参数资料
| 型号： | MAX8821EVKIT+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 6/14页 |
| 文件大小： | 0K |
| 描述： | KIT EVAL FOR MAX8821 |
| 其它有关文件： | Automotive Product Guide |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 1 |
| 主要目的： | 接口，串行器，解串器（串并行转换器） |
| 已用 IC / 零件： | MAX8821 |
| 已供物品： | 板 |
MAX8821 Evaluation Kit
34) Select LED2 to a ramp-up and ramp-down time of
524ms.
35) Select LED3 to a ramp-up and ramp-down time of
1048ms.
36) Select LED4 to a ramp-up and ramp-down time of
2097ms.
37) Enable LED1–LED4 by selecting the corresponding
Enable boxes.
38) Verify that D1–D4 emit white light and display a
sequenced ramp-up time with LED1 as the fastest
ramp-up time and LED4 as the slowest.
39) Enable the blink function for LED5 and LED6 by
selecting the corresponding Blink boxes.
40) Select LED5 to a blink ON time of 512ms and blink
OFF time of 512ms.
41) Select LED6 to a blink ON time of 66ms and blink
OFF time of 4194ms.
42) Enable LED5 and LED6 by selecting the corre-
sponding Enable boxes.
Table 1. Jumper Settings
43) Verify that D7 emits both red and blue light.
44) Verify that D7 emits the blue light for a longer time
than the red light.
45) Select the audio amplifier to have a +3dB gain.
46) Enable the audio amplifier by selecting the corre-
sponding Enable box.
47) Verify that sound is coming from the speaker.
48) Set the audio gain to +12dB and verify that the
volume has increased.
Power Down
When evaluation of the MAX8821 EV kit is completed, use
the following steps to power down the MAX8821 EV kit:
1) Turn off the power supply and audio source.
2) Disconnect the power supply, audio source, speak-
er, DMMs, and test leads from the MAX8821 EV kit.
3) Disconnect the MAX8821 EV kit from the
CMAXQUSB+ command module.
JUMPER
JU1
JU2
JU3
JU4
JU5
FUNCTION
Shorts VBATT+ (2.7V to 5.5V) to the anodes of all LEDs (D1 –D7). Short JU1 to connect all LEDs to the power
supply for normal operation. Open JU1 to disconnect all LEDs from the power supply.
Short JU2 to directly apply a common-mode audio signal (0.5V to V IN3 - 1.2V) to the IC ’s noninverting input. Open
JU2 to remove the DC bias from the audio input with the AC-coupling capacitor (C2).
Short JU3 to directly apply a common-mode audio signal (0.5V to V IN3 - 1.2V) to the IC ’s inverting input. Open JU3
to remove the DC bias from the audio input with the AC-coupling capacitor (C1).
Connect pins 1 and 2 of JU4 to apply a differential signal to AIN- . Connect pins 2 and 3 to connect AIN- to ground
to apply a single-ended audio signal to AIN+. ( Note: JU2 must be open when a single-ended audio signal is
applied to AIN+.)
Connect pins 2 and 3 to connect V DD (1.5V to 5.5V), the I 2 C power supply, to VBATT+ (2.7V to 5.5V). Connect pins
1 and 2 to connect V DD (1.5V to 5.5V) to the I 2 C interface supply voltage with J1.
Connect the center pin
Connect the center pin
current regulator.
of JU6 to the pin labeled W to connect a white LED (D5) to the internal current regulator.
of JU6 to the pin labeled R to connect the red LED in the RGB diode (D7) to the internal
JU6
JU7
Connect the center pin
current regulator.
Connect the center pin
current regulator.
Connect the center pin
Connect the center pin
current regulator.
Connect the center pin
current regulator.
Connect the center pin
current regulator.
of JU6 to the pin labeled B to connect the blue LED in the RGB diode (D7) to the internal
of JU6 to the pin labeled G to connect the green LED in the RGB diode (D7) to the internal
of JU7 to the pin labeled W to connect a white LED (D6) to the internal current regulator.
of JU7 to the pin labeled R to connect the red LED in the RGB diode (D7) to the internal
of JU7 to the pin labeled B to connect the blue LED in the RGB diode (D7) to the internal
of JU7 to the pin labeled G to connect the green LED in the RGB diode (D7) to the internal
6
_______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| MAX9235EVKIT+ | KIT EVAL FOR MAX9235 |
| MAX9258EVKIT+ | EVAL KIT FOR MAX9258 |
| MAX9390EVKIT+ | KIT EVAL FOR MAX9390 |
| MAX9392EVKIT+ | KIT EVAL FOR MAX9392 |
| MAX9507EVKIT+ | KIT EVAL FOR MAX9508 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX8821EVKIT+ | 功能描述:电源管理IC开发工具 MAX8821 Eval Kit RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| MAX8822ETE+ | 功能描述:LED照明驱动器 Negative Charge Pump LED Driver RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| MAX8822ETE+T | 功能描述:LED照明驱动器 Negative Charge Pump LED Driver RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| MAX882C/D | 功能描述:低压差稳压器 - LDO RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| MAX882C/D DIE | 制造商:Maxim Integrated Products 功能描述: |
发布紧急采购，3分钟左右您将得到回复。