- 您现在的位置：买卖IC网 > PDF目录11669 > MAX9621AUB+ (Maxim Integrated Products)IC HALL EFFECT SENSOR 10UMAX PDF资料下载
参数资料
| 型号： | MAX9621AUB+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 3/15页 |
| 文件大小： | 0K |
| 描述： | IC HALL EFFECT SENSOR 10UMAX |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 50 |
| 类型： | 霍尔效应传感器 |
| 输入类型： | 逻辑 |
| 输出类型： | 模拟，数字 |
| 接口： | 2 线 |
| 电流 - 电源： | 1mA |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 10-TFSOP，10-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 10-µMAX |
| 包装： | 管件 |
11
Maxim Integrated
Dual, 2-Wire Hall-Effect Sensor Interface with
Analog and Digital Outputs
MAX9621
Sleep Mode Input (SLEEP)
The MAX9621 features an active-low SLEEP input. Pull
SLEEP low for more than 40Fs to put the device into
sleep mode for power saving. In sleep mode, the DOUT1
and DOUT2 outputs are high impedance and are pulled
high by pullup resistors. AOUT1 and AOUT2 are set to
zero-output current.
Hall Input Restart
When an input has been shut down due to a short to
ground, cycle SLEEP for 10Fs to 20Fs to restart the input.
If the other input is operational it is not affected. The
restart happens on the rising edge of SLEEP.
Input Current Thresholds and
Short to Ground
The input current high and low thresholds that determine
the logic level of the digital outputs are adjusted by
changing the RSET value. When the RSET value changes,
the following parameters change as well: IIN_HYS, ISC,
tBL, tRAMP, tDEL, fMAX, and PR.
IIH, IIL, IIN_HYS, ISC, tRAMP, and fMAX are inversely pro-
portional to RSET and decrease as RSET increases. This
inverse relationship is linear. For example, a 10% change in
(1/RSET) results in a 10% change in current parameters.
Conversely, time and delay parameters are linear and
directly proportional to RSET, and a 10% change in RSET
results in an 10% change in time parameters.
The difference between the maximum and minimum
threshold current limits is the min/max limit spread, which
is greater than the threshold hysteresis. The min/max
spread and the hysteresis both change by the same per-
centage as the mean of the threshold current limits. The
following equation is useful for finding the mean of the
threshold current limits given a value of RSET resistance:
(
)
0
1
II
I 0
Rm
=
+<
×
I is the mean of the threshold current limits, R is
the value of the RSET resistance in kΩ, the constant
I0 = 0.03717mA, and the constant m = -0.001668
(1/(kΩ x mA)).
The following equation is useful for finding the value of
RSET resistance given a mean of the threshold current
limits:
(
)
0
Y Y
m II 0
1
R
Y
=
+
×
<
=
Y0 = 6.2013 x 10-5 units of (1/kΩ)
To compute the typical input current thresholds from the
mean input current, it is necessary to obtain the hyster-
esis. The following equation finds the hysteresis given
the mean threshold current, I:
H = H0 + k x I (I < 0)
where H0 = -0.033463 in mA, and k = -0.08414 in mA/mA.
Input current threshold high = I - H/2, input current
threshold low = I + H/2.
Application Information
Use of Digital and Analog Outputs
The digital output can be used to provide the FP with an
interrupt signal that can represent a Hall sensor change
of status. DOUT1 and DOUT2 provide a time domain
output filter for robust noise immunity. See Figure 2.
The analog output can be connected to an ADC with an
appropriate load resistor, and can be used to perform
custom diagnostics.
Figure 4. Hall Input Reenergized When Open Input Is Reconnected to Hall Sensor
14V
VIN_
8V
5mA/
s
HALL INPUT RECONNECTED
TO HALL SENSOR
11.5mA
IIN_
0V
0A
TIME
VBAT - 500mV
VBAT - 25mV
相关PDF资料 |
PDF描述 |
|---|---|
| VI-J40-IW-F1 | CONVERTER MOD DC/DC 5V 100W |
| AD2S82ALPZ | IC CONV R/D MONO VAR RES 44PLCC |
| VI-J40-IW-F2 | CONVERTER MOD DC/DC 5V 100W |
| 638831-3 | CONN JACK SMB FAKRA BLUE |
| 1-2081205-3 | CONN JACK SMA CRIMP .047" S/R |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX9621AUB/V+ | 功能描述:板机接口霍耳效应/磁性传感器 Dual 2-Wire Hall-Effect Sensor Interface with Analog and Digital Outputs RoHS:否 制造商:Honeywell 类型:Bipolar Hall-Effect Digital Position Sensor 工作电源电压:3 V to 24 V 电源电流:3.5 mA 最大输出电流:20 mA 工作点最小值/最大值:5 G, 55 G 最小/最大释放点（Brp）:- 55 G, - 5 G 最大工作温度:+ 150 C 安装风格:SMD/SMT 封装 / 箱体:SOT-23 |
| MAX9621AUB/V+T | 功能描述:板机接口霍耳效应/磁性传感器 Dual 2-Wire Hall-Effect Sensor Interface with Analog and Digital Outputs RoHS:否 制造商:Honeywell 类型:Bipolar Hall-Effect Digital Position Sensor 工作电源电压:3 V to 24 V 电源电流:3.5 mA 最大输出电流:20 mA 工作点最小值/最大值:5 G, 55 G 最小/最大释放点（Brp）:- 55 G, - 5 G 最大工作温度:+ 150 C 安装风格:SMD/SMT 封装 / 箱体:SOT-23 |
| MAX9621AUB+ | 功能描述:板机接口霍耳效应/磁性传感器 Hall Sensor Interface RoHS:否 制造商:Honeywell 类型:Bipolar Hall-Effect Digital Position Sensor 工作电源电压:3 V to 24 V 电源电流:3.5 mA 最大输出电流:20 mA 工作点最小值/最大值:5 G, 55 G 最小/最大释放点（Brp）:- 55 G, - 5 G 最大工作温度:+ 150 C 安装风格:SMD/SMT 封装 / 箱体:SOT-23 |
| MAX9621AUB+T | 功能描述:板机接口霍耳效应/磁性传感器 Hall Sensor Interface RoHS:否 制造商:Honeywell 类型:Bipolar Hall-Effect Digital Position Sensor 工作电源电压:3 V to 24 V 电源电流:3.5 mA 最大输出电流:20 mA 工作点最小值/最大值:5 G, 55 G 最小/最大释放点（Brp）:- 55 G, - 5 G 最大工作温度:+ 150 C 安装风格:SMD/SMT 封装 / 箱体:SOT-23 |
| MAX9621EVKIT+ | 功能描述:板机接口霍耳效应/磁性传感器 Hall Sensor Interface RoHS:否 制造商:Honeywell 类型:Bipolar Hall-Effect Digital Position Sensor 工作电源电压:3 V to 24 V 电源电流:3.5 mA 最大输出电流:20 mA 工作点最小值/最大值:5 G, 55 G 最小/最大释放点（Brp）:- 55 G, - 5 G 最大工作温度:+ 150 C 安装风格:SMD/SMT 封装 / 箱体:SOT-23 |
发布紧急采购，3分钟左右您将得到回复。