- 您现在的位置：买卖IC网 > PDF目录20071 > NCV33275ST5.0T3G (ON Semiconductor)IC REG LDO 5V .3A SOT223-4 PDF资料下载
参数资料
| 型号： | NCV33275ST5.0T3G |
| 厂商： | ON Semiconductor |
| 文件页数： | 8/14页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO 5V .3A SOT223-4 |
| 标准包装： | 1 |
| 稳压器拓扑结构： | 正，固定式 |
| 输出电压： | 5V |
| 输入电压： | 最高 13V |
| 电压 - 压降（标准）： | 0.26V @ 300mA |
| 稳压器数量： | 1 |
| 电流 - 输出： | 300mA |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | TO-261-4，TO-261AA |
| 供应商设备封装： | SOT-223 |
| 包装： | 剪切带 (CT) |
| 其它名称： | NCV33275ST5.0T3GOSCT |
MC33275, NCV33275
APPLICATIONS INFORMATION
V in
V out
C in
C out
GND
Figure 15. Typical Application Circuit
LOAD
The MC33275 regulators are designed with internal
current limiting and thermal shutdown making them
user ? friendly. Figure 15 is a typical application circuit. The
output capability of the regulator is in excess of 300 mA,
with a typical dropout voltage of less than 260 mV. Internal
protective features include current and thermal limiting.
EXTERNAL CAPACITORS
These regulators require only a 0.33 m F (or greater)
capacitance between the output and ground for stability for
1.8 V, 2.5 V, 3.0 V, and 3.3 V output voltage options. Output
100
10
1.0
Stable Region
V out = 3.0 V
C out = 1.0 m F
C in = 1.0 m F
voltage options of 5.0 V require only 0.22 m F for stability.
The output capacitor must be mounted as close as possible
0.1
0
50
100
150
200
250
300
to the MC33275. If the output capacitor must be mounted
further than two centimeters away, then a larger value of
output capacitor may be required for stability. A value of
0.68 m F or larger is recommended. Most type of aluminum,
tantalum, or multilayer ceramic will perform adequately.
Solid tantalums or appropriate multilayer ceramic
capacitors are recommended for operation below 25 ° C. An
input bypass capacitor is recommended to improve transient
response or if the regulator is connected to the supply input
filter with long wire lengths, more than 4 inches. This will
reduce the circuit’s sensitivity to the input line impedance at
high frequencies. A 0.33 m F or larger tantalum, mylar,
ceramic, or other capacitor having low internal impedance
at high frequencies should be chosen. The bypass capacitor
should be mounted with shortest possible lead or track
length directly across the regulator ’s input terminals.
Figure 16 shows the ESR that allows the LDO to remain
stable for various load currents.
LOAD CURRENT (mA)
Figure 16. ESR for V out = 3.0V
Applications should be tested over all operating
conditions to insure stability.
THERMAL PROTECTION
Internal thermal limiting circuitry is provided to protect
the integrated circuit in the event that the maximum junction
temperature is exceeded. When activated, typically at
150 ° C, the output is disabled. There is no hysteresis built
into the thermal protection. As a result the output will appear
to be oscillating during thermal limit. The output will turn
off until the temperature drops below the 150 ° C then the
output turns on again. The process will repeat if the junction
increases above the threshold. This will continue until the
existing conditions allow the junction to operate below the
temperature threshold.
Thermal limit is not a substitute for proper
heatsinking.
The internal current limit will typically limit current to
450 mA. If during current limit the junction exceeds 150 ° C,
the thermal protection will protect the device also. Current
limit is not a substitute for proper heatsinking.
OUTPUT NOISE
In many applications it is desirable to reduce the noise
present at the output. Reducing the regulator bandwidth by
increasing the size of the output capacitor will reduce the noise.
http://onsemi.com
8
相关PDF资料 |
PDF描述 |
|---|---|
| 206325164001006 | CONN PCI EXPRESS 164POS 1MM BLK |
| T95R226M050HSSL | CAP TANT 22UF 50V 20% 2824 |
| GMA44DTBD | CONN EDGECARD 88POS R/A .125 SLD |
| T95R156M050ESSL | CAP TANT 15UF 50V 20% 2824 |
| MENB1030A0703N01 | POWER SUPPLY SWITCHER 22.5W 7.5V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| NCV33375D-2.5R2G | 功能描述:低压差稳压器 - LDO 300 mA 2.5 V 1% LOW DRO RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| NCV33375D-3.3R2G | 制造商:ON Semiconductor 功能描述:LDO Regulator Pos 3.3V 0.3A T/R 制造商:ON Semiconductor 功能描述:ANA 0.3A 3.3V LDO W/ ENAB - Tape and Reel 制造商:ON Semiconductor 功能描述:REEL / ANA 0.3A 3.3V LDO W/ ENAB 制造商:ON Semiconductor 功能描述:LDO Regulator 3.3V 1% 300mA SOIC8 |
| NCV33375ST1.8T3G | 功能描述:低压差稳压器 - LDO 300 mA 1.8V LOW DRO RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| NCV33375ST3.3T3G | 功能描述:低压差稳压器 - LDO ANA 0.3A 3.3V LDO W/ ENAB RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| NCV360SNAET1G | 制造商:ON Semiconductor 功能描述:USB POS OVP PMOSFET W STA - Tape and Reel |
发布紧急采购，3分钟左右您将得到回复。