参数资料
型号: MB90F342CEPMC
厂商: FUJITSU LTD
元件分类: 微控制器/微处理器
英文描述: 16-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP100
封装: 14 X 14 MM, 1.70 MM HEIGHT, 0.50 MM PITCH, PLASTIC, LQFP-100
文件页数: 5/92页
文件大小: 2532K
代理商: MB90F342CEPMC
MB90340E Series
DS07-13747-4E
13
■ PIN DESCRIPTION
(Continued)
Pin No.
Pin name
I/O
Circuit
type*3
Function
QFP100*1 LQFP100*2
1 to 4
99 to 2
P24 to P27
G
General purpose I/O pins. The register can be set to select
whether to use a pull-up resistor.In external bus mode, the pin is
enabled as a general-purpose I/O port when the corresponding bit
in the external address output control register (HACR) is 1.
A20 to A23
Output pins of the external address bus. When the corresponding
bit in the external address output control register (HACR) is 0, the
pins are enabled as high address output pins (A20 to A23).
IN0 to IN3
Trigger input pins for input captures.
53
P30
G
General purpose I/O pin.The register can be set to select whether
to use a pull-up resistor.
This function is enabled in single-chip mode.
ALE
Address latch enable output pin. This function is enabled when
the external bus is enabled.
IN4
Trigger input pin for input capture.
64
P31
G
General purpose I/O pin.The register can be set to select whether
to use a pull-up resistor.
This function is enabled in single-chip mode.
RD
External read strobe output pin. This function is enabled when the
external bus is enabled.
IN5
Trigger input pin for input capture.
75
P32
G
General purpose I/O pin. The register can be set to select whether
to use a pull-up resistor. This function is enabled either in single-
chip mode or when the WR/WRL pin output is disabled.
WR / WRL
Write strobe output pin for the external data bus. This function is
enabled when both the external bus and the WR/WRL pin output
are enabled. WRL is used to write-strobe 8 lower bits of the data
bus in 16-bit access while WR is used to write-strobe 8 bits of the
data bus in 8-bit access.
INT10R
External interrupt request input pin.
86
P33
G
General purpose I/O pin. The register can be set to select whether
to use a pull-up resistor.This function is enabled either in single-
chip mode or when the WRH pin output is disabled.
WRH
Write strobe output pin for the upper 8 bits of the external data
bus. This function is enabled when the external bus is enabled,
when the external bus 16-bit mode is selected, and when the
WRH output pin is enabled.
相关PDF资料
PDF描述
MB90F346CESPMC 16-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP100
MB90F349CESPMC 16-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP100
MB90F346EPMC 16-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP100
MB90F367ESPMT MICROCONTROLLER, PQFP48
MB90F367TEPMT MICROCONTROLLER, PQFP48
相关代理商/技术参数
参数描述
MB90F342CESPQC-GSE2 功能描述:IC MCU FLASH 256K ROM 100QFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:F²MC MB90340E 产品培训模块:MCU Product Line Introduction XMEGA Introduction AVR XMEGA USB Connectivity 标准包装:90 系列:AVR® XMEGA 核心处理器:AVR 芯体尺寸:8/16-位 速度:32MHz 连通性:I²C,IrDA,SPI,UART/USART 外围设备:欠压检测/复位,DMA,POR,PWM,WDT 输入/输出数:50 程序存储器容量:192KB(96K x 16) 程序存储器类型:闪存 EEPROM 大小:4K x 8 RAM 容量:16K x 8 电压 - 电源 (Vcc/Vdd):1.6 V ~ 3.6 V 数据转换器:A/D 16x12b; D/A 2x12b 振荡器型:内部 工作温度:-40°C ~ 85°C 封装/外壳:64-TQFP 包装:托盘 配用:ATSTK600-RC14-ND - STK600 SOCKET/ADAPTER 64TQFPATSTK600-TQFP64-ND - STK600 SOCKET/ADAPTER 64-TQFPATAVRONEKIT-ND - KIT AVR/AVR32 DEBUGGER/PROGRMMRATAVRISP2-ND - PROGRAMMER AVR IN SYSTEM
MB90F345CAPFR-GSE1 制造商:FUJITSU 功能描述:
MB90F345CAPFR-GS-SPE1 制造商:FUJITSU 功能描述:
MB90F345CAPMC-GSE1 制造商:FUJITSU 功能描述:
MB90F345CASPF-GSE1 制造商:FUJITSU 功能描述:IC 16BIT MCU CAN 5V SMD QFP100