参数资料
型号: MAX912ESE+T
厂商: Maxim Integrated Products
文件页数: 10/11页
文件大小: 0K
描述: IC COMPARATOR LP 16-SOIC
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 2,500
类型: 带锁销
元件数: 2
输出类型: 补充型,TTL
电压 - 电源,单路/双路(±): 5 V ~ 10 V
电压 - 输入偏移(最小值): 2mV @ ±5V
电流 - 输入偏压(最小值): 5µA @ ±5V
电流 - 输出(标准): 20mA
电流 - 静态(最大值): 10mA
CMRR, PSRR(标准): 110dB CMRR,100dB PSRR
传输延迟(最大): 14ns
工作温度: -40°C ~ 85°C
封装/外壳: 16-SOIC(0.154",3.90mm 宽)
安装类型: 表面贴装
包装: 带卷 (TR)
MAX912/MAX913
Applications Information
Power Supplies and Bypassing
The MAX912/MAX913 are tested with ±5V power sup-
plies that provide an input common-mode range (VCM)
of 8.7V (-5.2V to +3.5V). Operation from a single +5V
supply provides a common-mode input range of 3.7V
(-0.2V to +3.5). Connect V- to GND for single-supply
operation. The MAX912/MAX913 will operate from a
minimum single-supply voltage of +4.5V.
The V+ supply provides power to both the analog input
stage and digital output circuits, whereas the V- supply
only powers the analog section. Bypass V+ and V- to
ground with 0.1F to 1.0F ceramic capacitors in parallel
with 10F or greater tantalum capacitors. Connect the
ceramic capacitors very close to the MAX912/MAX913’s
supply pins, keeping leads short to minimize lead induc-
tance. For particularly noisy applications, use ferrite
beads on the power-supply lines.
Board Layout
As with all high-speed components, careful attention to
layout is essential for best performance.
1) Use a printed circuit board with an unbroken ground
plane.
2) Pay close attention to the bandwidth of bypass com-
ponents and keep leads short.
3) Avoid sockets; solder the comparator and other
components directly to the board to minimize
unwanted parasitic inductance and capacitance.
Input Slew Rate
The MAX912/MAX913 design eliminates the input slew-
rate requirement imposed on many standard compara-
tors. As long as LE is high after the maximum propaga-
tion delay and the input is greater than the
comparator’s total DC error, the output will be valid
without oscillations.
Maximum Clock (LE) and Signal Rate
The maximum clock and signal rate is 70MHz, based
on the comparator’s rise and fall time with a 5mV over-
drive at +25°C (Figure 1). With a 20mV overdrive, the
maximum propagation delay is 12ns and the clock sig-
nal rate is 85MHz.
Single/Dual, Ultra-Fast, Low-Power
Precision TTL Comparators
8
_______________________________________________________________________________________
Chip Information
MAX912 TRANSISTOR COUNT: 285
MAX913 TRANSISTOR COUNT: 154
PROCESS: Bipolar
IN+
IN-
Q
WITH HYSTERESIS
IDEAL (WITHOUT HYSTERESIS)
*WHEN HYSTERESIS IS ADDED, A COMPARATOR CANNOT RESOLVE ANY INPUT SIGNAL WITHIN THE HYSTERESIS BAND.
HYSTERESIS
BAND*
Figure 2. Effect of Hysteresis on Input Resolution
相关PDF资料
PDF描述
VI-J50-MY-F1 CONVERTER MOD DC/DC 5V 50W
MAX901BCSE+T IC COMPARATOR VOLT 16-SOIC
MAX9111EKA+T IC RCVR LVDS SGL SOT23-8
VE-JTL-MY-F4 CONVERTER MOD DC/DC 28V 50W
VE-JTL-MY-F3 CONVERTER MOD DC/DC 28V 50W
相关代理商/技术参数
参数描述
MAX912MJE 功能描述:校验器 IC RoHS:否 制造商:STMicroelectronics 产品: 比较器类型: 通道数量: 输出类型:Push-Pull 电源电压-最大:5.5 V 电源电压-最小:1.1 V 补偿电压(最大值):6 mV 电源电流(最大值):1350 nA 响应时间: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SC-70-5 封装:Reel
MAX913 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Single/Dual, Ultra-Fast, Low-Power, Precision TTL Comparators
MAX9130 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Single 500Mbps LVDS Line Receiver in SC70
MAX9130EXT 制造商:Maxim Integrated Products 功能描述:SINGLE 500MBPS LVDS LINE RECEIVER I - Cut Tape Product
MAX9130EXT+ 制造商:Maxim Integrated Products 功能描述:LINE RCVR 1RX 6PIN SC-70 - Rail/Tube