参数资料
型号: MB95F106ANWPFV
元件分类: 微控制器/微处理器
英文描述: 8-BIT, FLASH, 16.25 MHz, MICROCONTROLLER, PQFP64
封装: 10 X 10 MM, 1.70 MM HEIGHT, 0.50 MM PITCH, PLASTIC, LQFP-64
文件页数: 45/72页
文件大小: 1851K
代理商: MB95F106ANWPFV
MB95100AM Series
DS07-12614-3E
5
(Continued)
Part number
Parameter
MB95
108AM
MB95F
104AMS/
MB95F
106AMS/
MB95F
108AMS
MB95F
104ANS/
MB95F
106ANS/
MB95F
108ANS
MB95F
104AMW/
MB95F
106AMW/
MB95F
108AMW
MB95F
104ANW/
MB95F
106ANW/
MB95F
108ANW
MB95F
104AJS/
MB95F
106AJS/
MB95F
108AJS
MB95F
104AJW/
MB95F
106AJW/
MB95F
108AJW
LIN-UART
Dedicated reload timer allowing a wide range of communication speeds to be set.
Full duplex double buffer
Clock asynchronous (UART) or clock synchronous (SIO) serial data transfer capa-
ble
LIN functions available as the LIN master or LIN slave.
8/10-bit A/D converter
(12 channels)
8-bit or 10-bit resolution can be selected.
16-bit reload timer
Two clock modes and two counter operating modes can be selected. Square wave-
form output
Count clock : 7 internal clocks and external clock can be selected.
Counter operating mode : reload mode or one-shot mode can be selected.
8/16-bit compound
timer (2 channels)
Each channel of the timer can be used as “8-bit timer
× 2 channels” or “16-bit timer
× 1 channel”.
Built-in timer function, PWC function, PWM function, capture function, and square
waveform output
Count clock : 7 internal clocks and external clock can be selected
16-bit PPG
(2 channels)
PWM mode or one-shot mode can be selected.
Counter operating clock : 8 selectable clock sources
Support for external trigger start
8/16-bit PPG
(2 channels)
Each channel of the PPG can be used as 8-bit PPG
× 2 channelsor 16-bit PPG ×
1 channel.
Counter operating clock : Eight selectable clock sources
Watch counter
(for dual clock product)
Count clock : 4 selectable clock sources (125 ms, 250 ms, 500 ms, or 1 s)
Counter value can be set from 0 to 63. (Capable of counting for 1 minute when
selecting clock source 1 second and setting counter value to 60)
Watch prescaler
(for dual clock product)
4 selectable interval times (125 ms, 250 ms, 500 ms, or 1 s)
External interrupt
(12 channels)
Interrupt by edge detection (rising, falling, or both edges can be selected.)
Can be used to recover from standby modes.
Flash memory
Supports automatic programming, Embedded Algorithm
Write/Erase/Erase-Suspend/Resume commands
A flag indicating completion of the algorithm
Number of write/erase cycles (Minimum) : 10000 times
Data retention time : 20 years
Erase can be performed on each block
Block protection with external programming voltage
Flash Security Feature for protecting the content of the Flash
(MB95F108AMS/F108ANS/F108AJS/F108AMW/F108ANW/F108AJW only)
Standby mode
Sleep, stop, watch (for dual clock product) , and timebase timer
Peripheral
functions
相关PDF资料
PDF描述
MC68HC705P6ACDWER2 8-BIT, OTPROM, 2.1 MHz, MICROCONTROLLER, PDSO28
M38022M2-XXXFP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP64
MB90346ESPMC 16-BIT, MROM, 24 MHz, MICROCONTROLLER, PQFP100
M38037M6-XXXHP 8-BIT, MROM, 8.4 MHz, MICROCONTROLLER, PQFP64
M37540M4-XXXSP 8-BIT, MROM, 6 MHz, MICROCONTROLLER, PDIP32
相关代理商/技术参数
参数描述
MB95F106JSPFM-GE1 制造商:FUJITSU 功能描述:8BIT MCU 32K FLASH 1K RAM QFP64
MB95F108AHWPMC1-GSE2 制造商:FUJITSU 功能描述:
MB95F108AHWPMC1-G-SPE1 制造商:FUJITSU 功能描述:
MB95F108AHWPMC1-GS-SPE2 制造商:FUJITSU 功能描述:
MB95F108AJS 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:8-bit Proprietary Microcontrollers