参数资料
型号: PCA9531PW,118
厂商: NXP Semiconductors
文件页数: 22/27页
文件大小: 0K
描述: IC LED DRIVER RGB 16-TSSOP
标准包装: 2,500
拓扑: 开路漏极,PWM
输出数: 8
内部驱动器:
类型 - 主要: 背光,LED 闪烁器
类型 - 次要: RGB
频率: 400kHz
电源电压: 2.3 V ~ 5.5 V
安装类型: 表面贴装
封装/外壳: 16-TSSOP(0.173",4.40mm 宽)
供应商设备封装: 16-TSSOP
包装: 带卷 (TR)
工作温度: -40°C ~ 85°C
配用: 568-4003-ND - DEMO BOARD LED DIMMER
568-3615-ND - DEMO BOARD I2C
其它名称: 935274729118
PCA9531PW-T
PCA9531PW-T-ND
NXP Semiconductors
PCA9531
8-bit I 2 C-bus LED dimmer
14. Handling information
All input and output pins are protected against ElectroStatic Discharge (ESD) under
normal handling. When handling ensure that the appropriate precautions are taken as
described in JESD625-A or equivalent standards.
15. Soldering of SMD packages
This text provides a very brief insight into a complex technology. A more in-depth account
of soldering ICs can be found in Application Note AN10365 “Surface mount re?ow
soldering description”.
15.1 Introduction to soldering
Soldering is one of the most common methods through which packages are attached to
Printed Circuit Boards (PCBs), to form electrical circuits. The soldered joint provides both
the mechanical and the electrical connection. There is no single soldering method that is
ideal for all IC packages. Wave soldering is often preferred when through-hole and
Surface Mount Devices (SMDs) are mixed on one printed wiring board; however, it is not
suitable for ?ne pitch SMDs. Re?ow soldering is ideal for the small pitches and high
densities that come with increased miniaturization.
15.2 Wave and re?ow soldering
Wave soldering is a joining technology in which the joints are made by solder coming from
a standing wave of liquid solder. The wave soldering process is suitable for the following:
? Through-hole components
? Leaded or leadless SMDs, which are glued to the surface of the printed circuit board
Not all SMDs can be wave soldered. Packages with solder balls, and some leadless
packages which have solder lands underneath the body, cannot be wave soldered. Also,
leaded SMDs with leads having a pitch smaller than ~0.6 mm cannot be wave soldered,
due to an increased probability of bridging.
The re?ow soldering process involves applying solder paste to a board, followed by
component placement and exposure to a temperature pro?le. Leaded packages,
packages with solder balls, and leadless packages are all re?ow solderable.
Key characteristics in both wave and re?ow soldering are:
?
?
?
?
?
?
Board speci?cations, including the board ?nish, solder masks and vias
Package footprints, including solder thieves and orientation
The moisture sensitivity level of the packages
Package placement
Inspection and repair
Lead-free soldering versus SnPb soldering
15.3 Wave soldering
Key characteristics in wave soldering are:
PCA9531_6
? NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 06 — 19 February 2009
22 of 27
相关PDF资料
PDF描述
PCA9532D,118 IC LED DRIVER RGB 24-SOIC
PCA9533DP/01,118 IC LED DRIVER RGB 8-TSSOP
PCA9550DP,118 IC LED DRIVER BLINKER 8-TSSOP
PCA9551BS,118 IC LED DRIVER BLINKER 16-HVQFN
PCA9552D,118 IC LED DRIVER BLINKER 24-SOIC
相关代理商/技术参数
参数描述
PCA9532 制造商:NXP Semiconductors 功能描述:IC ((NW))
PCA9532BS 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:16-bit I2C-bus LED dimmer
PCA9532BS,118 功能描述:LED照明驱动器 I2C LED DIMMER 16BIT RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
PCA9532BS-T 功能描述:LED照明驱动器 I2C LED DIMMER 16BIT RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N
PCA9532D 功能描述:LED照明驱动器 I2C LED DIMMER 16BIT RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N