参数资料
型号: PC4D10SNIP0F
厂商: Sharp Microelectronics
文件页数: 8/12页
文件大小: 0K
描述: PHOTOCOUPLER 10MBPS 2CH 8-SMD
产品目录绘图: PC4D10SNIP0F Circuit
标准包装: 1
系列: OPIC™
电压 - 隔离: 3750Vrms
通道数: 2,单向
电流 - 输出 / 通道: 50mA
数据速率: 10Mbps
传输延迟高 - 低 @ 如果: 48ns @ 7.5mA
电流 - DC 正向(If): 20mA
输入类型: DC
输出类型: 开路集电极
安装类型: 表面贴装
封装/外壳: 8-SOIC(0.154",3.90mm 宽)
供应商设备封装: 8-Miniflat
包装: 标准包装
产品目录页面: 2770 (CN2011-ZH PDF)
其它名称: 425-2536-6
PC4D10SNIP0F Series
■ Design Considerations
● Recommended operating conditions
Parameter
Low level input current
High level input current
Supply voltage
Fan out (TTL load)
Output pull-up resitor
Operating temperature
Symbol
I FL
I FH
V CC
N
R L
T opr
MIN.
0
8
4.5
?
330
? 40
TYP.
?
?
?
?
?
?
MAX.
250
15
5.5
5
4 000
+ 85
Unit
μ A
mA
V
?
Ω
? C
● Notes about static electricity
Transistor of detector side in bipolar con ? guration may be damaged by static electricity due to its minute de-
sign.
When handling these devices, general countermeasure against static electricity should be taken to avoid
breakdown of devices or degradation of characteristics.
● Design guide
In order to stabilize power supply line, we should certainly recommend to connect a by-pass capacitor of
0.01 μ F or more between V CC and GND near the device.
In case that some sudden big noise caused by voltage variation is provided between primary and secondary
terminals of photocoupler some current caused by it is ? oating capacitance may be generated and result in
false operation since current may go through LED or current may change.
If the photocoupler may be used under the circumstances where noise will be generated we recommend to
use the bypass capacitors at the both ends of LED.
The detector which is used in this device, has parasitic diode between each pins and GND.
There are cases that miss operation or destruction possibly may be occurred if electric potential of any pin
becomes below GND level even for instant.
Therefore it shall be recommended to design the circuit that electric potential of any pin does not become
below GND level.
This product is not designed against irradiation and incorporates non-coherent LED.
● Degradation
In general, the emission of the LED used in photocouplers will degrade over time.
In the case of long term operation, please take the general LED degradation (50% degradation over 5 years)
into the design consideration.
Please decide the input current which become 2 times of MAX. I FHL .
● Recommended foot print (reference)
7.49
1.9
(Unit : mm)
8
Sheet No.: D2-A09201EN
相关PDF资料
PDF描述
PC4SD11NTZB PHOTOCOUPLER TRIAC OUT 6-DIP
PC4SD21NTZD PHOTOCOUPLER TRIAC OUT ZC 6-DIP
PC4SF11YVZBF PHOTOCOUPLER TRIAC OUT 6-DIP
PC4SF21YVZCF PHOTOCOUPLER TRIAC OUT ZC 6-DIP
PC713V2NSZXF PHOTOCOUPLER TRAN OUT 6-DIP
相关代理商/技术参数
参数描述
PC4D10SYIP0F 功能描述:高速光耦合器 High Speed10Mb/s VDE RoHS:否 制造商:Avago Technologies 电流传递比: 最大波特率: 最大正向二极管电压:1.75 V 最大反向二极管电压:5 V 最大功率耗散:40 mW 最大工作温度:+125 C 最小工作温度:- 40 C 封装 / 箱体:SOIC-5 封装:Tube
PC4DD22-4G4 制造商:SONFAR 功能描述:
PC4DD43-1 制造商:BURNDY 功能描述:
PC4E10-6P 功能描述:PC 6C 6#20 PIN RECP 制造商:amphenol industrial operations 系列:* 零件状态:有效 标准包装:1
PC4F0002-C-19N-1-C 制造商:POLAMCO 功能描述:RECEPTACLE, JAM NUT, RJ45, CAT 5E