参数资料
型号: MB90423GAPMC
厂商: FUJITSU LTD
元件分类: 微控制器/微处理器
英文描述: 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP100
封装: 14 X 14 MM, 1.70 MM HEIGHT, 0.50 MM PITCH, PLASTIC, LQFP-100
文件页数: 12/88页
文件大小: 1991K
代理商: MB90423GAPMC
MB90420G/425G Series
2
DS07-13711-5E
16-bit PPG (3 channels)
Output pins (3) , external trigger input pin (1)
Output clock frequencies : fCP, fCP/22, fCP/24, fCP/26
Delay interrupt
Generates interrupt for task switching.
Interruptions to CPU can be generated/deleted by software setting.
External interrupts (8 channels)
8-channel independent operation
Interrupt source setting available : “L” to “H” edge/ “H” to “L” edge/ “L” level/ “H” level.
A/D converter
10-bit or 8-bit resolution
× 8 channels (input multiplexed)
Conversion time : 6.13
s or less (at fCP = 16 MHz)
External trigger startup available (P50/INT0/ADTG)
Internal timer startup available (16-bit reload timer 1)
UART (2 channels)
Full duplex double buffer type
Supports asynchronous/synchronous transfer (with start/stop bits)
Internal timer can be selected as clock (16-bit reload timer 0)
Asynchronous : 4808 bps, 5208 bps, 9615 bps, 10417 bps, 19230 bps, 38460 bps, 62500 bps, 500000 bps
Synchronous : 500 Kbps, 1Mbps, 2Mbps (at fCP
= 16 MHz)
CAN interface *1
Conforms to CAN specifications version 2.0 Part A and B.
Automatic resend in case of error.
Automatic transfer in response to remote frame.
16 prioritized message buffers for data and messages for data and ID
Multiple message support
Receiving filter has flexible configuration : All bit compare/all bit mask/two partial bit masks
Supports up to 1 Mbps
CAN WAKEUP function (connects RX internally to INT0)
LCD controller/driver (1 channel)
Segment driver and command driver with direct LCD panel (display) drive capability
Low voltage/Program Looping detect reset *2
Automatic reset when low voltage is detected
Program Looping detection function
Stepping motor controller (4 channels)
High current output for all channels
× 4
Synchronized 8/10-bit PWM for all channels
× 2
Sound generator
8-bit PWM signal mixed with tone frequency from 8-bit reload counter.
PWM frequencies : 62.5 kHz, 31.2 kHz, 15.6 kHz, 7.8 kHz (at fCP
= 16MHz)
Tone frequencies : 1/2 PWM frequency, divided by (reload frequency
+1)
Input/output ports
Push-pull output and Schmitt trigger input
Programmable in bit units for input/output or peripheral signals.
(Continued)
相关PDF资料
PDF描述
M37272M6-XXXFP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDSO42
M38223M4MXXXHP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP80
M38227MCHXXXFP 8-BIT, MROM, 4 MHz, MICROCONTROLLER, PQFP80
M38869FFAHP 8-BIT, FLASH, 5 MHz, MICROCONTROLLER, PQFP80
MSP430F5419AIPZ 16-BIT, FLASH, 25 MHz, RISC MICROCONTROLLER, PQFP100
相关代理商/技术参数
参数描述
MB90423GC 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:16-Bit Original Microcontroller
MB90423GCPF 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:16-Bit Original Microcontroller
MB90423GCPFV 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:16-Bit Original Microcontroller
MB90423GCPMC 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:16-Bit Original Microcontroller
MB90423GPF 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:16-Bit Original Microcontroller