- 您现在的位置：买卖IC网 > PDF目录98014 > MGSF3454XT1 (ON SEMICONDUCTOR) 1750 mA, 30 V, N-CHANNEL, Si, SMALL SIGNAL, MOSFET PDF资料下载
参数资料
| 型号： | MGSF3454XT1 |
| 厂商： | ON SEMICONDUCTOR |
| 元件分类： | 小信号晶体管 |
| 英文描述： | 1750 mA, 30 V, N-CHANNEL, Si, SMALL SIGNAL, MOSFET |
| 封装： | PLASTIC, TSOP-6 |
| 文件页数： | 4/34页 |
| 文件大小： | 355K |
| 代理商： | MGSF3454XT1 |
第1页第2页第3页当前第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页
Surface Mount Information
7–10
Motorola Small–Signal Transistors, FETs and Diodes Device Data
INFORMATION FOR USING SURFACE MOUNT PACKAGES
RECOMMENDED FOOTPRINTS FOR SURFACE MOUNTED APPLICATIONS
Surface mount board layout is a critical portion of the total
design. The footprint for the semiconductor packages must
be the correct size to ensure proper solder connection inter-
face between the board and the package. With the correct
pad geometry, the packages will self align when subjected to
a solder reflow process.
POWER DISSIPATION FOR A SURFACE MOUNT DEVICE
The power dissipation for a surface mount device is a func-
tion of the drain/collector pad size. These can vary from the
minimum pad size for soldering to a pad size given for
maximum power dissipation. Power dissipation for a surface
mount device is determined by TJ(max), the maximum rated
junction temperature of the die, R
θJA, the thermal resistance
from the device junction to ambient, and the operating
temperature, TA. Using the values provided on the data
sheet, PD can be calculated as follows:
PD =
TJ(max) – TA
R
θJA
The values for the equation are found in the maximum
ratings table on the data sheet. Substituting these values into
the equation for an ambient temperature TA of 25°C, one can
calculate the power dissipation of the device. For example,
for a SOT–223 device, PD is calculated as follows.
PD =
150
°C – 25°C
156
°C/W
= 800 milliwatts
The 156
°C/W for the SOT–223 package assumes the use
of the recommended footprint on a glass epoxy printed circuit
board to achieve a power dissipation of 800 milliwatts. There
are other alternatives to achieving higher power dissipation
from the surface mount packages. One is to increase the
area of the drain/collector pad. By increasing the area of the
drain/collector pad, the power dissipation can be increased.
Although the power dissipation can almost be doubled with
this method, area is taken up on the printed circuit board
which can defeat the purpose of using surface mount
technology. For example, a graph of R
θJA versus drain pad
area is shown in Figure 1.
Another alternative would be to use a ceramic substrate or
an aluminum core board such as Thermal Clad
. Using a
board material such as Thermal Clad, an aluminum core
board, the power dissipation can be doubled using the same
footprint.
T
O
AMBIENT
(
C/W)°
R
JA
,THERMAL
RE
S
IS
TANCE
,J
U
NCTI
O
N
θ
0.8 Watts
1.25 Watts*
1.5 Watts
A, AREA (SQUARE INCHES)
0.0
0.2
0.4
0.6
0.8
1.0
160
140
120
100
80
Board Material = 0.0625
″
G–10/FR–4, 2 oz Copper
TA = 25°C
*Mounted on the DPAK footprint
Figure 1. Thermal Resistance versus Drain Pad
Area for the SOT–223 Package (Typical)
SOLDER STENCIL GUIDELINES
Prior to placing surface mount components onto a printed
circuit board, solder paste must be applied to the pads.
Solder stencils are used to screen the optimum amount.
These stencils are typically 0.008 inches thick and may be
made of brass or stainless steel. For packages such as the
SOT–23, SC–59, SC–70/SOT–323, SC–90/SOT–416,
SOD–123, SOT–223, SOT–363, SO–14, SO–16, and
TSOP–6 packages, the stencil opening should be the same
as the pad size or a 1:1 registration.
相关PDF资料 |
PDF描述 |
|---|---|
| MGSF3454X | 1750 mA, 30 V, N-CHANNEL, Si, SMALL SIGNAL, MOSFET |
| MGSF3455VT1 | 3.5 A, 30 V, 0.1 ohm, P-CHANNEL, Si, POWER, MOSFET |
| MGSF3455VT3 | 3.5 A, 30 V, 0.1 ohm, P-CHANNEL, Si, POWER, MOSFET |
| MII-300GP | 32-BIT, 300 MHz, MICROPROCESSOR, PGA296 |
| MJ10000 | 20 A, 350 V, NPN, Si, POWER TRANSISTOR, TO-204AA |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MGSF3455VT1 | 制造商:Rochester Electronics LLC 功能描述:- Tape and Reel |
| MGSF3455XT1 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| MGSG12 | 功能描述:LED替换灯-基于LED RoHS:否 制造商:Chicago Miniature 照明颜色:Red 光强度: 电压额定值:115 V 封装: |
| MGSG24 | 功能描述:LED替换灯-基于LED RoHS:否 制造商:Chicago Miniature 照明颜色:Red 光强度: 电压额定值:115 V 封装: |
| MGSG28 | 功能描述:LED替换灯-基于LED RoHS:否 制造商:Chicago Miniature 照明颜色:Red 光强度: 电压额定值:115 V 封装: |
发布紧急采购，3分钟左右您将得到回复。