参数资料
型号: MC33993DWBR2
厂商: Freescale Semiconductor
文件页数: 2/28页
文件大小: 0K
描述: IC SWITCH I/O INTERFACE 32-SOIC
标准包装: 1,000
系列: *
应用: *
接口: *
电源电压: *
封装/外壳: 32-SOIC(0.295",7.50mm 宽)
供应商设备封装: 32-SOIC
包装: 带卷 (TR)
安装类型: 表面贴装
Analog Integrated Circuit Device Data
10
Freescale Semiconductor
33993
FUNCTIONAL DESCRIPTION
FUNCTIONAL PIN DESCRIPTION
ARCHIVE
INFORMATION
ARCHIVE
INFORMATION
WAKE-UP (WAKE)
The WAKE pin is an open-drain output and a wake-up
input. The pin is designed to control a power supply Enable
pin. In the Normal mode, the WAKE pin is low. In the Sleep
mode, the WAKE pin is high. The WAKE pin has a pull-up to
the internal +5.0 V supply.
In Sleep mode with the WAKE pin high, falling edge of
WAKE will place the 33993 in Normal mode. In Sleep mode
with VDD applied, the INT pin must be high for negative edge
of WAKE to wake up the device. If VDD is not applied to the
device in Sleep mode, INT does not affect the WAKE
operation.
BATTERY INPUT (VPWR)
The VPWR pin is battery input and Power-ON Reset to the
33993 IC. The VPWR pin requires external reverse battery
and transient protection. Maximum input voltage on VPWR is
50 V. All wetting, sustain, and internal logic current is
provided from the VPWR pin.
VOLTAGE DRAIN SUPPLY (VDD)
The VDD input pin is used to determine logic levels on the
microprocessor interface (SPI) pins. Current from VDD is
used to drive SO output and the pull-up current for CS and
INT pins. VDD must be applied for wake-up from negative
edge of CS or INT.
GROUND (GND)
The GND pin provides ground for the IC as well as ground
for inputs programmed as switch-to-battery inputs.
PROGRAMMABLE SWITCHES 0–7 (SP0–SP7)
The 33993 device has 8 switch inputs capable of being
programmed to read switch-to-ground or switch-to-battery
contacts. The input is compared with a 4.0 V reference.
When programmed to be switch-to-battery, voltages greater
than 4.0 V are considered closed. Voltages less than 4.0 V
are considered open. The opposite holds true when inputs
are programmed as switch-to-ground. Programming features
are defined in Table 5 through Table 10 in the Logic
Commands and Registers section of this datasheet. Voltages
greater than the VPWR supply voltage will source current
through the SP inputs to the VPWR pin. Transient battery
voltages greater than 40 V must be clamped by an external
device.
SWITCH-TO-GROUND INPUTS 0–13 (SG0–SG13)
The SGn pins are switch-to-ground inputs only. The input
is compared with a 4.0 V reference. Voltages greater than
4.0 V are considered open. Voltages less than 4.0 V are
considered closed. Programming features are defined in
Registers section of this datasheet. Voltages greater than the
VPWR supply voltage will source current through the SG
inputs to the VPWR pin. Transient battery voltages greater
than 40 V must be clamped by an external device.
相关PDF资料
PDF描述
MS27484P18F35P CONN PLUG 66POS STRAIGHT W/PINS
VE-B04-IX-F4 CONVERTER MOD DC/DC 48V 75W
VE-B04-IX-F3 CONVERTER MOD DC/DC 48V 75W
D38999/20JF32SA CONN RCPT 32POS WALL MNT W/SCKT
MCZ33094EGR2 IC IGNITION CONTROL 12V 16-SOIC
相关代理商/技术参数
参数描述
MC33996EK 功能描述:电源开关 IC - 配电 16LOW SIDE SW 1.2OHM RoHS:否 制造商:Exar 输出端数量:1 开启电阻(最大值):85 mOhms 开启时间(最大值):400 us 关闭时间(最大值):20 us 工作电源电压:3.2 V to 6.5 V 电源电流(最大值): 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOT-23-5
MC33996EKR2 功能描述:电源开关 IC - 配电 16LOW SIDE SW 1.2OHM RoHS:否 制造商:Exar 输出端数量:1 开启电阻(最大值):85 mOhms 开启时间(最大值):400 us 关闭时间(最大值):20 us 工作电源电压:3.2 V to 6.5 V 电源电流(最大值): 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOT-23-5
MC33997DW 功能描述:IC SWITCH 3.3/5V SUPPLY 24-SOIC RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - 专用型 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,000 系列:- 应用:电源,ICERA E400,E450 输入电压:4.1 V ~ 5.5 V 输出数:10 输出电压:可编程 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:42-WFBGA,WLCSP 供应商设备封装:42-WLP 包装:带卷 (TR)
MC33997DWR2 制造商:Rochester Electronics LLC 功能描述:MLPS 3.3 IC - Bulk
MC33999EK 功能描述:多路器开关 IC 16 LOW SIDE PWM&SPI RoHS:否 制造商:Texas Instruments 通道数量:1 开关数量:4 开启电阻(最大值):7 Ohms 开启时间(最大值): 关闭时间(最大值): 传播延迟时间:0.25 ns 工作电源电压:2.3 V to 3.6 V 工作电源电流: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UQFN-16