- 您现在的位置：买卖IC网 > PDF目录3777 > PCA8575PW,118 (NXP Semiconductors)IC I/O EXPANDER I2C 16B 24TSSOP PDF资料下载
参数资料
| 型号： | PCA8575PW,118 |
| 厂商： | NXP Semiconductors |
| 文件页数： | 3/30页 |
| 文件大小： | 0K |
| 描述： | IC I/O EXPANDER I2C 16B 24TSSOP |
| 特色产品： | NXP - I2C Interface |
| 标准包装： | 1 |
| 接口： | I²C |
| 输入/输出数： | 16 |
| 中断输出： | 是 |
| 频率 - 时钟： | 400kHz |
| 电源电压： | 2.3 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 24-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 24-TSSOP |
| 包装： | 标准包装 |
| 包括： | POR |
| 其它名称： | 568-8248-6 |
第1页第2页当前第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页
PCA8575_2
NXP B.V. 2007. All rights reserved.
Product data sheet
Rev. 02 — 21 March 2007
11 of 30
NXP Semiconductors
PCA8575
Remote 16-bit I/O expander for I2C-bus with interrupt
8.4 Power-on reset
When power is applied to VDD, an internal Power-On Reset (POR) holds the PCA8575 in
a reset condition until VDD has reached VPOR. At that point, the reset condition is released
and the PCA8575 registers and I2C-bus/SMBus state machine will initialize to their default
states. Thereafter VDD must be lowered below 0.2 V to reset the device.
8.5 Interrupt output (INT)
The PCA8575 provides an open-drain interrupt (INT) which can be fed to a corresponding
chips a kind of master function which can initiate an action elsewhere in the system.
An interrupt is generated by any rising or falling edge of the port inputs. After time tv(D) the
signal INT is valid.
The interrupt disappears when data on the port is changed to the original setting or data is
read from or written to the device which has generated the interrupt.
In the Write mode, the interrupt may become deactivated (HIGH) on the rising edge of the
write to port pulse. On the falling edge of the write to port pulse the interrupt is denitely
deactivated (HIGH).
The interrupt is reset in the Read mode on the rising edge of the read from port pulse.
During the resetting of the interrupt itself, any changes on the I/Os may not generate an
interrupt. After the interrupt is reset any change in I/Os will be detected and transmitted as
an INT.
Fig 14. Application of multiple PCA8575s with interrupt
002aac676
VDD
MICROCOMPUTER
INT
PCA8575
INT
PCA8575
INT
device 1
device 2
PCA8575
INT
device 8
相关PDF资料 |
PDF描述 |
|---|---|
| PCA9502BS,151 | IC I/O EXPANDER I2C/SPI 24HVQFN |
| PCA9501D,118 | IC I/O EXPANDER I2C 8B 20SOIC |
| ATTINY44A-CCUR | MCU AVR 4KB FLASH 20MHZ 15UFBGA |
| 2-583717-7 | CONN CARD EDGE 14POS .100 PCB |
| ATTINY2313A-SUR | MCU AVR 2KB FLASH 20MHZ 20SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PCA8576C | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Universal LCD driver for low multiplex rates |
| PCA8576CH/Q900,157 | 功能描述:LCD 驱动器 UNIVERSAL LCD DRIVER LOW MULTIPLEX RATES RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| PCA8576CH/Q900/1 | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Universal LCD driver for low multiplex rates |
| PCA8576CH/Q900/1,1 | 功能描述:LCD 驱动器 MULT DIG/SEG 200KHz RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| PCA8576CH/Q900/1,118 | 制造商:NXP Semiconductors 功能描述:Cut Tape 制造商:NXP Semiconductors 功能描述:0 |
发布紧急采购，3分钟左右您将得到回复。