参数资料
型号: MC68HC11D0CP2
厂商: FREESCALE SEMICONDUCTOR INC
元件分类: 微控制器/微处理器
英文描述: 8-BIT, MROM, 2 MHz, MICROCONTROLLER, PDIP40
封装: PLASTIC, DIP-40
文件页数: 36/124页
文件大小: 1481K
代理商: MC68HC11D0CP2
MC68HC11D3
PIN DESCRIPTIONS
MOTOROLA
TECHNICAL DATA
2-7
2.10.1 Port A
Port A can be read at any time. Inputs return the pin level; outputs return the pin driver
input level. If written, port A stores the data in an internal latch. It drives the pins only
if they are configured as outputs. Writes to port A do not change the pin state when
the pins are configured for timer output compares.
Out of reset, port A bits 7 and [3:0] are general high impedance inputs, while bits [6:4]
are outputs, driving low. Bidirectional lines PA7 and PA3 in PACTL are not changed
and do not have any effect on those bits. When the output compare functions associ-
ated with these pins are disabled, the DDR bits in PACTL govern the I/O state.
Refer to SECTION 6 PARALLEL I/O.
2.10.2 Port B
Port B is an 8-bit general-purpose I/O port with a data register (PORTB) and a data
direction register (DDRB). In single-chip mode, port B pins are general-purpose I/O
pins (PB[7:0]). In the expanded multiplexed mode, all of the port B pins act as the high-
order address bits (ADDR[15:8]) of the address bus.
Port B can be read at any time. Inputs return the sensed levels at the pin, while outputs
return the input level of the port B pin drivers. If port B is written, the data is stored in
an internal latch and can be driven only if port B is configured as general-purpose out-
puts in single-chip or bootstrap modes.
Port B pins are general-purpose inputs out of reset in single-chip and bootstrap
modes. These pins are outputs (the high order address bits) out of reset in expanded
multiplexed and test modes.
Refer to SECTION 6 PARALLEL I/O.
2.10.3 Port C
Port C is an 8-bit general-purpose I/O port with a data register (PORTC) and a data
direction register (DDRC). In the single-chip mode, port C pins are general-purpose I/
O pins (PC[7:0]). In the expanded multiplexed mode, port C pins are configured as
multiplexed address/data pins. During the address cycle, bits [7:0] of the address are
output on PC[7:0]. During the data cycle, bits [7:0] (PC[7:0]) are bidirectional data pins
controlled by the R/W signal.
Port C can be read at any time. Inputs return the sensed levels at the pin, while outputs
return the input level of the port C pin drivers. If port C is written, the data is stored in
an internal latch and can be driven only if port C is configured for general-purpose out-
puts in single-chip or bootstrap mode. Port C pins are general-purpose inputs out of
reset in single-chip and bootstrap modes. These pins are multiplexed low-order ad-
dress and data bus lines out of reset in expanded multiplexed and test modes.
The CWOM control bit in the PIOC register disables port C's P-channel output driver.
CWOM simultaneously affects all eight bits of port C. Because the N-channel driver is
not affected by CWOM, setting CWOM causes port C to become an open-drain-type
相关PDF资料
PDF描述
MC68HC11D0CP 8-BIT, MICROCONTROLLER, PDIP40
MC68HC11L6CFU1 8-BIT, OTPROM, 1 MHz, MICROCONTROLLER, PQFP64
MC68HC16S2CPU25 16-BIT, 25.17 MHz, MICROCONTROLLER, PQFP100
MC16S2CPU20B1 16-BIT, 20.97 MHz, MICROCONTROLLER, PQFP100
MC68HC16X1CTH 16-BIT, MROM, 16.78 MHz, MICROCONTROLLER, PQFP120
相关代理商/技术参数
参数描述
MC68HC11D0CP3 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller
MC68HC11D0FB 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller
MC68HC11D0FN 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller
MC68HC11D0FNR2 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller
MC68HC11D0P 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller