTERY 28-TQFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 60 |
| 功能： | 充电管理 |
| 电池化学： | 多化学 |
| 电源电压： | 8 V ~ 28 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 28-WFQFN 裸露焊盘 |
| 供应商设备封装： | 28-TQFN-EP（5x5） |
| 包装： | 托盘 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页当前第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页
Multichemistry Battery Chargers with Automatic
System Power Selector
V BATT = CELL ? V REF + ? VCTL
? ?
Detailed Description
The MAX1909/MAX8725 include all of the functions
necessary to charge Li+, NiMH, and NiCd batteries. A
high-efficiency, synchronous-rectified step-down DC-
DC converter is used to implement a precision con-
stant-current, constant-voltage charger with input
current limiting. The DC-DC converter uses external
p-channel/n-channel MOSFETs as the buck switch and
synchronous rectifier to convert the input voltage to the
required charge current and voltage. The charge cur-
rent and input current-limit sense amplifiers have low-
input-referred offset errors and can use small-value
sense resistors. The MAX1909/MAX8725 feature a volt-
age-regulation loop (CCV) and two current-regulation
loops (CCI and CCS). The CCV voltage-regulation loop
monitors BATT to ensure that its voltage never exceeds
the voltage set by VCTL. The CCI battery current-regu-
lation loop monitors current delivered to BATT to ensure
that it never exceeds the current limit set by ICTL. A
third loop (CCS) takes control and reduces the charge
current when the sum of the system load and the input-
referred charge current exceeds the power source cur-
rent limit set by CLS. Tying CLS to the reference
voltage provides a 7.5A input current limit with a 10m Ω
sense resistor.
The ICTL, VCTL, and CLS analog inputs set the charge
current, charge voltage, and input current limit, respec-
tively. For standard applications, internal set points for
ICTL and VCTL provide a 3A charge current using a
15m Ω sense resistor and a 4.2V per-cell charge volt-
age. The variable for controlling the number of cells is
set with the MODE input. The MAX8725 includes a
PKPRES input used for battery-pack detection.
Based on the presence or absence of the AC adapter,
the MAX1909/MAX8725 automatically provide an open-
drain logic output signal ACOK and select the appropri-
ate source for supplying power to the system. A
p-channel load switch controlled from the PDL output and
a similar p-channel source switch controlled from the PDS
output are used to implement this function. Using the
MODE control input, the MAX1909/MAX8725 can be pro-
grammed to perform a relearning, or conditioning, cycle
in which the battery is isolated from the charger and com-
pletely discharged through the system load. When the
battery reaches 100% depth of discharge, it is recharged
Setting the Charge Voltage
The MAX1909/MAX8725 use a high-accuracy voltage
regulator for charge voltage. The VCTL input adjusts
the battery output voltage. In default mode (VCTL =
LDO), the overall accuracy of the charge voltage is
±0.5%. VCTL is allowed to vary from 0 to 3.6V, which
provides a 10% adjustment range of the battery volt-
age. Limiting the adjustment range reduces the sensi-
tivity of the charge voltage to external resistor
tolerances from ±1% to ±0.05%. The overall accuracy
of the charge voltage is better than ±1% when using
±1% resistors to divide down the reference to establish
VCTL. The per-cell battery termination voltage is a func-
tion of the battery chemistry and construction. Consult
the battery manufacturer to determine this voltage. The
battery voltage is calculated by the equation:
? ? V ? 1 . 8V ? ?
? ? 9 . 52 ? ?
where V REF = 4.2235V, and CELL is the number of cells
selected with the MAX1909/MAX8725s’ trilevel MODE
control input. When MODE is tied to the LDO output,
CELL = 4. When MODE is left floating, CELL = 3. When
MODE is tied to ground, the charger enters condition-
ing mode, which is used to isolate the battery from the
charger and discharge it through the system load. See
the Conditioning Mode section. The internal error ampli-
fier (GMV) maintains voltage regulation (see Figure 3
for the Functional Diagram). The voltage-error amplifier
is compensated at CCV. The component values shown
in Figures 1 and 2 provide suitable performance for
most applications. Individual compensation of the volt-
age regulation and current-regulation loops allow for
optimal compensation. See the Compensation section.
Setting the Charge Current
The voltage on the ICTL input sets the maximum
voltage across current-sense resistor RS2, which in turn
determines the charge current. The full-scale differen-
tial voltage between CSIP and CSIN is 75mV; thus, for a
0.015 Ω sense resistor, the maximum charge current is
5A. In default mode (ICTL = LDO), the sense voltage is
45mV with an overall accuracy of ±5%. The charge cur-
rent is programmed with ICTL using the equation:
× ICTL
to full capacity.
The circuit shown in Figure 1 demonstrates a simple
hardwired application, while Figure 2 shows a typical
application for smart-battery systems with variable
charge current and source switch configuration that sup-
ports battery conditioning. Smart-battery systems typical-
ly use a host μC to achieve this added functionality.
I CHG =
0 . 075 V
RS 2 3 . 6 V
______________________________________________________________________________________
17
相关PDF资料 |
PDF描述 |
|---|---|
| EBM25DRYS | CONN EDGECARD 50POS DIP .156 SLD |
| ESM12DRXI | CONN EDGECARD 24POS DIP .156 SLD |
| MAX1259EWE+ | IC BATTERY MANAGER 16-SOIC |
| M3BRK-2406J | IDC CABLE - MSR24K/MC24G/MPR24K |
| EMM10DRTS | CONN EDGECARD 20POS DIP .156 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX8725ETI+ | 功能描述:电池管理 Multichemistry Battery Charger RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| MAX8725ETI+T | 功能描述:电池管理 Multichemistry Battery Charger RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| MAX8725ETI-T | 功能描述:电池管理 RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| MAX8725EVKIT | 功能描述:电池管理 Evaluation Kit for the MAX8725 RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| MAX8726EUE | 功能描述:LCD 驱动器 RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。