- 您现在的位置：买卖IC网 > PDF目录11621 > MAX9174EUB+ (Maxim Integrated Products)IC SPLITTER 1:2 LVDS 10-UMAX PDF资料下载
参数资料
| 型号： | MAX9174EUB+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 12/14页 |
| 文件大小： | 0K |
| 描述： | IC SPLITTER 1:2 LVDS 10-UMAX |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 50 |
| 类型： | 分线器 |
| Tx/Rx类型： | LVDS |
| 延迟时间： | 2.39ns |
| 电容 - 输入： | 4.5pF |
| 电源电压： | 3 V ~ 3.6 V |
| 电流 - 电源： | 25mA |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 10-TFSOP，10-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 10-µMAX |
| 包装： | 管件 |
| 产品目录页面： | 1424 (CN2011-ZH PDF) |
Detailed Description
The MAX9174/MAX9175 are 670MHz, low-jitter, low-
skew 1:2 splitters ideal for protection switching, loop-
back, and clock and signal distribution. The devices
feature ultra-low 80psP-P deterministic jitter (max) that
ensures reliable operation in high-speed links that are
highly sensitive to timing error.
The MAX9174 has a fail-safe LVDS input and LVDS out-
puts. The MAX9175 has an anything differential input
(CML/LVDS/LVPECL) and LVDS outputs. The outputs
can be put into high impedance using the power-down
inputs. The MAX9174 features a fail-safe circuit that dri-
ves the outputs high when the input is open, undriven
and shorted, or undriven and terminated. The MAX9175
has a bias circuit that forces the outputs high when the
input is open. The power-down inputs are compatible
with standard LVTTL/LVCMOS logic.
The power-down inputs tolerate undershoot of -1V and
overshoot of VCC + 1V. The MAX9174/MAX9175 are
available in 10-pin MAX and 10-lead thin QFN pack-
ages, and operate from a single +3.3V supply over the
-40°C to +85°C temperature range.
Current-Mode LVDS Outputs
The LVDS outputs use a current-steering configuration.
This approach results in less ground bounce and less
output ringing, enhancing noise margin and system
speed performance.
A differential output voltage is produced by steering
current through the parallel combination of the integrat-
ed differential output resistor and transmission line
impedance/termination resistor. When driving a 100
termination resistor, a differential voltage of 250mV to
475mV is produced. For loads greater than 100, the
output voltage is larger, and for loads less than 100,
the output voltage is smaller. See the Differential Output
Voltage vs. Load Resistance curve in Typical Operating
Characteristics for more information. The outputs are
short-circuit current limited for single-ended and differ-
ential shorts.
MAX9174 Input Fail-Safe
The fail-safe feature of the MAX9174 sets the outputs
high when the differential input is:
Open
Undriven and shorted
Undriven and terminated
Without a fail-safe circuit, when the input is undriven,
noise at the input may switch the outputs and it may
appear to the system that data is being sent. Open or
undriven terminated input conditions can occur when a
cable is disconnected or cut, or when a driver output is
in high impedance. A shorted input can occur because
of a cable failure.
MAX9174/MAX9175
670MHz LVDS-to-LVDS and Anything-to-LVDS
1:2 Splitters
_______________________________________________________________________________________
7
Pin Description
PIN
MAX
QFN
NAME
FUNCTION
11
IN+
Noninverting Differential Input
22
IN-
Inverting Differential Input
33
GND
Ground
44
PD1
LVTTL/LVCMOS Input. OUT1+, OUT1- are high impedance to ground when PD1 is low.
Internal pulldown resistor to GND.
55
PD0
LVTTL/LVCMOS Input. OUT0+, OUT0- are high impedance to ground when PD0 is low.
Internal pulldown resistor to GND.
66
OUT0-
Inverting LVDS Output 0
77
OUT0+
Noninverting LVDS Output 0
88
VCC
Power Supply
99
OUT1-
Inverting LVDS Output 1
10
OUT1+
Noninverting LVDS Output 1
—EP
Exposed
Pad
Exposed Pad. Solder to ground.
相关PDF资料 |
PDF描述 |
|---|---|
| VI-J6H-IY-F1 | CONVERTER MOD DC/DC 52V 50W |
| PIC16F610-E/ML | IC PIC MCU FLASH 1KX14 16QFN |
| VI-J6D-IZ-B1 | CONVERTER MOD DC/DC 85V 25W |
| VE-J6Z-IW-F3 | CONVERTER MOD DC/DC 2V 40W |
| ISL88694IH5Z-TK | IC ACCELERATOR SMBUS SOT23-5 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX9174EUB+ | 功能描述:LVDS 接口集成电路 670MHz LVDS-to-LVDS & X-LVDS 1:2 Split RoHS:否 制造商:Texas Instruments 激励器数量:4 接收机数量:4 数据速率:155.5 Mbps 工作电源电压:5 V 最大功率耗散:1025 mW 最大工作温度:+ 85 C 封装 / 箱体:SOIC-16 Narrow 封装:Reel |
| MAX9174EUB+T | 功能描述:LVDS 接口集成电路 670MHz LVDS-to-LVDS & X-LVDS 1:2 Split RoHS:否 制造商:Texas Instruments 激励器数量:4 接收机数量:4 数据速率:155.5 Mbps 工作电源电压:5 V 最大功率耗散:1025 mW 最大工作温度:+ 85 C 封装 / 箱体:SOIC-16 Narrow 封装:Reel |
| MAX9174EUB-T | 功能描述:缓冲器和线路驱动器 RoHS:否 制造商:Micrel 输入线路数量:1 输出线路数量:2 极性:Non-Inverting 电源电压-最大:+/- 5.5 V 电源电压-最小:+/- 2.37 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:MSOP-8 封装:Reel |
| MAX9175ETB | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:670MHz LVDS-to-LVDS and Anything-to-LVDS 1:2 Splitters |
| MAX9175EUB | 制造商:Maxim Integrated Products 功能描述:670MHZ LVDS-TO-LVDS AND ANYTHING -TO-LVDS 1:2 - Rail/Tube |
发布紧急采购，3分钟左右您将得到回复。