参数资料
型号: MK60N512VMD100
厂商: FREESCALE SEMICONDUCTOR INC
元件分类: 微控制器/微处理器
英文描述: FLASH, 100 MHz, RISC MICROCONTROLLER, PBGA144
封装: 13 X 13 MM, MAPBGA-144
文件页数: 21/76页
文件大小: 1862K
代理商: MK60N512VMD100
Table 13. MCG specifications (continued)
Symbol
Description
Min.
Typ.
Max.
Unit
Notes
Dlock
Lock entry frequency tolerance
± 1.49
± 2.98
%
Dunl
Lock exit frequency tolerance
± 4.47
± 5.97
%
tpll_lock
Lock detector detection time
0.15 +
1075(1/
fpll_ref)
ms
1. This parameter is measured with the internal reference (slow clock) being used as a reference to the FLL (FEI clock
mode).
2. These typical values listed are with the slow internal reference clock (FEI) using factory trim and DMX32=0.
3. The resulting system clock frequencies should not exceed their maximum specified values. The DCO frequency deviation
(
Δfdco_t) over voltage and temperature should be considered.
4. These typical values listed are with the slow internal reference clock (FEI) using factory trim and DMX32=1.
5. The resulting clock frequency must not exceed the maximum specified clock frequency of the device.
6. This specification was obtained at TBD frequency.
7. This specification applies to any time the FLL reference source or reference divider is changed, trim value is changed,
DMX32 bit is changed, DRS bits are changed, or changing from FLL disabled (BLPE, BLPI) to FLL enabled (FEI, FEE,
FBE, FBI). If a crystal/resonator is being used as the reference, this specification assumes it is already running.
8. Excludes any oscillator currents that are also consuming power while PLL is in operation.
9. This specification was obtained using a Freescale developed PCB. PLL jitter is dependent on the noise characteristics of
each PCB and results will vary.
10. This specification was obtained at internal frequency of TBD.
11. This specification applies to any time the PLL VCO divider or reference divider is changed, or changing from PLL disabled
(BLPE, BLPI) to PLL enabled (PBE, PEE). If a crystal/resonator is being used as the reference, this specification assumes
it is already running.
6.3.2 Oscillator electrical specifications
This section provides the electrical characteristics of the module.
6.3.2.1 Oscillator DC electrical specifications
Table 14. Oscillator DC electrical specifications
Symbol
Description
Min.
Typ.
Max.
Unit
Notes
VDD
Supply voltage
1.71
3.6
V
IDDOSC
Supply current — low-power mode (HGO=0)
32 kHz
4 MHz
8 MHz
16 MHz
24 MHz
32 MHz
500
200
300
700
1.2
1.5
nA
μA
mA
Table continues on the next page...
Peripheral operating requirements and behaviors
K60 Sub-Family Data Sheet Data Sheet, Rev. 4, 3/2011.
28
Preliminary
Freescale Semiconductor, Inc.
相关PDF资料
PDF描述
MB91F467DAPVS-GSE2 32-BIT, FLASH, 96 MHz, RISC MICROCONTROLLER, PQFP208
MC3S12Q128VFA16 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP48
M30875FHGP 32-BIT, FLASH, 32 MHz, MICROCONTROLLER, PQFP144
MB90803PF-G 16-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP100
MPC8255CZUHFBXXX 32-BIT, 166 MHz, RISC PROCESSOR, PBGA480
相关代理商/技术参数
参数描述
MK60R4F-R52 功能描述:金属膜电阻器 - 透孔 1/4watt 6.4ohm 1% RoHS:否 制造商:IRC 电阻:63.4 kOhms 容差:1 % 功率额定值:100 mW 电压额定值:200 V 温度系数:100 PPM / C 端接类型:Axial 工作温度范围: 尺寸:2.3 mm Dia. x 6.4 mm L 封装:Bulk
MK60X256VLL100 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:K60 Sub-Family Data Sheet
MK60X256VLQ100 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Up to 100 MHz ARM Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz
MK60X256VMD100 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Up to 100 MHz ARM Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz
MK6116LN-15 制造商:STME 功能描述: 制造商:STMicroelectronics 功能描述: 制造商:STMicroelectronics 功能描述:2K X 8 STANDARD SRAM, 150 ns, PDIP24