参数资料
型号: MB90F367TSPMT
元件分类: 微控制器/微处理器
英文描述: 16-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP48
封装: PLASTIC, LQFP-48
文件页数: 7/59页
文件大小: 623K
代理商: MB90F367TSPMT
MB90360 Series
15
10. Connection of unused pins of A/D converter if A/D converter is used
Connect unused pins of A/D converter to AVCC
= VCC, AVSS = AVR = VSS.
11. Notes on energization
To prevent the internal regulator circuit from malfunctioning, set the voltage rise time during energization at
50
s or more (0.2 V to 2.7 V)
12. Stabilization of power supply voltage
A sudden change in the power supply voltage may cause the device to malfunction even within the specified
VCC power supply voltage operating guarantee range. Therefore, the VCC power supply voltage should be stabi-
lized.
For reference, the power supply voltage should be controlled so that VCC ripple variations (peak-to-peak value)
at commercial frequencies (50 Hz to 60 Hz) fall below 10
% of the standard VCC power supply voltage and the
coefficient of transient fluctuation does not exceed 0.1 V/ms at instantaneous power switching.
13. Initialization
In the device, there are internal registers which are initialized only by a power-on reset. To initialize these registers,
turn on the power again.
14. Notes on using CAN function
To use CAN function, please set ’1’ to DIRECT bit of CAN direct mode register (CDMR) .
If DIRECT bit is set to ’0’ (initial value) , wait states will be performed when accessing CAN registers.
Note : Please refer to Hardware Manual of MB90360 series for detail of CAN Direct Mode Register.
15. Flash security function
The security bit is located in the area of the flash memory.
If protection code 01H is written in the security bit, the flash memory is in the protected state by security.
Therefore, please do not write 01H in this address if you do not use the security function.
Please refer to following table for the address of the security bit.
16. Correspondence with
+105 °C or more
If used exceeding TA
= +105 °C, please contact Fujitsu for reliability limitations.
Flash memory size
Address for security bit
MB90F362
MB90F362S
MB90F362T
MB90F362TS
MB90F367
MB90F367S
MB90F367T
MB90F367TS
Embedded 512 Kbit Flash Memory
FF0001H
相关PDF资料
PDF描述
MB90367SPMT 16-BIT, MROM, 24 MHz, MICROCONTROLLER, PQFP48
MB90F362TPMT 16-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP48
MB90362PMT 16-BIT, MROM, 24 MHz, MICROCONTROLLER, PQFP48
MB90362TSPMT 16-BIT, MROM, 24 MHz, MICROCONTROLLER, PQFP48
MB90F362SPMT 16-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP48
相关代理商/技术参数
参数描述
MB90F387PMCR-GSE1 制造商:FUJITSU 功能描述:
MB90F387PMT-GSE1 功能描述:IC MCU FLASH 64K ROM 48LQFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:F²MC MB90385 产品培训模块:MCU Product Line Introduction XMEGA Introduction AVR XMEGA USB Connectivity 标准包装:90 系列:AVR® XMEGA 核心处理器:AVR 芯体尺寸:8/16-位 速度:32MHz 连通性:I²C,IrDA,SPI,UART/USART 外围设备:欠压检测/复位,DMA,POR,PWM,WDT 输入/输出数:50 程序存储器容量:192KB(96K x 16) 程序存储器类型:闪存 EEPROM 大小:4K x 8 RAM 容量:16K x 8 电压 - 电源 (Vcc/Vdd):1.6 V ~ 3.6 V 数据转换器:A/D 16x12b; D/A 2x12b 振荡器型:内部 工作温度:-40°C ~ 85°C 封装/外壳:64-TQFP 包装:托盘 配用:ATSTK600-RC14-ND - STK600 SOCKET/ADAPTER 64TQFPATSTK600-TQFP64-ND - STK600 SOCKET/ADAPTER 64-TQFPATAVRONEKIT-ND - KIT AVR/AVR32 DEBUGGER/PROGRMMRATAVRISP2-ND - PROGRAMMER AVR IN SYSTEM
MB90F387SPMCR-GE1 制造商:FUJITSU 功能描述:
MB90F387SPMCR-G-JNE1 制造商:FUJITSU 功能描述:
MB90F387SPMCRGSE1 制造商:FUJITSU 功能描述:Pb Free