参数资料
型号: MB9AF116NPMC
厂商: FUJITSU LTD
元件分类: 微控制器/微处理器
英文描述: 32-BIT, FLASH, RISC MICROCONTROLLER, PQFP100
封装: 14 X 14 MM, 1.70 MM HEIGHT, 0.50 MM PITCH, PLASTIC, LQFP-100
文件页数: 54/108页
文件大小: 1221K
代理商: MB9AF116NPMC
MB9A110 Series
Watch Counter
The Watch counter is used for wake up from power saving mode.
· Interval timer: up to 64s(Max.)@ Sub Clock : 32.768kHz
External Interrupt Controller Unit
· Up to 16 external vectors
· Include one non-maskable interrupt(NMI)
Watch dog Timer (2channels)
A watchdog timer can generate interrupts or a reset when a time-out value is reached.
This series consists of two different watchdogs, a "Hardware" watchdog and a "Software" watchdog.
"Hardware" watchdog timer is clocked by low speed CR oscillator. Therefore,”Hardware" watchdog is
active in any power saving mode except STOP.
CRC (Cyclic Redundancy Check) Accelerator
The CRC accelerator helps a verify data transmission or storage integrity.
CCITT CRC16 and IEEE-802.3 CRC32 are supported.
· CCITT CRC16 Generator Polynomial: 0x1021
· IEEE-802.3 CRC32 Generator Polynomial: 0x04C11DB7
Clock and Reset
[Clocks]
Five clock sources (2 ext. osc, 2 CR osc, and PLL) that are dynamically selectable.
· Main Clock
: 4 to 48MHz
· Sub Clock
: 32.768kHz
· High-speed CR Clock : 4MHz
· Low-speed CR Clock : 100kHz
· PLL Clock
[Resets]
Reset requests from INITX pins, Power on reset, Software reset, watchdog timers reset, low voltage
detector reset and clock supervisor reset.
Clock Super Visor (CSV)
Clocks generated by CR oscillators are used to supervise abnormality of the external clocks.
· External OSC clock failure (clock stop) is detected, reset is asserted.
· External OSC frequency anomaly is detected, interrupt or reset is asserted.
Low Voltage Detector (LVD)
This Series include 2-stage monitoring of voltage on the VCC. When the voltage falls below the voltage has
been set, Low Voltage Detector generates an interrupt or reset.
· LVD1: error reporting via interrupt
· LVD2: auto-reset operation
5
FUJITSU SEMICONDUCTOR CONFIDENTIAL
r1.0
DS706-00011-0v01-E
相关PDF资料
PDF描述
MB9AF315MPMC RISC MICROCONTROLLER, PQFP80
MC56F8256MLF 16-BIT, FLASH, 60 MHz, MICROCONTROLLER, PQFP48
MB95F563HPF-G-JNE2 8-BIT, FLASH, 16.25 MHz, MICROCONTROLLER, PDSO20
MB95F563KWQN-G-JNE1 8-BIT, FLASH, 16.25 MHz, MICROCONTROLLER, PQCC32
MB9BF405RAPMC 32-BIT, FLASH, 80 MHz, RISC MICROCONTROLLER, PQFP120
相关代理商/技术参数
参数描述
MB9AF132KAPMC-G-SNE2 制造商:Fujitsu 功能描述:Bulk
MB9AF132KBPMC-G-SNE2 功能描述:IC MCU 32BIT 128KB FLASH 48LQFP 制造商:cypress semiconductor corp 系列:FM3 MB9A130LB 包装:托盘 零件状态:在售 核心处理器:ARM? Cortex?-M3 核心尺寸:32-位 速度:20MHz 连接性:CSIO,I2C,UART/USART 外设:LVD,POR,PWM,WDT I/O 数:37 程序存储容量:128KB(128K x 8) 程序存储器类型:闪存 EEPROM 容量:- RAM 容量:8K x 8 电压 - 电源(Vcc/Vdd):1.8 V ~ 5.5 V 数据转换器:A/D 6x12b 振荡器类型:内部 工作温度:-40°C ~ 85°C(TA) 封装/外壳:48-LQFP 供应商器件封装:48-LQFP(7x7) 标准包装:250
MB9AF132KBQN-G-AVE2 功能描述:ARM? Cortex?-M3 FM3 MB9A130LB Microcontroller IC 32-Bit 20MHz 128KB (128K x 8) FLASH 48-QFN (7x7) 制造商:cypress semiconductor corp 系列:FM3 MB9A130LB 包装:托盘 零件状态:有效 核心处理器:ARM? Cortex?-M3 核心尺寸:32-位 速度:20MHz 连接性:CSIO,I2C,UART/USART 外设:LVD,POR,PWM,WDT I/O 数:37 程序存储容量:128KB(128K x 8) 程序存储器类型:闪存 EEPROM 容量:- RAM 容量:8K x 8 电压 - 电源(Vcc/Vdd):1.8 V ~ 5.5 V 数据转换器:A/D 6x12b 振荡器类型:内部 工作温度:-40°C ~ 85°C(TA) 封装/外壳:48-VFQFN 裸露焊盘 供应商器件封装:48-QFN(7x7) 标准包装:260
MB9AF132KQN-G-AWE2 制造商:FUJITSU 功能描述:
MB9AF132LAPMC1-G-SNE2 制造商:FUJITSU 功能描述: 制造商:Fujitsu 功能描述:Bulk