- 您现在的位置：买卖IC网 > PDF目录10755 > MCP6561RT-E/OT (Microchip Technology)IC COMP PUSH-PULL 1.8V SOT23-5 PDF资料下载
参数资料
| 型号： | MCP6561RT-E/OT |
| 厂商： | Microchip Technology |
| 文件页数： | 4/14页 |
| 文件大小： | 0K |
| 描述： | IC COMP PUSH-PULL 1.8V SOT23-5 |
| 产品培训模块： | MCP656x |
| 标准包装： | 1 |
| 类型： | 通用 |
| 元件数： | 1 |
| 输出类型： | CMOS，推挽式，满摆幅，TTL |
| 电压 - 电源，单路/双路(±)： | 1.8 V ~ 5.5 V |
| 电压 - 输入偏移（最小值）： | 10mV @ 5.5V |
| 电流 - 输入偏压（最小值）： | 1pA @ 5.5V |
| 电流 - 输出（标准）： | 50mA |
| 电流 - 静态（最大值）： | 130µA |
| CMRR, PSRR（标准）： | 66dB CMRR，70dB PSRR |
| 传输延迟（最大）： | 80ns |
| 磁滞： | 5mV |
| 工作温度： | -40°C ~ 125°C |
| 封装/外壳： | SC-74A，SOT-753 |
| 安装类型： | 表面贴装 |
| 包装： | 标准包装 |
| 产品目录页面： | 681 (CN2011-ZH PDF) |
| 其它名称： | MCP6561RT-E/OTDKR |
CS6422
15
3.3.1
MIC - MICROPHONE PREAMPLIFIER ENABLE
The microphone preamplifier described in Section 3.1.1, “Acoustic Interface” is enabled by default,
but may be disabled by setting Mic to ‘0’. Refer to Section 3.1.1, “Acoustic Interface” for more details
on using the Microphone Preamplifier.
3.3.2
HDD - HALF-DUPLEX DISABLE
In normal operation, the CS6422 will be in a half-duplex mode if the echo canceller is not providing
enough loop gain reduction to prevent howling. This half-duplex mode is active at power-up while the
adaptive filter begins to train. Half-duplex mode prevents howling and also masks the convergence
process.
In some cases, such as when measuring convergence speed (see Section 4.3.2, “Testing Issues”),
the half-duplex mode is undesirable. By default, the half-duplex mode is enabled.
3.3.3
GB - GRADED BETA
The room-size adjustment scheme called “graded beta,” provided for the acoustic echo canceller in
the CS6422, is controlled by GB. The network echo canceller does not support graded beta.
Graded beta is an architectural enhancement to the CS6422 which takes advantage of the fact that
acoustic echoes tend to decay exponentially with time. The CS6422 can increase the beta, or update
gain, for the coefficients of the adaptive filter which occur earlier in time and decrease it for those that
occur later in time, which increases convergence speed while maintaining stability. In order to make
this improvement, there is an implicit assumption that the decay rate of the echo is known. The graded
beta control allows the system designer to adjust this. For very acoustically live rooms, use either no
decay (00) or slight decay (11). Cars and acoustically dead rooms can benefit from the most rapid decay
(01).
3.3.4
RVOL - RECEIVE VOLUME CONTROL
Volume in the receive path is set by RVol. The volume control in the receive direction is implemented
by a peak-limiting automatic gain control (AGC) and digital attenuation at the near-end output DAC.
The AGC is discussed in detail in Section 4., “Design Considerations”. See Section 4.1.3, “AGC”for a
full explanation of how it functions.
When the reference level is set to +0 dB, the AGC is disabled. Volume control is implemented by dig-
ital attenuation in 3 dB steps from this point on down. The maximum gain is +30 dB and the minimum
is -12 dB. The lowest gain setting (1111) mutes the receive path.
The default setting for RVol is +18 dB.
3.3.5
TSD - TRANSMIT SUPPRESSION DISABLE
The Transmit Supplementary Echo Suppression function is a non-linear echo control mechanism.
Transmit Suppression introduces TSAtt (see Register 3) of attenuation into the transmit path when it
is engaged. When TSMde = ‘1’, the transmit suppressor engages when there is speech detected in
the receive path and no near-end speech is present. When TSMde = ‘0’, the default case, the transmit
suppressor engages when there is no near-end speech present. When near-end speech is present,
the suppression attenuation is removed. By default, the transmit suppression function is enabled.
CS6422
DS295F1
15
相关PDF资料 |
PDF描述 |
|---|---|
| VE-J3H-MY-F3 | CONVERTER MOD DC/DC 52V 50W |
| B37872K2223K062 | CAP CER 0.022UF 200V X7R 1206 |
| VE-J3H-MY-F1 | CONVERTER MOD DC/DC 52V 50W |
| MCP65R46T-2402E/CHY | IC COMPARATOR 2.4V REF SOT-23-6 |
| VE-J3F-MY-F4 | CONVERTER MOD DC/DC 72V 50W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MCP6561T-E/LT | 功能描述:校验器 IC Singl 1.8V Push/Pull Comparator, E temp RoHS:否 制造商:STMicroelectronics 产品: 比较器类型: 通道数量: 输出类型:Push-Pull 电源电压-最大:5.5 V 电源电压-最小:1.1 V 补偿电压（最大值）:6 mV 电源电流（最大值）:1350 nA 响应时间: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SC-70-5 封装:Reel |
| MCP6561T-E/MC | 功能描述:校验器 IC SNGL 18V Push/Pull Comparator E temp RoHS:否 制造商:STMicroelectronics 产品: 比较器类型: 通道数量: 输出类型:Push-Pull 电源电压-最大:5.5 V 电源电压-最小:1.1 V 补偿电压（最大值）:6 mV 电源电流（最大值）:1350 nA 响应时间: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SC-70-5 封装:Reel |
| MCP6561T-E/MS | 功能描述:校验器 IC SNGL 18V Push/Pull Comparator E temp RoHS:否 制造商:STMicroelectronics 产品: 比较器类型: 通道数量: 输出类型:Push-Pull 电源电压-最大:5.5 V 电源电压-最小:1.1 V 补偿电压（最大值）:6 mV 电源电流（最大值）:1350 nA 响应时间: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SC-70-5 封装:Reel |
| MCP6561T-E/OT | 功能描述:校验器 IC Singl 1.8V Push/Pull Comparator, E temp RoHS:否 制造商:STMicroelectronics 产品: 比较器类型: 通道数量: 输出类型:Push-Pull 电源电压-最大:5.5 V 电源电压-最小:1.1 V 补偿电压（最大值）:6 mV 电源电流（最大值）:1350 nA 响应时间: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SC-70-5 封装:Reel |
| MCP6561T-E/OT-CUT TAPE | 制造商:Microchip 功能描述:MCP6561 Series 5.5 V 1 pA Low Power Push-Pull Output Comparator - SOT-23-5 |
发布紧急采购，3分钟左右您将得到回复。