参数资料
型号: MB9AF315MPMC
元件分类: 微控制器/微处理器
英文描述: 32-BIT, FLASH, 40 MHz, RISC MICROCONTROLLER, PQFP80
封装: 0.50 MM PITCH, PLASTIC, LQFP-80
文件页数: 109/114页
文件大小: 1357K
代理商: MB9AF315MPMC
ATmega48PA/88PA/168PA [DATASHEET]
9223F–AVR–04/14
94
15.9.2 TCCR0B – Timer/Counter Control Register B
Bit 7 – FOC0A: Force Output Compare A
The FOC0A bit is only active when the WGM bits specify a non-PWM mode.
However, for ensuring compatibility with future devices, this bit must be set to zero when TCCR0B is written when operating
in PWM mode. When writing a logical one to the FOC0A bit, an immediate compare match is forced on the waveform
generation unit. The OC0A output is changed according to its COM0A1:0 bits setting. Note that the FOC0A bit is
implemented as a strobe. Therefore it is the value present in the COM0A1:0 bits that determines the effect of the forced
compare.
A FOC0A strobe will not generate any interrupt, nor will it clear the timer in CTC mode using OCR0A as TOP.
The FOC0A bit is always read as zero.
Bit 6 – FOC0B: Force Output Compare B
The FOC0B bit is only active when the WGM bits specify a non-PWM mode.
However, for ensuring compatibility with future devices, this bit must be set to zero when TCCR0B is written when operating
in PWM mode. When writing a logical one to the FOC0B bit, an immediate compare match is forced on the waveform
generation unit. The OC0B output is changed according to its COM0B1:0 bits setting. Note that the FOC0B bit is
implemented as a strobe. Therefore it is the value present in the COM0B1:0 bits that determines the effect of the forced
compare.
A FOC0B strobe will not generate any interrupt, nor will it clear the timer in CTC mode using OCR0B as TOP.
The FOC0B bit is always read as zero.
Bits 5:4 – Reserved
These bits are reserved bits in the Atmel ATmega48PA/88PA/168PA and will always read as zero.
Bit 3 – WGM02: Waveform Generation Mode
Bits 2:0 – CS02:0: Clock Select
The three clock select bits select the clock source to be used by the Timer/Counter.
If external pin modes are used for the Timer/Counter0, transitions on the T0 pin will clock the counter even if the pin is
configured as an output. This feature allows software control of the counting.
Bit
7
6
5
4
3
2
1
0
FOC0A
FOC0B
WGM02
CS02
CS01
CS00
TCCR0B
Read/Write
W
R
R/W
Initial Value
0
Table 15-9. Clock Select Bit Description
CS02
CS01
CS00
Description
0
No clock source (timer/ccounter stopped)
0
1
clkI/O/(no prescaling)
0
1
0
clkI/O/8 (from prescaler)
0
1
clkI/O/64 (from prescaler)
1
0
clkI/O/256 (from prescaler)
1
0
1
clkI/O/1024 (from prescaler)
1
0
External clock source on T0 pin. Clock on falling edge.
1
External clock source on T0 pin. Clock on rising edge.
相关PDF资料
PDF描述
MSP430G2252IRSA16T 16-BIT, FLASH, 16 MHz, RISC MICROCONTROLLER, PQCC16
MC68HC11ED0VFN2 8-BIT, 2 MHz, MICROCONTROLLER, PQCC44
MSM65514-JS 8-BIT, MROM, 12 MHz, MICROCONTROLLER, PQCC68
MSM65P513-GS-VK 8-BIT, OTPROM, 12 MHz, MICROCONTROLLER, PQFP64
MSM65P544-SS 8-BIT, OTPROM, 10 MHz, MICROCONTROLLER, PDIP64
相关代理商/技术参数
参数描述
MB9AF316MAPMC-G-JNE2 制造商:Fujitsu 功能描述:Bulk
MB9AF316MPMC-G-JNE1 制造商:FUJITSU 功能描述:MCU 32BIT CORTEX-M3 FM3 80LQFP 制造商:FUJITSU 功能描述:MCU, 32BIT, CORTEX-M3, FM3, 80LQFP, Controller Family/Series:ARM Cortex-M3, Core
MB9AF316NABGL-GE1 功能描述:ARM? Cortex?-M3 FM3 MB9A310A Microcontroller IC 32-Bit 40MHz 512KB (512K x 8) FLASH 112-LFBGA (10x10) 制造商:cypress semiconductor corp 系列:FM3 MB9A310A 包装:托盘 零件状态:有效 核心处理器:ARM? Cortex?-M3 核心尺寸:32-位 速度:40MHz 连接性:CSIO,EBI/EMI,I2C,LIN,UART/USART,USB 外设:DMA,LVD,POR,PWM,WDT I/O 数:83 程序存储容量:512KB(512K x 8) 程序存储器类型:闪存 EEPROM 容量:- RAM 容量:32K x 8 电压 - 电源(Vcc/Vdd):2.7 V ~ 5.5 V 数据转换器:A/D 16x12b 振荡器类型:内部 工作温度:-40°C ~ 105°C(TA) 封装/外壳:112-LFBGA 供应商器件封装:112-LFBGA(10x10) 标准包装:198
MB9AF316NAPF-G-JNE1 功能描述:ARM? Cortex?-M3 FM3 MB9A310A Microcontroller IC 32-Bit 40MHz 512KB (512K x 8) FLASH 100-PQFP (14x20) 制造商:cypress semiconductor corp 系列:FM3 MB9A310A 包装:托盘 零件状态:有效 核心处理器:ARM? Cortex?-M3 核心尺寸:32-位 速度:40MHz 连接性:CSIO,EBI/EMI,I2C,LIN,UART/USART,USB 外设:DMA,LVD,POR,PWM,WDT I/O 数:83 程序存储容量:512KB(512K x 8) 程序存储器类型:闪存 EEPROM 容量:- RAM 容量:32K x 8 电压 - 电源(Vcc/Vdd):2.7 V ~ 5.5 V 数据转换器:A/D 16x12b 振荡器类型:内部 工作温度:-40°C ~ 105°C(TA) 封装/外壳:100-BQFP 供应商器件封装:100-PQFP(14x20) 标准包装:66
MB9AF316NAPMC-G-JNE2 制造商:Fujitsu 功能描述:Bulk