参数资料
型号: MC68HC05V7CFNR2
厂商: MOTOROLA INC
元件分类: 微控制器/微处理器
英文描述: 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PQCC68
封装: PLASTIC, LCC-68
文件页数: 30/170页
文件大小: 589K
代理商: MC68HC05V7CFNR2
SECTION 15: MESSAGE DATA LINK CONTROLLER
MOTOROLA
Page 111
MC68HC05V7 Specification Rev. 1.0
including the CRC byte. Any messages received with more than the maximum number of
bytes will be discarded by the MDLC.
15.4.3.5.7
Invalid Active Level
If the MDLC transmits an active symbol but senses that the bus remains active longer than
163 us, then the MDLC will stop transmitting. The MDLC will treat this invalid active level
just like a received Break symbol. The MDLC will try to transmit the message again after
an idle bus is detected.
15.4.3.5.8
BREAK - Break
Any MDLC transmitting at the time a BREAK is detected will treat the BREAK as if a loss
of arbitration had occurred, and halt transmission. The MDLC will then retry to transmit the
message.
If while receiving a message the MDLC detects a BREAK symbol, it will treat the BREAK
as a reception error and clear the current Rx Buffer pointer.
Table 15-3:
MDLC J1850 Bus Error Summary
Error Condition
MDLC Function
Bus short to VBATT.
The MDLC will not transmit until the bus is idle.
Bus short to Gnd.
The MDLC will try only once to send the message.
No interrupt will be generated.
MDLC
transmits
but
receives invalid bits (noise).
The MDLC will abort transmission immediately. No
interrupt will be generated.
MDLC receives invalid bit.
The MDLC will reset the Rx Buffer pointer and wait
for the next valid SOF. No interrupt will be generated.
MDLC
receives
message
framing error.
The MDLC will reset the Rx Buffer pointer and wait
for the next valid SOF. No interrupt will be generated.
MDLC receives under length
or over length message.
The MDLC will reset the Rx Buffer pointer and wait
for the next valid SOF. No interrupt will be generated.
MDLC receives invalid CRC
The MDLC will reset the Rx Buffer pointer and wait
for the next valid SOF. No interrupt will be generated.
MDLC
receives
BREAK
symbol
The MDLC will reset the Rx Buffer pointer and wait
for the next valid SOF. No interrupt will be generated.
MDLC sends an EOD but
receives an active symbol.
The MDLC will reset the Rx Buffer pointer and try to
resend that message after an idle bus.
相关PDF资料
PDF描述
MC68HC05V7FNR2 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PQCC68
MC68HC05V7FN 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PQCC68
MC68HC05V7CB 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDIP56
MC68HC05V7CFU 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PQFP64
MC68HC05X16FU 8-BIT, MROM, MICROCONTROLLER, PQFP64
相关代理商/技术参数
参数描述
MC68HC05X16 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:High-density complementary metal oxide semiconductor HCMOS) microcontroller unit
MC68HC05X32 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:High-density complementary metal oxide semiconductor HCMOS) microcontroller unit
MC68HC05X4 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:HCMOS Microcontroller Unit
MC68HC05X4CDW 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:HCMOS Microcontroller Unit
MC68HC05X4DW 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:HCMOS Microcontroller Unit