参数资料
型号: MK3732-07S
厂商: INTEGRATED DEVICE TECHNOLOGY INC
元件分类: 时钟产生/分配
英文描述: 49.46 MHz, OTHER CLOCK GENERATOR, PDSO16
封装: 0.150 INCH, SOIC-16
文件页数: 3/7页
文件大小: 185K
代理商: MK3732-07S
MK3732-07
ADSL VCXO CLOCK SOURCE
VCXO AND SYNTHESIZER
IDT / ICS ADSL VCXO CLOCK SOURCE
3
MK3732-07
REV G 050203
External Component Selection
The MK3732-07 requires a minimum number of external
components for proper operation.
Decoupling Capacitors
Decoupling capacitors of 0.01
F should be connected
between VDD and GND on pins 3 and 6, on pins 5 and 6,
and on pins 13 and 14, as close to the MK3732-07 as
possible. For optimum device performance, the decoupling
capacitors should be mounted on the component side of the
PCB. Avoid the use of vias in the decoupling circuit.
Series Termination Resistor
When the PCB traces between the clock outputs and the
loads are over 1 inch, series termination should be used. To
series terminate a 50
trace (a commonly used trace
impedance) place a 33
resistor in series with the clock
line, as close to the clock output pin as possible. The
nominal impedance of the clock output is 20
.
Quartz Crystal
The MK3732-07 VCXO function consists of the external
crystal and the integrated VCXO oscillator circuit. To assure
the best system performance (frequency pull range) and
reliability, a crystal device with the recommended
parameters must be used, and the layout guidelines
discussed in the following section must be followed.
The frequency of oscillation of a quartz crystal is determined
by its “cut” and by the load capacitors connected to it. The
MK3732-07 incorporates on-chip variable load capacitors
that “pull” (change) the frequency of the crystal. The crystal
specified for use with the MK3732-07 is designed to have
zero frequency error when the total of on-chip + stray
capacitance is 14pF.
The external crystal must be connected as close to the chip
as possible and should be on the same side of the PCB as
the MK3732-07. There should be no via’s between the
crystal pins and the X1 and X2 device pins. There should be
no signal traces underneath or close to the crystal.
Please see application note MAN05 for recommended
crystal parameters and suppliers.
Crystal Tuning Load Capacitors
The crystal traces should include pads for small fixed
capacitors, one between X1 and ground, and another
between X2 and ground. Stuffing of these capacitors on the
PCB is optional. The need for these capacitors is
determined at system prototype evaluation, and is
influenced by the particular crystal used (manufacture and
frequency) and by PCB layout. The typical required
capacitor value is 1 to 4 pF.
The procedure for determining the value of these capacitors
can be found in application note MAN05.
相关PDF资料
PDF描述
MC68B22P 16 I/O, PIA-GENERAL PURPOSE, PDIP40
MC68010L12X 16-BIT, 12.5 MHz, MICROPROCESSOR, CDIP64
M37451MC-XXXGP 8-BIT, MROM, 12.5 MHz, MICROCONTROLLER, PQFP80
MPC905D 50 MHz, PROC SPECIFIC CLOCK GENERATOR, PDSO16
MCIMX257CJM4A 32-BIT, 400 MHz, MICROPROCESSOR, PBGA400
相关代理商/技术参数
参数描述
MK3732-07SI 制造商:ICS 制造商全称:ICS 功能描述:ADSL VCXO CLOCK SOURCE
MK3732-07SITR 制造商:ICS 制造商全称:ICS 功能描述:ADSL VCXO CLOCK SOURCE
MK3732-07STR 制造商:ICS 制造商全称:ICS 功能描述:ADSL VCXO CLOCK SOURCE
MK3732-08 制造商:ICS 制造商全称:ICS 功能描述:ADSL Clock Source
MK3732-08R 功能描述:IC CLOCK SOURCE ADSL 20-QSOP RoHS:否 类别:集成电路 (IC) >> 时钟/计时 - 时钟发生器,PLL,频率合成器 系列:- 标准包装:2,000 系列:- 类型:PLL 时钟发生器 PLL:带旁路 输入:LVCMOS,LVPECL 输出:LVCMOS 电路数:1 比率 - 输入:输出:2:11 差分 - 输入:输出:是/无 频率 - 最大:240MHz 除法器/乘法器:是/无 电源电压:3.135 V ~ 3.465 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:32-LQFP 供应商设备封装:32-TQFP(7x7) 包装:带卷 (TR)