- 您现在的位置：买卖IC网 > PDF目录18774 > OTX-418-HH-CP8-MS (Linx Technologies Inc)TRANSMITTER 418MHZ MS SERIES PDF资料下载
参数资料
| 型号： | OTX-418-HH-CP8-MS |
| 厂商： | Linx Technologies Inc |
| 文件页数： | 4/5页 |
| 文件大小： | 0K |
| 描述： | TRANSMITTER 418MHZ MS SERIES |
| 产品目录绘图： | Compact Handheld Transmitter |
| 标准包装： | 25 |
| 功能： | 发射器 |
| 调制或协议： | ASK，OOK |
| 频率： | 418MHz |
| 应用： | 通用遥控系统，车库门开启器，RKE |
| 接口： | 手持型，8 按钮 |
| 数据传输率 - 最大： | 9.6 kbps |
| 特点： | 8 按钮，1000 英尺 工作距离 |
| 电源电压： | 2.1 V ~ 3.6 V |
TYPICAL APPLICATIONS
The signal sent by the MS Long-Range Transmitter can
be received by an LR Series receiver module or the LT
Series transceiver module. The outstanding sensitivity
of the LR Series receiver offers the best range when
used with a Linx OEM transmitter. The receiver module
is then connected directly to an MS Series decoder,
which will decode the transmitted signal.
When a button is pressed on the transmitter, a
corresponding line on the decoder will go high. This can
then be connected to external circuitry to perform
whatever function is required by the application.
The decoder must learn the transmitter’s address
before they can work together. This is done by taking
the LEARN line on the decoder high, typically with a
RXM-***-LR
LICAL-DEC-MS001
pushbutton switch. The MODE_IND line will start switching (if a LED is attached,
this will cause it to flash) indicating that the decoder is in Learn Mode. Press any
of the buttons on the transmitter to initiate a transmission. Take the LEARN line
high again to exit Learn Mode and the system will be ready for use. The figure
below shows a schematic for a typical application.
The MS Long-Range Transmitter
is set to 9,600bps, so
SEL_BAUD0 should be tied high
and SEL_BAUD1 tied low.
The decoder has several unique
features, such as Latch Mode,
Receiver Control, and TX_ID.
If the LATCH line is tied to V CC ,
VCC
GND
1
2
3
4
5
6
7
8
NC
NC
NC
GND
VCC
PDN
RSSI
DATA
RXM-LR
ANT
GND
NC
NC
NC
NC
NC
NC
16
15
14
13
12
11
10
9
GND
the outputs will go high on the
first transmission, then low on
the second. Figure 6 shows it
tied low, so the outputs will be
momentary (high for as long as a
signal is received that instructs
the decoder to make them high).
The RX_CNTL line can be
connected to the PDN line of the
VCC
220
1
2
3
4
5
6
7
8
9
10
D6
D7
SEL_BAUD0
SEL_BAUD1
GND
GND
LATCH
RX_CNTL
TX_ID
MODE_IND
D5
D4
D3
D2
VCC
VCC
D1
D0
DATA_IN
LEARN
20
1 9
18
17
16
15
14
13
12
11
VCC
receiver and the decoder will
GND
LICAL-DEC-MS001
activate the receiver with a 10%
duty cycle This greatly reduces
the average current consumption
GND
Figure 6: LR Receiver and MS Decoder Schematic
of the system. The adjacent figure shows it tied to ground, but to use this feature,
connect the RX_CNTL line of the decoder directly to the receiver’s PDN line.
The TX_ID line will output a number associated with the originating transmitter /
encoder. Application Note AN-00156 shows how to use this feature.
Data guides for the receivers, the MS encoder, and the MS decoder can be
found on the Linx Technologies website at www.linxtechnologies.com.
Page 6
Figure 7: OTX-***-HH-CP8-MS Schematic
Page 7
相关PDF资料 |
PDF描述 |
|---|---|
| CMD-HHLR-433-MD_ | XMITTER HANDHELD 433MHZ 8 BUTTON |
| CMD-HHLR-315-MD_ | XMITTER HANDHELD 315MHZ 8 BUTTON |
| CMD-HHCP-433-MD_ | XMITTER HANDHELD 433MHZ 8 BUTTON |
| OTX-315-HH-KF5-MS | XMITTER KEYFOB 315MHZ 5 BUTTON |
| OTX-315-HH-KF4-MS | XMITTER KEYFOB 315MHZ 4 BUTTON |
相关代理商/技术参数 |
参数描述 |
|---|---|
| OTX-418-HH-KF1-MS | 功能描述:射频模块 1 Button MS Keyfob Transmitter 418MHz RoHS:否 制造商:Linx Technologies 产品:Transceiver Modules 频带:902 MHz to 928 MHz 输出功率:- 15.5 dBm to + 12.5 dBm 接口类型:UART 工作电源电压:- 0.3 VDC to + 5.5 VDC 传输供电电流:38.1 mA 接收供电电流:22.7 mA 天线连接器类型:U.FL 最大工作温度:+ 85 C 尺寸:1.15 mm x 0.63 mm x 0.131 mm |
| OTX-418-HH-KF2-MS | 功能描述:射频模块 2 Button MS Keyfob Transmitter 418MHz RoHS:否 制造商:Linx Technologies 产品:Transceiver Modules 频带:902 MHz to 928 MHz 输出功率:- 15.5 dBm to + 12.5 dBm 接口类型:UART 工作电源电压:- 0.3 VDC to + 5.5 VDC 传输供电电流:38.1 mA 接收供电电流:22.7 mA 天线连接器类型:U.FL 最大工作温度:+ 85 C 尺寸:1.15 mm x 0.63 mm x 0.131 mm |
| OTX-418-HH-KF3-MS | 功能描述:射频模块 3 Button MS Keyfob Transmitter 418MHz RoHS:否 制造商:Linx Technologies 产品:Transceiver Modules 频带:902 MHz to 928 MHz 输出功率:- 15.5 dBm to + 12.5 dBm 接口类型:UART 工作电源电压:- 0.3 VDC to + 5.5 VDC 传输供电电流:38.1 mA 接收供电电流:22.7 mA 天线连接器类型:U.FL 最大工作温度:+ 85 C 尺寸:1.15 mm x 0.63 mm x 0.131 mm |
| OTX-418-HH-KF4-MS | 功能描述:射频模块 4 Button MS Keyfob Transmitter 418MHz RoHS:否 制造商:Linx Technologies 产品:Transceiver Modules 频带:902 MHz to 928 MHz 输出功率:- 15.5 dBm to + 12.5 dBm 接口类型:UART 工作电源电压:- 0.3 VDC to + 5.5 VDC 传输供电电流:38.1 mA 接收供电电流:22.7 mA 天线连接器类型:U.FL 最大工作温度:+ 85 C 尺寸:1.15 mm x 0.63 mm x 0.131 mm |
| OTX-418-HH-KF5-MS | 功能描述:射频模块 5 Button MS Keyfob Transmitter 418MHz RoHS:否 制造商:Linx Technologies 产品:Transceiver Modules 频带:902 MHz to 928 MHz 输出功率:- 15.5 dBm to + 12.5 dBm 接口类型:UART 工作电源电压:- 0.3 VDC to + 5.5 VDC 传输供电电流:38.1 mA 接收供电电流:22.7 mA 天线连接器类型:U.FL 最大工作温度:+ 85 C 尺寸:1.15 mm x 0.63 mm x 0.131 mm |
发布紧急采购，3分钟左右您将得到回复。