- 您现在的位置：买卖IC网 > PDF目录365348 > PC33991DH (Motorola, Inc.) Gauge Driver Integrated Circuit PDF资料下载
参数资料
| 型号： | PC33991DH |
| 厂商： | Motorola, Inc. |
| 英文描述： | Gauge Driver Integrated Circuit |
| 中文描述： | 仪表驱动集成电路 |
| 文件页数： | 15/36页 |
| 文件大小： | 660K |
| 代理商： | PC33991DH |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页当前第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页
MOTOROLA ANALOG INTEGRATED CIRCUIT DEVICE DATA
33991
15
These bits are
write-only
.
PE12–Null Command for Status Read
0 = Disable
1 = Enable
PE11–PE5—These bits must be transmitted as logic [0] for
valid PECR commands.
PE4–Clock Calibration Frequency Selector
0 = Maximum f = 1 MHz (for 8 μs calibration pulse)
1 = Nominal f = 1 MHz (for 8 μs calibration pulse)
PE3–Clock Calibration Enable—This bit enables or disables
the clock calibration.
0 = Disable
1 = Enable
PE2–Oscillator Adjustment
0 = Tosc
1 = 0.66 x Tosc
PE1–Gauge 1 Enable—This bit enables or disables the
output driver of Gauge 1.
0 = Disable
1= Enable
PE0–Gauge 0 Enable—This bit enables or disables the
output driver of Gauge 0.
0 = Disable
1 = Enable
Maximum Velocity Register (VELR)
SIAddress001—GaugeMaximumVelocityRegister,isused
to set a maximum velocity for each gauge. See Table 4.
Bits D7-D0 contain a position value from 1-255
representative of the table position value. The table value
becomes the maximum velocity until it is changed to another
value. If a maximum value is chosen greater than the maximum
velocity in the acceleration table, the maximum table value will
become the maximum velocity. If the motor is turning at a value
greater than the new maximum, the motor will ignore the new
value until the speed falls equal to, or below it. Velocity for each
motor can be changed simultaneously, or independently, by
writing D8 and/or D9 to a logic [1]. Bits D10 –D12 must be at
logic [0] for valid VELR commands.
These bits are
write-only
.
V12–V10—These bits must be transmitted as logic [0] for
valid VELR commands.
V9–Gauge 1 Velocity—Specifies whether the maximum
velocity determined in the V7-V0 field applies to Gauge 1
0 = Velocity does not apply to Gauge 1
1 = Velocity applies to Gauge 1
V8–Gauge 0 Velocity—Specifies whether the maximum
velocity specified in the V7-V0 field applies to Gauge 0
0 = Velocity does not apply to Gauge 0
1 = Velocity applies to Gauge 0
V7–V0 Maximum Velocity—Specifies the maximum velocity
positionfromthe accelerationtable. Thisvelocitywill remainthe
maximum of the intended gauge until changed by command.
Velocities can range from position 1 (00000001) to position 255
(11111111).
Gauge 0/1 Position Register (POS0R, POS1R)
SI Addresses 010—Gauge 0 Position Register receives
writing when communicating the desired pointer positions.
SI Address 011—Gauge 1 Position Register receives writing
when communicating the desired pointer positions.
Register bits D11–D0 receives writing when communicating
the desired pointer positions.
Commandedpositionscanrangefrom0to4095.TheD12bit
must be at logic [0] for valid POS0R and POS1R commands.
Table 3. Power, Enable and Calibration Register (PECR)
Address 000
D12
D11
D10
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
Write
PE12
0
0
0
0
0
0
0
PE4
PE3
PE2
PE1
PE0
Table 4. Maximum Velocity Register (VELR)
Address 001
D12
D11
D10
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
Write
0
0
0
V9
V8
V7
V6
V5
V4
V3
V2
V1
V0
F
Freescale Semiconductor, Inc.
Go to: www.freescale.com
n
.
相关PDF资料 |
PDF描述 |
|---|---|
| PC33999EK | 16-Output Switch with SPI and PWM Control |
| PC34710EWR2 | Adjustable Dual Output Switching Power Supply |
| PC34710EW | Adjustable Dual Output Switching Power Supply |
| PC8374L | SensorPathTM SuperI/O with Glue Functions |
| PC8374L0VLA | SensorPathTM SuperI/O with Glue Functions |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PC33991DH/R2 | 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:Gauge Driver Integrated Circuit |
| PC33991FS | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog Products PC33991FS Fact Sheet |
| PC33991R2 | 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:Gauge Driver Integrated Circuit |
| PC33996EK/R2 | 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:16-Output Switch with SPI Control |
| PC33997 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog IC |
发布紧急采购，3分钟左右您将得到回复。