参数资料
型号: MCP4262T-503E/MF
厂商: Microchip Technology
文件页数: 43/88页
文件大小: 0K
描述: IC POT DGTL DUAL 50K RHEO 10DFN
标准包装: 3,300
系列: WiperLock™
接片: 257
电阻(欧姆): 50k
电路数: 2
温度系数: 标准值 150 ppm/°C
存储器类型: 非易失
接口: 4 线 SPI(芯片选择)
电源电压: 2.7 V ~ 5.5 V
工作温度: -40°C ~ 125°C
安装类型: 表面贴装
封装/外壳: 10-VFDFN 裸露焊盘
供应商设备封装: 10-DFN-EP(3x3)
包装: 带卷 (TR)
MCP414X/416X/424X/426X
DS22059B-page 48
2008 Microchip Technology Inc.
7.4
Continuous Commands
The device supports the ability to execute commands
continuously. While the CS pin is in the active state (VIL
or VIHH). Any sequence of valid commands may be
received.
The following example is a valid sequence of events:
1.
CS pin driven active (VIL or VIHH).
2.
Read Command.
3.
Increment Command (Wiper 0).
4.
Increment Command (Wiper 0).
5.
Decrement Command (Wiper 1).
6.
Write Command (Volatile memory).
7.
Write Command (Non-Volatile memory).
8.
CS pin driven inactive (VIH).
TABLE 7-3:
COMMANDS
Note 1:
It is recommended that while the CS pin is
active, only one type of command should
be issued. When changing commands, it
is recommended to take the CS pin
inactive then force it back to the active
state.
2:
It is also recommended that long
command strings should be broken down
into shorter command strings. This
reduces the probability of noise on the
SCK pin corrupting the desired SPI
command string.
Command Name
# of
Bits
Writes
Value in
EEPROM
Operates on
Volatile/
Non-Volatile
memory
High
Voltage
(VIHH) on
CS pin?
Impact on
WiperLock or
Write Protect
Works
when
Wiper is
“locked”?
16-Bits
Yes (1)
Both
unlocked (1)
No
16-Bits
Both
unlocked (1)
No
8-Bits
Volatile Only
unlocked (1)
No
8-Bits
Volatile Only
unlocked (1)
No
High Voltage Write Data
16-Bits
Yes
Both
Yes
unchanged
No
High Voltage Read Data
16-Bits
Both
Yes
unchanged
Yes
High Voltage Increment Wiper
8-Bits
Volatile Only
Yes
unchanged
No
High Voltage Decrement Wiper
8-Bits
Volatile Only
Yes
unchanged
No
-
Enable
8-Bits
(2)
Non-Volatile
Only (2)
Yes
locked/
protected (2)
Yes
-
Disable
8-Bits
(3)
Non-Volatile
Only (3)
Yes
unlocked/
unprotected (3)
Yes
Note 1:
This command will only complete if wiper is “unlocked” (WiperLock Technology is Disabled).
2:
If the command is executed using address 02h or 03h, then that corresponding wiper is locked or
if with address 0Fh, then Write Protect is enabled.
3:
If the command is executed using with address 02h or 03h, then that corresponding wiper is unlocked or
if with address 0Fh, then Write Protect is disabled.
相关PDF资料
PDF描述
DS1746WP-120 IC RTC RAM Y2K 3.3V 120NS 34-PCM
MCP4262-103E/MF IC POT DGTL DUAL 10K RHEO 10DFN
DS1486-120 IC TIMEKEEPER RAM 128K 32-EDIP
MCP4262-104E/MF IC POT DGTL DUAL 100K RHEO 10DFN
MS3450W18-13P CONN RCPT 4POS WALL MNT W/PINS
相关代理商/技术参数
参数描述
MCP42XXDM-PTPLS 功能描述:子卡和OEM板 MCP42XX PICTail Plus Daughter Board RoHS:否 制造商:BeagleBoard by CircuitCo 产品:BeagleBone LCD4 Boards 用于:BeagleBone - BB-Bone - Open Source Development Kit
MCP42XXEV 功能描述:数字电位计开发工具 MCP42XX Eval Board RoHS:否 制造商:Arduino 产品:TinkerKit Rotary Potentiometers 工具用于评估:TinkerKit 电阻:4.7 kOhms 工作电源电压:0 V to 5 V
MCP431550R 制造商:Eaton Corporation 功能描述:TYPE MCP MOTOR CIRCUIT PROTECTOR 150A FOR SIZE 4 STARTER
MCP4331-103E/ML 功能描述:数字电位计 IC 10k SPI 7-bit Quad Chl, QFN20 RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel
MCP4331-103E/ST 功能描述:数字电位计 IC 10k SPI 7-bit Quad Chl, TSSOP20 RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel