参数资料
型号: MC9S12DG256MPVE
厂商: FREESCALE SEMICONDUCTOR INC
元件分类: 微控制器/微处理器
英文描述: 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP112
封装: LQFP-112
文件页数: 6/132页
文件大小: 782K
代理商: MC9S12DG256MPVE
MC9S12DT256 Device User Guide V03.07
103
A.3 NVM, Flash and EEPROM
NOTE:
Unless otherwise noted the abbreviation NVM (Non Volatile Memory) is used for
both Flash and EEPROM.
A.3.1 NVM timing
The time base for all NVM program or erase operations is derived from the oscillator. A minimum
oscillator frequency fNVMOSC is required for performing program or erase operations. The NVM modules
do not have any means to monitor the frequency and will not prevent program or erase operation at
frequencies above or below the specified minimum. Attempting to program or erase the NVM modules at
a lower frequency a full program or erase transition is not assured.
The Flash and EEPROM program and erase operations are timed using a clock derived from the oscillator
using the FCLKDIV and ECLKDIV registers respectively. The frequency of this clock must be set within
the limits specified as fNVMOP.
The minimum program and erase times shown in
Table A-11 are calculated for maximum f
NVMOP and
maximum fbus. The maximum times are calculated for minimum fNVMOP and a fbus of 2MHz.
A.3.1.1 Single Word Programming
The programming time for single word programming is dependant on the bus frequency as a well as on
the frequency fNVMOP and can be calculated according to the following formula.
A.3.1.2 Burst Programming
This applies only to the Flash where up to 32 words in a row can be programmed consecutively using burst
programming by keeping the command pipeline filled. The time to program a consecutive word can be
calculated as:
The time to program a whole row is:
Burst programming is more than 2 times faster than single word programming.
tswpgm
9
1
fNVMOP
---------------------
25
1
fbus
----------
+
=
tbwpgm
4
1
fNVMOP
---------------------
9
1
fbus
----------
+
=
tbrpgm
tswpgm 31 tbwpgm
+
=
相关PDF资料
PDF描述
MC9S12DG256VFU 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP80
MC9S12DJ128VFU 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP80
MC9S12DB128VPVR2 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP112
MC9S12DG128MPVE 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP112
MC9S12A128CFUE 16-BIT, FLASH, 25 MHz, MICROCONTROLLER, PQFP80
相关代理商/技术参数
参数描述
MC9S12DG256VFUE 功能描述:16位微控制器 - MCU BARRACUDA4 MOS13 L01Y RoHS:否 制造商:Texas Instruments 核心:RISC 处理器系列:MSP430FR572x 数据总线宽度:16 bit 最大时钟频率:24 MHz 程序存储器大小:8 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:VQFN-40 安装风格:SMD/SMT
MC9S12DG256VPV 制造商:Freescale Semiconductor 功能描述: 制造商:Freescale Semiconductor 功能描述:MicroController, 16-Bit, 112 Pin, Plastic, QFP
MC9S12DG256VPVE 功能描述:16位微控制器 - MCU 16 Bit 25MHz RoHS:否 制造商:Texas Instruments 核心:RISC 处理器系列:MSP430FR572x 数据总线宽度:16 bit 最大时钟频率:24 MHz 程序存储器大小:8 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:VQFN-40 安装风格:SMD/SMT
MC9S12DJ128BCFU 功能描述:16位微控制器 - MCU 16 Bit 25MHz RoHS:否 制造商:Texas Instruments 核心:RISC 处理器系列:MSP430FR572x 数据总线宽度:16 bit 最大时钟频率:24 MHz 程序存储器大小:8 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:VQFN-40 安装风格:SMD/SMT
MC9S12DJ128BCPV 功能描述:16位微控制器 - MCU 16 Bit 25MHz RoHS:否 制造商:Texas Instruments 核心:RISC 处理器系列:MSP430FR572x 数据总线宽度:16 bit 最大时钟频率:24 MHz 程序存储器大小:8 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:VQFN-40 安装风格:SMD/SMT