参数资料
型号: MB91F482PMC-GE1
厂商: Fujitsu Semiconductor America Inc
文件页数: 92/94页
文件大小: 0K
描述: IC MCU 256KB FLASH 100-LQFP
标准包装: 1
系列: FR MB91480
核心处理器: FR60 RISC
芯体尺寸: 32-位
速度: 80MHz
连通性: I²C,FIFO,SIO
外围设备: DMA,PWM,WDT
输入/输出数: 77
程序存储器容量: 256KB(256K x 8)
程序存储器类型: 闪存
RAM 容量: 16K x 8
电压 - 电源 (Vcc/Vdd): 4 V ~ 5.5 V
数据转换器: A/D 14x8/10b
振荡器型: 外部
工作温度: -40°C ~ 85°C
封装/外壳: 100-LQFP
包装: 托盘
其它名称: 865-1097
94
32015G–AVR32–09/09
AT32AP7001
99. The oscillator has a rather long start-up time of 32768 clock cycles, and no clocks will be
generated in the device during this start-up time.
Note that in static sleep mode the startup counter will start at the negedge of reset and not at the
posedge.
Pulling OSCEN_N high will also disable the 32 KHz oscillator, and a 32 KHz clock must be
applied on the XIN32 pin. No start-up time applies to this clock.
11.5.3
PLL operation
The device contains two PLL’s, PLL0 and PLL1. These are disabled by default, but can be
enabled to provide high frequency source clocks for synchronous or generic clocks. The PLL’s
can take either Oscillator 0 or 1 as clock source. Each PLL has an input divider, which divides
the source clock, creating the reference clock for the PLL. The PLL output is divided by a user-
defined factor, and the PLL compares the resulting clock to the reference clock. The PLL will
adjust its output frequency until the two compared clocks are equal, thus locking the output fre-
quency to a multiple of the reference clock frequency.
When the PLL is switched on, or when changing the clock source or multiplication or division
factor for the PLL, the PLL is unlocked and the output frequency is undefined. The PLL clock for
the digital logic is automatically masked when the PLL is unlocked, to prevent connected digital
logic from receiving a too high frequency and thus become unstable.
相关PDF资料
PDF描述
ADUC7036CCPZ-RL IC MCU 96K FLASH DUAL 48LFCSP
VI-J30-IW-F2 CONVERTER MOD DC/DC 5V 100W
ADUC7036DCPZ-RL IC MCU 96K FLASH DUAL 48LFCSP
ADUC7036BCPZ-RL IC SENSOR AUTO 96K FLASH 48LFCSP
ADUC7019BCPZ62IRL7 IC MCU 12BIT 1MSPS I2C 40-LFCSP
相关代理商/技术参数
参数描述
MB91F487 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:32-bit Microcontrollers
MB91F487PMC-GE1 功能描述:IC MCU 512KB FLASH 100-LQFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:FR MB91480 标准包装:38 系列:Encore!® XP® 核心处理器:eZ8 芯体尺寸:8-位 速度:5MHz 连通性:IrDA,UART/USART 外围设备:欠压检测/复位,LED,POR,PWM,WDT 输入/输出数:16 程序存储器容量:4KB(4K x 8) 程序存储器类型:闪存 EEPROM 大小:- RAM 容量:1K x 8 电压 - 电源 (Vcc/Vdd):2.7 V ~ 3.6 V 数据转换器:- 振荡器型:内部 工作温度:-40°C ~ 105°C 封装/外壳:20-SOIC(0.295",7.50mm 宽) 包装:管件 其它名称:269-4116Z8F0413SH005EG-ND
MB91F492PMC-GE1 功能描述:IC MCU 256KB FLASH FR60 LFQFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:FR MB91490 产品培训模块:The Ultra-Low Power MSP430 MSP430 Overview MSP430 Design Tools MSP430 Peripherals MSP430x2xx/4xx and Wireless Overview Portable Medical Solutions with MSP430 MSP430 for Utility Metering Solutions MSP430: How to JTAG MSP430, How To Use the Clock System Grace Software Graphical User Interface MCU Overview Driver Library MSP430Ware Overview 标准包装:1 系列:MSP430x4xx 核心处理器:RISC 芯体尺寸:16-位 速度:8MHz 连通性:SPI,UART/USART 外围设备:欠压检测/复位,LCD,POR,PWM,WDT 输入/输出数:48 程序存储器容量:32KB(32K x 8 + 256B) 程序存储器类型:闪存 EEPROM 大小:- RAM 容量:1K x 8 电压 - 电源 (Vcc/Vdd):1.8 V ~ 3.6 V 数据转换器:A/D 8x12b 振荡器型:内部 工作温度:-40°C ~ 85°C 封装/外壳:100-LQFP 包装:Digi-Reel® 其它名称:296-26232-6
MB91F585 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:32-bit Motor Control MCU for Electric (EV) and Hybrid Electric Vehicles (HEV)
MB91F587 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:32-bit Motor Control MCU for Electric (EV) and Hybrid Electric Vehicles (HEV)