- 您现在的位置：买卖IC网 > Datasheet目录238 > NUP4201MR6T1 (ON Semiconductor)IC TVS DIODE ARRAY HS LINE 6TSOP Datasheet资料下载
参数资料
| 型号： | NUP4201MR6T1 |
| 厂商： | ON Semiconductor |
| 文件页数： | 3/9页 |
| 文件大小： | 0K |
| 描述： | IC TVS DIODE ARRAY HS LINE 6TSOP |
| 产品变化通告： | LTB Notification 03/Jan/2008 |
| 标准包装： | 1 |
| 电压 - 反向隔离（标准值）： | 5V |
| 电压 - 击穿： | 6V |
| 功率（瓦特）： | 500W |
| 电极标记： | 4 通道阵列 - 双向 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | SC-74，SOT-457 |
| 供应商设备封装： | 6-TSOP |
| 包装： | 剪切带 (CT) |
| 其它名称： | NUP4201MR6T1OSCT |
NUP4201MR6
IEC 61000 ? 4 ? 2 Spec.
Test First Peak
Voltage Current
Level (kV) (A)
Current at
30 ns (A)
Current at
60 ns (A)
I peak
100%
90%
IEC61000 ? 4 ? 2 Waveform
1
2
7.5
4
2
2
3
4
4
6
8
15
22.5
30
8
12
16
4
6
8
I @ 30 ns
I @ 60 ns
10%
t P = 0.7 ns to 1 ns
Figure 3. IEC61000 ? 4 ? 2 Spec
ESD Gun
TVS
Oscilloscope
50 W
50 W
Cable
Figure 4. Diagram of ESD Test Setup
The following is taken from Application Note
AND8308/D ? Interpretation of Datasheet Parameters
for ESD Devices.
ESD Voltage Clamping
For sensitive circuit elements it is important to limit the
voltage that an IC will be exposed to during an ESD event
to as low a voltage as possible. The ESD clamping voltage
is the voltage drop across the ESD protection diode during
an ESD event per the IEC61000 ? 4 ? 2 waveform. Since the
IEC61000 ? 4 ? 2 was written as a pass/fail spec for larger
systems such as cell phones or laptop computers it is not
clearly defined in the spec how to specify a clamping voltage
at the device level. ON Semiconductor has developed a way
to examine the entire voltage waveform across the ESD
protection diode over the time domain of an ESD pulse in the
form of an oscilloscope screenshot, which can be found on
the datasheets for all ESD protection diodes. For more
information on how ON Semiconductor creates these
screenshots and how to interpret them please refer to
AND8307/D.
100
90
80
70
60
50
40
30
20
10
t r
t P
PEAK VALUE I RSM @ 8 m s
PULSE WIDTH (t P ) IS DEFINED
AS THAT POINT WHERE THE
PEAK CURRENT DECAY = 8 m s
HALF VALUE I RSM /2 @ 20 m s
0
0
20
40
60
80
t, TIME ( m s)
Figure 5. 8 X 20 m s Pulse Waveform
http://onsemi.com
3
相关PDF资料 |
PDF描述 |
|---|---|
| NUP4202W1T2G | IC TVS ARRAY HS DATALINE SOT-363 |
| NUP4212UPMUTAG | TVS QUAD ARRAY LOW CAP 6-UDFN |
| NUP4302MR6T1 | IC DIODE ARRAY SCHOTTKY TSOP6 |
| NUP4304MR6T1 | IC DIODE ARRAY LO CAP ESD SC74-6 |
| NUP45V6P5T5G | TVS QUAD ARRAY LOW CAP SOT-953 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| NUP4201MR6T1G | 功能描述:TVS二极管阵列 Low Cap. TVS Array Hi Spd Data Protect RoHS:否 制造商:Littelfuse 极性: 通道:4 Channels 击穿电压: 钳位电压:11.5 V 工作电压:2.5 V 峰值浪涌电流:20 A 安装风格:SMD/SMT 端接类型:SMD/SMT 系列: 最小工作温度:- 40 C 最大工作温度:+ 85 C |
| NUP4201MR6T1G | 制造商:ON Semiconductor 功能描述:TVS DIODE ARRAY 500W 5V TSOP 制造商:ON Semiconductor 功能描述:TVS DIODE ARRAY, 500W, 5V, TSOP |
| NUP4201MR6T1G-CUT TAPE | 制造商:ON 功能描述:NUP4201MR6 Series 6 V 500 W Unidirectional Transient Voltage Suppressor |
| NUP4202 | 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:Low cap. diode array for 2 Line High Speed USB protection devic |
| NUP4202W1 | 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:Transient Voltage Suppressors |
发布紧急采购，3分钟左右您将得到回复。