- 您现在的位置：买卖IC网 > PDF目录69035 > MPC107APX100L0 (MOTOROLA INC) MULTIFUNCTION PERIPHERAL, PPGA503 PDF资料下载
参数资料
| 型号： | MPC107APX100L0 |
| 厂商： | MOTOROLA INC |
| 元件分类： | 外设及接口 |
| 英文描述： | MULTIFUNCTION PERIPHERAL, PPGA503 |
| 封装： | PLASTIC, BGA-503 |
| 文件页数： | 35/46页 |
| 文件大小： | 585K |
| 代理商： | MPC107APX100L0 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页当前第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页
40
MPC107 Hardware Specifications (Rev 0.2)
PRELIMINARYSUBJECT TO CHANGE WITHOUT NOTICE
System Design Information
Figure 24. Example Voltage Sequencing Circuits
1.7.3 Decoupling Recommendations
Due to the MPC107s dynamic power management feature, large address and data buses, and high operating
frequencies, the MPC107 can generate transient power surges and high frequency noise in its power supply,
especially while driving large capacitive loads. This noise must be prevented from reaching other
components in the MPC107 system, and the MPC107 itself requires a clean, tightly regulated source of
power. Therefore, it is recommended that the system designer place at least one decoupling capacitor at each
Vdd, OVdd, GVdd, and LVdd pin of the MPC107. It is also recommended that these decoupling capacitors
receive their power from separate Vdd, OVdd, GVdd, and GND power planes in the PCB, utilizing short
traces to minimize inductance. These capacitors should have a value of 0.1 F. Only ceramic SMT (surface
mount technology) capacitors should be used to minimize lead inductance, preferably 0508 or 0603,
oriented such that connections are made along the length of the part.
In addition, it is recommended that there be several bulk storage capacitors distributed around the PCB,
feeding the Vdd, OVdd, GVdd, BVdd, and LVdd planes, to enable quick recharging of the smaller chip
capacitors. These bulk capacitors should have a low ESR (equivalent series resistance) rating to ensure the
quick response time necessary. They should also be connected to the power and ground planes through two
vias to minimize inductance. Suggested bulk capacitors100330 F (AVX TPS tantalum or Sanyo
OSCON).
1.7.4 Connection Recommendations
To ensure reliable operation, it is highly recommended to connect unused inputs to an appropriate signal
level. Unused active low inputs should be tied to OVdd. Unused active high inputs should be connected to
GND. All NC (no-connect) signals must remain unconnected.
Power and ground connections must be made to all external Vdd, OVdd, GVdd, LVdd, BVdd, and GND
pins of the MPC107.
The PCI_SYNC_OUT signal is intended to be routed halfway out to the PCI devices and then returned to
the PCI_SYNC_IN input of the MPC107.
The SDRAM_SYNC_OUT signal is intended to be routed halfway out to the SDRAM devices and then
returned to the SDRAM_SYNC_IN input of the MPC107. The trace length may be used to skew or adjust
the timing window as needed. See Motorola application note AN1794/D for more information on this topic.
3.3V
MUR420
1N5820
MUR420
1N5820
2.5V
+3.3V
+2.5V
Source
+5V
Source
5V
3.3V
2.5V
相关PDF资料 |
PDF描述 |
|---|---|
| MPC184VFB | SPECIALTY MICROPROCESSOR CIRCUIT, PBGA252 |
| MPC5123YVY400BR | RISC PROCESSOR, PBGA516 |
| MPC5123VY400B | RISC PROCESSOR, PBGA516 |
| MPC5123VY400BR | RISC PROCESSOR, PBGA516 |
| MPC5125YVN200 | 32-BIT, FLASH, 200 MHz, MICROCONTROLLER, PBGA324 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MPC-108 | 制造商:Greenlee Textron Inc 功能描述:Unspecified Tools & Accessories ADAPTER,MATING BULKHEAD |
| MPC108100J | 功能描述:厚膜电阻器 - 透孔 MPC10 10R 5% RoHS:否 制造商:Caddock 电阻:27 kOhms 容差:1 % 功率额定值:8 W 温度系数:50 PPM / C 系列:MS 端接类型:Axial 电压额定值:2 kV 工作温度范围:- 15 C to + 275 C 尺寸:8.89 mm Dia. x 23.11 mm L 封装:Bulk |
| MPC108101J | 制造商:TE Connectivity 功能描述:RESISTOR 10 WATT 100R 5% |
| MPC108102J | 功能描述:厚膜电阻器 - 透孔 MPC10 1K0 5% RoHS:否 制造商:Caddock 电阻:27 kOhms 容差:1 % 功率额定值:8 W 温度系数:50 PPM / C 系列:MS 端接类型:Axial 电压额定值:2 kV 工作温度范围:- 15 C to + 275 C 尺寸:8.89 mm Dia. x 23.11 mm L 封装:Bulk |
| MPC108103J | 功能描述:厚膜电阻器 - 透孔 MPC10 10K 5% RoHS:否 制造商:Caddock 电阻:27 kOhms 容差:1 % 功率额定值:8 W 温度系数:50 PPM / C 系列:MS 端接类型:Axial 电压额定值:2 kV 工作温度范围:- 15 C to + 275 C 尺寸:8.89 mm Dia. x 23.11 mm L 封装:Bulk |
发布紧急采购，3分钟左右您将得到回复。