参数资料
型号: MB90F548PF
厂商: FUJITSU LTD
元件分类: 微控制器/微处理器
英文描述: 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP100
封装: PLASTIC, QFP-100
文件页数: 6/73页
文件大小: 1663K
代理商: MB90F548PF
MB90540/545 Series
14
s HANDLING DEVICES
(1) Preventing latch-up
CMOS IC chips may suffer latch-up under the following conditions:
A voltage higher than Vcc or lower than Vss is applied to an input or output pin.
A voltage higher than the rated voltage is applied between Vcc and Vss.
The AVcc power supply is applied before the Vcc voltage.
Latch-up may increase the power supply current drastically, causing thermal damage to the device.
(2) Handling unused input pins
Do not leave unused input pins open, as doing so may cause misoperation of the device. Use a pull-up or pull-
down resistor.
(3) Using external clock
To use external clock, drive the X0 and X1 pins in reverse phase.
Below is a diagram of how to use external clock.
Using external clock
(4) Power supply pins (Vcc/Vss)
Ensure that all Vcc-level power supply pins are at the same potential. In addition, ensure the same for all Vss-
level power supply pins. (See the figure below.) If there are more than one Vcc or Vss system, the device may
operate incorrectly even within the guaranteed operating range.
(5) Pull-up/down resistors
The MB90540/545 Series does not support internal pull-up/down resistors(except Port0 - Port3:pull-up resistors).
Use external components where needed.
X0
X1
MB90540/545 Series
Vcc
Vss
Vcc
Vss
Vcc
MB90540/545
Series
Vcc
Vss
Vcc
Vss
相关PDF资料
PDF描述
MSU2031C16U 8-BIT, 16 MHz, MICROCONTROLLER, PQFP44
M48T212V-85MH1 0 TIMER(S), REAL TIME CLOCK, PDSO44
M8813F1W-15K1T 128K X 8 FLASH, 27 I/O, PIA-GENERAL PURPOSE, PQCC52
M38067E6-FP 8-BIT, OTPROM, MICROCONTROLLER, PQFP80
M30620MCM-XXXGP 16-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP100
相关代理商/技术参数
参数描述
MB90F549PFR-GE1 制造商:FUJITSU 功能描述:
MB90F562BPMC-GE1 制造商:FUJITSU 功能描述:
MB90F562PMCR-GE1 制造商:FUJITSU 功能描述:
MB90F568PMCR-GE1 制造商:FUJITSU 功能描述:
MB90F583BPFR-GE1 制造商:FUJITSU 功能描述: